ETC Awards Limited · RQF Level 4
ETCAL Level 4 NVQ Extended Diploma in Engineering Manufacture
You don’t just earn this. You learn to use it, one-to-one, on your own real work.
- LevelRQF Level 4
- Total credits107
- Guided learning476 hours
- Units in this qualification182
Awarded by ETC Awards Limited · on the Ofqual register
Start here
See how this course maps onto your role
Ten quick questions, one per Future Fluency, asked against this qualification rather than a generic one.
Check my fluency, free
About 5 minutes · No card · Nothing to commit to
What you’ll learn
What each unit actually teaches you to do
The Level 4 NVQ Extended Diploma is a vocationally-related qualification for those in engineering manufacture. It allows learners to develop skills in areas such as pattern making, risk assessment and maintenance activities. Learners will also gain an understanding of statutory regulations and value management.
These are the units ETC Awards Limited registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated, and every one you earn is yours to keep.
Address performance problems affecting team membersReal unit · ETC Awards Limited
It teaches you to address performance problems affecting team members within legal and organisational frameworks. You'll identify issues, communicate effectively and sensitively, and establish action plans to improve performance.
What you'll be able to do
- Understand legal requirements, industry regulations, organisational policies and professional codes concerning performance management.
- Identify performance problems affecting team members, using appropriate methods.
- Discuss performance problems constructively with team members, maintaining confidentiality and respect.
- Set a clear and actionable course of action to address identified performance problems with team members.
Agree a budgetReal unit · ETC Awards Limited
This unit provides learners with knowledge of budgeting processes within organisations, including methods for budget development and stakeholder negotiation. You'll be able to develop and agree budgets aligned with organisational requirements.
What you'll be able to do
- Understand the methods used to develop budgets within an organisation
- Agree a budget that meets organisational requirements and constraints
Analyse the market in which your organisation operatesReal unit · ETC Awards Limited
You'll analyse customer needs and the market environment using research tools and techniques. The unit develops skills to communicate research findings effectively to inform managerial decisions and identify opportunities for new products or services.
What you'll be able to do
- Analyse customers’ needs within the organisation's market.
- Analyse the market using appropriate research tools and techniques.
- Communicate research findings effectively to inform managerial decisions.
Applying quality function deployment _QFD_Real unit · ETC Awards Limited
It teaches you to apply quality function deployment (QFD) by constructing a House of Quality matrix, translating customer needs into technical requirements, analysing relationships, and prioritising requirements to guide product or service development.
What you'll be able to do
- Apply quality function deployment (QFD) in a business context
- Demonstrate knowledge of how to apply quality function deployment (QFD)
Assembling Structural Sub Assemblies to Produce a Public Service VehicleReal unit · ETC Awards Limited
You'll assemble structural sub-assemblies for public service vehicles by interpreting engineering drawings and instructions. The unit covers accurate assembly techniques, inspection of sub-assemblies, and reporting of defects or discrepancies.
What you'll be able to do
- Assemble structural sub-assemblies accurately and efficiently to produce a public service vehicle, according to specified drawings and instructions.
- Assemble structural sub-assemblies to produce a public service vehicle, understanding the correct techniques and procedures.
Assembling and testing electronic circuitsReal unit · ETC Awards Limited
It teaches you to assemble and test electronic circuits following schematic diagrams. You'll identify, position, and solder components accurately, use multimetres to measure electrical parametres, and verify circuit functionality and performance.
What you'll be able to do
- Assemble electronic circuits following schematic diagrams
- Test electronic circuits to verify functionality and performance
- Know the correct methods for assembling electronic circuits
- Use testing equipment to diagnose faults in electronic circuits
Assembling and testing fluid power systemsReal unit · ETC Awards Limited
You'll assemble and test fluid power systems according to engineering drawings and specifications. The unit includes component selection, system assembly, testing methods, and performance verification to ensure system functionality.
What you'll be able to do
- Assemble fluid power systems according to engineering drawings and specifications
- Test assembled fluid power systems to ensure they meet performance requirements
- Know the correct procedures for assembling fluid power systems
- Know the methods used to test fluid power systems
Assembling pattern, model and engineering woodwork componentsReal unit · ETC Awards Limited
This unit covers the assembly of pattern, model, and engineering woodwork components. You'll learn to interpret specifications and drawings, select appropriate tools, and assemble components to meet specified tolerances.
What you'll be able to do
- Assemble pattern, model and engineering woodwork components according to specifications and industry standards
- Know the correct procedures for assembling pattern, model and engineering woodwork components, including health and safety requirements
Assembling, wiring and testing electrical panels/components mounted in enclosuresReal unit · ETC Awards Limited
You'll learn to assemble, wire, and test electrical panels and components mounted in enclosures. The unit covers interpreting layouts and wiring diagrams, applying appropriate wiring techniques, and verifying functionality and safety through testing.
What you'll be able to do
- Assemble, wire, and test electrical panels and components mounted in enclosures, adhering to relevant industry standards and safety regulations
- Demonstrate knowledge of the principles and practices involved in assembling, wiring, and testing electrical panels and components mounted in enclosures, including component selection, wiring techniques, and testing procedures
Build, support and manage a teamReal unit · ETC Awards Limited
This unit provides learners with the knowledge to build, support, and manage effective teams by selecting appropriate members, conducting inductions, communicating roles, supporting development, managing performance, and understanding team dynamics and disbandment processes.
What you'll be able to do
- Understand the purpose and required attributes of a team
- Select team members that match the team’s requirements
- Induct team members into the team
- Communicate team members' roles and responsibilities effectively
- Understand how to support team development and growth
- Manage team performance to achieve objectives
- Understand the process of disbanding a team effectively
Carry out Maintenance Activities on Electrical EquipmentReal unit · ETC Awards Limited
You'll carry out maintenance activities on electrical equipment safely and effectively by following established procedures, adhering to safety regulations, documenting work, and understanding maintenance principles and practices.
What you'll be able to do
- Carry out maintenance activities on electrical equipment in accordance with established procedures and safety regulations.
- Understand the procedures and safety regulations for carrying out maintenance activities on electrical equipment.
Carry out Maintenance Activities on Electrical Equipment within an Engineered SystemReal unit · ETC Awards Limited
You'll carry out maintenance activities on electrical equipment within engineered systems, preparing equipment, following procedures, and documenting work. The unit emphasises safety compliance and identification of faults during maintenance tasks.
What you'll be able to do
- Carry out maintenance activities on electrical equipment within an engineered system
- Understand how to carry out maintenance activities on electrical equipment within an engineered system
Carry out Maintenance Activities on Fluid Power EquipmentReal unit · ETC Awards Limited
You'll carry out maintenance activities on fluid power equipment following established procedures and safety guidelines. The unit covers fault diagnosis, repair techniques, and documentation of maintenance activities to ensure effective system upkeep.
What you'll be able to do
- Carry out maintenance activities on fluid power equipment, following established procedures and safety guidelines
- Understand how to carry out maintenance activities on fluid power equipment, including fault diagnosis and repair techniques
Carry out Maintenance Activities on Fluid Power Equipment within an Engineered SystemReal unit · ETC Awards Limited
You'll carry out maintenance activities on fluid power equipment within engineered systems. The unit develops knowledge of inspection techniques, maintenance procedures according to manufacturer guidelines, and accurate documentation of maintenance tasks.
What you'll be able to do
- Carry out maintenance activities on fluid power equipment within an engineered system, adhering to safety regulations and manufacturer's guidelines.
- Understand the principles and procedures for carrying out maintenance activities on fluid power equipment within an engineered system.
- Understand the potential hazards associated with fluid power equipment and the necessary safety precautions.
Carry out Maintenance Activities on Instrumentation and Control EquipmentReal unit · ETC Awards Limited
It teaches you to carry out maintenance activities on instrumentation and control equipment according to manufacturer instructions. You'll use appropriate tools, document activities, and understand operational principles and safety requirements.
What you'll be able to do
- Carry out maintenance activities on instrumentation and control equipment according to manufacturer's instructions and relevant standards
- Understand the principles of operation of instrumentation and control equipment
- Understand the procedures for carrying out maintenance activities on instrumentation and control equipment
- Understand the relevant health and safety requirements when carrying out maintenance activities on instrumentation and control equipment
- Understand how to diagnose faults in instrumentation and control equipment
Carry out Maintenance Activities on Mechanical EquipmentReal unit · ETC Awards Limited
You'll carry out maintenance activities on mechanical equipment by following established procedures and safety regulations, performing tasks effectively, documenting maintenance, and understanding relevant maintenance principles and practices.
What you'll be able to do
- Carry out maintenance activities on mechanical equipment in accordance with established procedures and safety regulations.
- Understand the procedures and safety regulations for carrying out maintenance activities on mechanical equipment.
Carry out Maintenance Activities on Mechanical Equipment within an Engineered SystemReal unit · ETC Awards Limited
This unit focuses on maintenance activities for mechanical equipment within engineered systems, emphasising adherence to safety guidelines. You'll learn fault diagnosis, repair techniques, and accurate documentation of maintenance work.
What you'll be able to do
- Carry out maintenance activities on mechanical equipment within an engineered system, adhering to safety guidelines
- Understand the techniques and considerations for maintaining mechanical equipment within an engineered system
Carry out Maintenance Activities on Process Controller Equipment within an Engineered SystemReal unit · ETC Awards Limited
You'll learn to carry out maintenance activities on process controller equipment within engineered systems, including fault identification and rectification. The unit covers established maintenance procedures and documentation practices.
What you'll be able to do
- Carry out maintenance activities on process controller equipment within an engineered system, following established procedures
- Understand the principles and practices involved in maintaining process controller equipment within an engineered system
Carry out the Testing and Calibration of Instrumentation Control Equipment and CircuitsReal unit · ETC Awards Limited
This unit covers the procedures for testing and calibrating instrumentation control equipment and circuits. You'll learn to carry out accurate calibration to specified tolerances and record results systematically, ensuring compliance with technical standards.
What you'll be able to do
- Carry out the testing and calibration of instrumentation control equipment and circuits in accordance with established procedures.
- Understand the methods and techniques used to carry out the testing and calibration of instrumentation control equipment and circuits.
- Understand the relevant health and safety requirements when carrying out the testing and calibration of instrumentation control equipment and circuits.
Carrying out aircraft detail fitting activitiesReal unit · ETC Awards Limited
This unit provides learners with skills to carry out aircraft detail fitting activities by preparing components, fitting them securely, and inspecting to meet engineering specifications. You'll document fitting activities and understand principles of aircraft fitting accuracy.
What you'll be able to do
- Carry out aircraft detail fitting activities, ensuring components are fitted correctly and securely according to engineering specifications.
- Carry out aircraft detail fitting activities, understanding the principles of aircraft fitting and the importance of accuracy.
Carrying out design of experiments _DOE_Real unit · ETC Awards Limited
You'll carry out design of experiments (DOE) by planning activities, selecting methods, conducting experiments, and analysing results. The unit includes monitoring progress and troubleshooting to support effective experimental design and data interpretation.
What you'll be able to do
- Carry out design of experiments (DOE) effectively
- Carry out design of experiments (DOE) in a sustained manner
- Demonstrate knowledge of how to carry out design of experiments (DOE)
- Demonstrate sustained knowledge of how to carry out design of experiments (DOE)
Carrying out hand forging of engineering materialsReal unit · ETC Awards Limited
You'll carry out hand forging of engineering materials using appropriate tools and techniques. The unit covers shaping processes, heat treatment, and the principles underpinning hand forging operations.
What you'll be able to do
- Carry out hand forging of engineering materials, using appropriate tools and techniques
- Know the principles and methods of hand forging engineering materials, including heat treatment and shaping processes
Carrying out heat treatment of engineering materialsReal unit · ETC Awards Limited
You'll be able to carry out heat treatment of engineering materials following specified procedures and safety guidelines. The unit covers principles of heat treatment, various processes, and their effects on material properties.
What you'll be able to do
- Carry out heat treatment of engineering materials according to specified procedures and safety guidelines
- Understand the principles of heat treatment of engineering materials, including the different types of heat treatment processes and their effects on material properties
Carrying out maintenance activities on motorsport vehicle electrical equipmentReal unit · ETC Awards Limited
It teaches you to carry out maintenance activities on motorsport vehicle electrical equipment. You'll inspect equipment, replace faulty components according to manufacturer instructions, and test repaired equipment to ensure correct operation.
What you'll be able to do
- Carry out maintenance activities on motorsport vehicle electrical equipment according to specified procedures
- Carry out maintenance activities on motorsport vehicle electrical equipment safely and effectively
- Understand the maintenance requirements of motorsport vehicle electrical equipment
- Understand the safety precautions required when working on motorsport vehicle electrical equipment
Commission Engineering Products, Processes or FacilitiesReal unit · ETC Awards Limited
You'll commission engineering products, processes, or facilities following relevant standards and procedures. The unit covers verification of compliance with specifications, documentation of commissioning activities, and understanding the commissioning process and its purpose.
What you'll be able to do
- Commission engineering products, processes or facilities in accordance with relevant standards and procedures.
- Understand the processes and procedures involved in commissioning engineering products, processes or facilities.
Commission a new product manufacturing processReal unit · ETC Awards Limited
This unit covers the commissioning of a new product manufacturing process, including implementing the commissioning steps and verifying that the process meets specified performance and quality standards. You'll gain knowledge of testing procedures and validation techniques essential for successful commissioning.
What you'll be able to do
- Commission a new product manufacturing process, ensuring it meets specified performance and quality standards
- Understand how to commission a new product manufacturing process, including testing, optimisation, and documentation
Complying with statutory regulations and organisational safety requirementsReal unit · ETC Awards Limited
This unit covers compliance with statutory regulations and organisational safety requirements in engineering. You'll demonstrate adherence to regulations, follow reporting procedures, and understand safety importance in practice.
What you'll be able to do
- Comply with statutory regulations and organisational safety requirements in an engineering environment.
- Comply with statutory regulations and organisational safety requirements, understanding the relevant legislation and procedures.
Conducting business improvement activitiesReal unit · ETC Awards Limited
It teaches you to conduct business improvement activities safely and effectively. You'll understand the purpose of such activities, use appropriate PPE, and follow organisational procedures.
What you'll be able to do
- Conduct business improvement activities in a safe and effective manner
- Understand how to conduct business improvement activities, including the relevant tools and techniques
Configure Engineering Products, Processes or FacilitiesReal unit · ETC Awards Limited
You'll learn to configure engineering products, processes, or facilities to meet specified performance criteria. The unit includes documenting configuration processes and evaluating their effectiveness, providing an understanding of configuration methods and techniques.
What you'll be able to do
- Configure engineering products, processes or facilities in accordance with specified requirements
- Understand the methods and techniques used to configure engineering products, processes or facilities
Contribute to a team feasibility review of a new product designReal unit · ETC Awards Limited
This unit develops learners' ability to contribute to a team feasibility review of a new product design. You'll identify key feasibility factors, communicate findings clearly, and participate actively in team discussions and decision-making.
What you'll be able to do
- Contribute effectively to a team feasibility review of a new product design.
- Understand the processes involved in contributing to a team feasibility review of a new product design.
Control the New Product Design Change ProcessReal unit · ETC Awards Limited
This unit equips learners to control the new product design change process by understanding and implementing organisational procedures, documenting changes accurately, and recognising the potential consequences of design modifications within a project context.
What you'll be able to do
- Control the new product design change process in accordance with organisational procedures
- Understand the importance of controlling the new product design change process effectively
- Understand the relevant documentation and approval processes required for new product design changes
Create Engineering DesignsReal unit · ETC Awards Limited
It teaches you to create engineering designs that meet specifications and adhere to industry standards. You'll understand the design process, including planning, development, documentation, and justifying design choices based on functional requirements and constraints.
What you'll be able to do
- Create engineering designs in accordance with given specifications and industry standards
- Understand the processes involved in creating engineering designs, including planning, development, and documentation
Cutting and shaping materials using thermal cutting equipmentReal unit · ETC Awards Limited
You'll safely and effectively cut and shape materials using thermal cutting equipment. The unit covers selection, setup, operation, and inspection of equipment and materials to achieve required dimensions and tolerances.
What you'll be able to do
- Cut and shape materials using thermal cutting equipment, following safety procedures and achieving the required dimensions and tolerances.
- Cut and shape materials using thermal cutting equipment, understanding the properties of different materials and the operation of thermal cutting equipment.
Determine Welding and Related Technical Requirements to Achieve ObjectivesReal unit · ETC Awards Limited
It teaches you to determine welding and related technical requirements to achieve engineering objectives. You'll select suitable welding processes, parametres, consumables, and specify pre- and post-weld treatments based on material and design needs.
What you'll be able to do
- Determine welding technical requirements to achieve objectives
- Determine related technical requirements to achieve objectives
- Understand how to determine welding technical requirements to achieve objectives
- Understand how to determine related technical requirements to achieve objectives
Determine the Requirements for Engineering ActivitiesReal unit · ETC Awards Limited
It teaches you to determine requirements for engineering activities in compliance with relevant standards and regulations. You'll consider cost, performance, and safety factors, and document requirements based on project objectives.
What you'll be able to do
- Determine the requirements for engineering activities, ensuring they meet specified standards and regulations
- Understand how to determine the requirements for engineering activities, considering factors such as cost, performance, and safety
Develop a Research Methodology for EngineeringReal unit · ETC Awards Limited
You'll learn to create a research methodology for engineering projects, including defining objectives, selecting methods, and planning resources. The unit covers justification of chosen methodologies with reference to relevant litreature.
What you'll be able to do
- Develop a research methodology suitable for an engineering project
- Understand the processes involved in developing a research methodology for engineering, including data collection and analysis techniques
Develop a Strategy for the Engineering Design ProcessReal unit · ETC Awards Limited
You'll develop a strategy for the engineering design process by analysing factors and constraints, aligning the strategy with project goals, justifying their approach, and understanding various methods and techniques applicable to design processes.
What you'll be able to do
- Develop a strategy for the engineering design process, taking into account relevant factors and constraints.
- Understand the methods and techniques used to develop a strategy for the engineering design process.
Develop a new product manufacturing process design strategyReal unit · ETC Awards Limited
This unit develops learners' ability to create a new product manufacturing process design strategy. You'll define objectives, evaluate manufacturing options, and develop detailed strategies considering cost, quality, and efficiency factors.
What you'll be able to do
- Develop a new product manufacturing process design strategy that meets specified requirements.
- Understand the factors to consider when developing a new product manufacturing process design strategy.
Develop a new product manufacturing process flow and floor plan layoutReal unit · ETC Awards Limited
You'll develop a new product manufacturing process flow and floor plan layout by creating and optimising process flows and layouts for efficiency and safety, considering material flow, equipment placement, ergonomics, and compliance with safety requirements.
What you'll be able to do
- Develop a new product manufacturing process flow and floor plan layout that optimises efficiency and safety.
- Understand the principles and techniques involved in developing a new product manufacturing process flow and floor plan layout, considering factors such as material flow, equipment placement, and ergonomics.
Develop and evaluate operational plans for own area of responsibilityReal unit · ETC Awards Limited
It teaches you to develop, implement, monitor, and evaluate operational plans aligned with organisational objectives. You'll communicate plans effectively, delegate tasks, and assess progress within their area of responsibility.
What you'll be able to do
- Align objectives of own area of responsibility with the overall objectives of the organisation
- Implement operational plans effectively within own area of responsibility
- Monitor the progress of operational plans in own area of responsibility against agreed targets
- Evaluate the effectiveness of operational plans in own area of responsibility and identify areas for improvement
Develop and implement a risk assessment plan in own area of responsibiltyReal unit · ETC Awards Limited
You'll develop knowledge of health and safety legislation and personal responsibilities within an organisation. The unit covers promoting health and safety practices, identifying and managing hazards and risks, and monitoring compliance in their area of responsibility.
What you'll be able to do
- Understand the legal requirements for health and safety within an organisation
- Understand personal responsibilities for health and safety within an organisation
- Promote the importance of health and safety practices within the workplace
- Ensure that hazards are identified in own area of responsibility
- Ensure that risks are identified in own area of responsibility
- Manage hazards in own area of responsibility
- Manage risks in own area of responsibility
- Monitor health and safety performance in own area of responsibility
- Review health and safety performance in own area of responsibility
- Monitor health and safety policy in own area of responsibility
- Review health and safety policy in own area of responsibility
Develop and implement marketing plansReal unit · ETC Awards Limited
You'll develop and implement marketing plans aligned with business objectives within their area of responsibility. The unit covers market analysis, strategy development, resource allocation, and monitoring and evaluation of marketing activities.
What you'll be able to do
- Identify and prioritise marketing objectives for own area of responsibility, aligning them with overall business goals.
- Produce a marketing strategy in own area of responsibility, considering market trends and competitive landscape.
- Produce and implement a marketing plan for own area of responsibility, allocating resources effectively and setting measurable targets.
- Monitor and evaluate the marketing plan in own area of responsibility, analysing performance data and making necessary adjustments.
Develop working relationships with colleagues and stakeholdersReal unit · ETC Awards Limited
This unit covers the identification and analysis of key stakeholders relevant to an organisation. You'll learn to establish and maintain working relationships with colleagues and stakeholders, fostering an environment of trust and mutual respect.
What you'll be able to do
- Identify key stakeholders relevant to the organisation, considering their roles, responsibilities, and interests.
- Analyse the relevance of each stakeholder to the organisation's objectives and activities.
- Understand how to establish effective working relationships with colleagues, based on mutual respect and open communication.
- Understand how to establish effective working relationships with stakeholders, considering their specific needs and expectations.
- Create an environment of trust with colleagues by demonstrating integrity, reliability, and empathy.
- Create an environment of mutual respect with colleagues by valuing their contributions and perspectives.
- Create an environment of trust with stakeholders by being transparent, honest, and accountable.
- Create an environment of mutual respect with stakeholders by listening to their concerns and addressing their needs.
Develop, maintain and review personal networksReal unit · ETC Awards Limited
You'll develop, maintain, and review personal networks for professional development and career advancement. They will understand the benefits of networking, comply with data protection regulations, and apply confidentiality principles when sharing information.
What you'll be able to do
- Understand the benefits of developing and maintaining a personal network of contacts for professional development and career advancement
- Understand the importance of data privacy and confidentiality when networking
- Develop a personal network of contacts relevant to own professional role and career aspirations
- Review networking relationships to assess their effectiveness and identify opportunities for improvement
- Maintain networking relationships through regular communication and engagement
Diagnosing and rectifying faults on motorsport vehicle systems during competitionReal unit · ETC Awards Limited
You'll learn to diagnose and rectify faults on motorsport vehicle systems during competition. The unit covers selecting diagnostic techniques, using equipment to identify faults, interpreting data, and efficiently rectifying issues to minimise downtime.
What you'll be able to do
- Diagnose faults on motorsport vehicle systems during competition using appropriate techniques
- Rectify faults on motorsport vehicle systems during competition efficiently and effectively
- Describe the methods used to diagnose faults on motorsport vehicle systems during competition
- Explain the procedures for rectifying faults on motorsport vehicle systems during competition
Ensure compliance with legal, regulatory, ethical and social requirementsReal unit · ETC Awards Limited
You'll ensure compliance with legal, regulatory, ethical, and social requirements within their area of responsibility. The unit covers monitoring compliance, identifying non-compliance, and recommending improvements.
What you'll be able to do
- Monitor the operational compliance of procedures in meeting legal, regulatory, ethical and social requirements within own area of responsibility.
- Identify areas of non-compliance with procedures for legal, regulatory, ethical and social requirements relating to own area of responsibility and make appropriate recommendations for improvement.
Establish an Engineering Design BriefReal unit · ETC Awards Limited
This unit covers establishing an engineering design brief by defining project scope and objectives, identifying stakeholders and their requirements, specifying functional and performance criteria, and documenting information clearly and concisely.
What you'll be able to do
- Establish a comprehensive engineering design brief.
- Understand the key considerations and processes involved in establishing an effective engineering design brief.
Establish manufacturing process design brief for new product introductionReal unit · ETC Awards Limited
It teaches you to establish a manufacturing process design brief for new product introduction by defining scope and objectives, identifying stakeholders, specifying functional and performance requirements, and documenting relevant information clearly.
What you'll be able to do
- Establish a manufacturing process design brief for the introduction of a new product.
- Understand the key considerations and processes involved in establishing a manufacturing process design brief for new product introduction.
Establish new product development and introduction briefReal unit · ETC Awards Limited
It teaches you to establish a new product development and introduction brief aligned with organisational objectives and market needs. You'll define and evaluate the brief, assessing market opportunities and organisational alignment.
What you'll be able to do
- Establish a new product development and introduction brief, ensuring it aligns with organisational objectives and market needs
- Understand the key considerations and processes involved in establishing a comprehensive new product development and introduction brief
Evaluate Engineering DesignsReal unit · ETC Awards Limited
This unit equips learners to evaluate engineering designs against specified criteria. You'll identify potential issues, analyse functionality, reliability, and manufacturability, and document the evaluation process and findings.
What you'll be able to do
- Evaluate engineering designs against specified criteria, identifying potential issues and areas for improvement
- Understand how to evaluate engineering designs, considering factors such as functionality, reliability, and manufacturability
Evaluate Engineering Risk AssessmentsReal unit · ETC Awards Limited
You'll evaluate engineering risk assessments by analysing hazard identification and risk analysis methodologies. This unit develops understanding of assessment scope, objectives, and the validity and reliability of conclusions.
What you'll be able to do
- Evaluate engineering risk assessments to determine their validity and reliability
- Understand the methodologies used to evaluate engineering risk assessments, including hazard identification and risk analysis
Evaluate the Results of Engineering ResearchReal unit · ETC Awards Limited
It teaches you to evaluate engineering research results by assessing validity, reliability, and significance. You'll understand research methodologies and justify conclusions drawn from research outcomes.
What you'll be able to do
- Evaluate the results of engineering research, considering the validity, reliability, and significance of the findings
- Understand the methodologies used in engineering research and how these impact the interpretation of results
Fettling, finishing and checking cast componentsReal unit · ETC Awards Limited
This unit covers fettling, finishing, and checking cast components, enabling learners to remove excess material, achieve required surface quality, and verify dimensional accuracy using appropriate tools and measuring equipment in accordance with quality standards.
What you'll be able to do
- Fettle, finish and check cast components to meet the required standards
- Demonstrate knowledge of the fettling, finishing and checking processes for cast components
Finishing surfaces by applying coatings or coveringsReal unit · ETC Awards Limited
You'll develop the ability to finish surfaces by applying coatings or coverings according to quality standards. The unit covers surface preparation, application procedures, safety guidelines, and evaluation of finished surfaces for defects.
What you'll be able to do
- Finish surfaces effectively by applying appropriate coatings or coverings, adhering to safety guidelines and industry standards
- Know the correct procedures for preparing surfaces prior to the application of coatings or coverings
- Know the different types of coatings and coverings available and their suitability for various applications
- Know the health and safety requirements associated with applying coatings and coverings, including the use of personal protective equipment (PPE)
Finishing surfaces by applying treatmentsReal unit · ETC Awards Limited
You'll gain skills to prepare and apply surface finishing treatments according to specified requirements. The unit covers different finishing methods, quality standards, and safety regulations to ensure effective and compliant surface treatment.
What you'll be able to do
- Finish surfaces effectively by applying appropriate treatments, adhering to specified quality standards and safety regulations
- Demonstrate knowledge of different surface finishing treatments, their application methods, and the factors influencing their selection for various materials and purposes
Fitting Sub Assemblies and Components to Public Service VehiclesReal unit · ETC Awards Limited
You'll gain practical skills to fit sub-assemblies and components to Public Service Vehicles according to manufacturer specifications. The unit includes vehicle preparation, correct fitting techniques, and understanding relevant procedures.
What you'll be able to do
- Fit sub-assemblies to public service vehicles according to manufacturer's specifications
- Fit components to public service vehicles according to manufacturer's specifications
- Describe the correct procedures for fitting sub-assemblies to public service vehicles
- Explain the correct procedures for fitting components to public service vehicles
Forming and assembling electrical cable enclosure and support systemsReal unit · ETC Awards Limited
You'll learn to form and assemble electrical cable enclosure and support systems to specified dimensions. The unit includes material preparation, assembly using appropriate methods, and checking systems against specifications while adhering to safety procedures.
What you'll be able to do
- Form electrical cable enclosure and support systems to meet specified requirements
- Assemble electrical cable enclosure and support systems according to industry standards
- Know the procedures for forming electrical cable enclosure and support systems safely
- Know the correct techniques for assembling electrical cable enclosure and support systems
Forming and assembling pipework systemsReal unit · ETC Awards Limited
You'll learn to form and assemble pipework systems to specified dimensions and tolerances. The unit covers cutting, preparing, bending pipe sections, assembling systems using various joining methods, and sealing joints to prevent leaks.
What you'll be able to do
- Form pipework systems to meet specified dimensions and tolerances
- Assemble pipework systems using appropriate joining techniques
- Know the procedures for forming pipework systems safely and effectively
- Know the different methods for assembling pipework systems and their applications
General electrical and electronic engineering applicationsReal unit · ETC Awards Limited
This unit provides learners with the skills to carry out general electrical and electronic engineering applications safely and effectively. You'll understand circuit design principles, testing practices, fault finding, and adhere to safety regulations.
What you'll be able to do
- Carry out general electrical and electronic engineering applications, following established procedures and safety regulations
- Understand the principles and practices of general electrical and electronic engineering applications, including circuit design, testing, and fault finding
General fabrication and welding applicationsReal unit · ETC Awards Limited
You'll perform general fabrication and welding tasks safely and effectively. The unit covers cutting, shaping, and joining materials, performing welding applications using specified techniques, and understanding safe use of welding equipment.
What you'll be able to do
- Carry out general fabrication tasks, including cutting, shaping, and joining materials
- Perform welding applications using appropriate techniques and equipment
- Understand the principles of fabrication and welding processes
- Identify different types of welding techniques and their applications
- Recognise the materials suitable for fabrication and welding
- Understand the health and safety requirements when carrying out fabrication and welding activities
General machining, fitting and assembly applicationsReal unit · ETC Awards Limited
You'll carry out general machining, fitting, and assembly operations to specified tolerances and requirements. The unit covers principles and techniques for machining, fitting, and assembling components accurately using engineering drawings.
What you'll be able to do
- Carry out general machining, fitting and assembly applications to specified requirements
- Understand how to carry out general machining, fitting and assembly applications, including the use of appropriate tools and techniques
General maintenance engineering applicationsReal unit · ETC Awards Limited
This unit covers general maintenance engineering applications, including carrying out maintenance tasks following procedures and safety protocols. You'll learn to diagnose faults, use appropriate tools, and inspect maintenance work for quality assurance.
What you'll be able to do
- Carry out general maintenance engineering applications, following established procedures and safety protocols
- Diagnose common faults in engineering systems and equipment
- Select and use appropriate tools and equipment for general maintenance tasks
- Document maintenance activities accurately and completely
Identify Engineering Design Requirements of ClientsReal unit · ETC Awards Limited
It teaches you to identify engineering design requirements of clients through effective communication and analysis. You'll apply methods to gather and document client needs accurately.
What you'll be able to do
- Identify engineering design requirements of clients through effective communication and analysis of their needs.
- Understand the processes and techniques used to identify and document engineering design requirements of clients, ensuring clarity and accuracy.
Identify and Define Areas of Engineering ResearchReal unit · ETC Awards Limited
This unit covers the identification and definition of engineering research areas by analysing current industry trends and challenges. You'll learn to justify suitable research topics within specific engineering fields, applying appropriate methodologies to define relevant research areas.
What you'll be able to do
- Identify and define specific areas suitable for engineering research, considering current industry trends and challenges
- Understand the methodologies and processes involved in identifying and defining relevant areas of engineering research
Implement Engineering ProcessesReal unit · ETC Awards Limited
You'll understand the purpose and rationale of engineering processes and develop the ability to implement these processes according to specified procedures and guidelines. The unit emphasises adherence to established protocols to ensure effective engineering practice.
What you'll be able to do
- Implement established engineering processes according to specified procedures and guidelines.
- Understand the purpose and rationale behind different engineering processes.
- Understand how to effectively implement engineering processes in a practical setting.
- Understand the importance of adhering to engineering processes to ensure quality and consistency.
Implement Quality Assurance Methods and ProceduresReal unit · ETC Awards Limited
It teaches you to implement quality assurance methods and procedures to ensure products or processes meet specified requirements. You'll apply, monitor, and evaluate these methods within an organisational context.
What you'll be able to do
- Implement quality assurance methods and procedures to ensure products or processes meet specified requirements
- Understand the application of quality assurance methods and procedures within an organisation
Implement Welding Production Methods and ProceduresReal unit · ETC Awards Limited
It teaches you to implement welding production methods and procedures in line with industry standards and safety regulations. You'll apply welding techniques, maintain safety compliance, and document production processes effectively.
What you'll be able to do
- Implement welding production methods and procedures in accordance with industry standards and safety regulations
- Understand the principles and techniques involved in implementing welding production methods and procedures
Implement change in own area of responsibilityReal unit · ETC Awards Limited
You'll implement change within their area of responsibility by applying change management principles. The unit covers involving and supporting others through change, overcoming barriers, and monitoring the implementation of change plans.
What you'll be able to do
- Understand the principles and processes involved in implementing change within own area of responsibility.
- Involve and support others effectively throughout the change process.
- Implement and monitor a plan for change effectively within own area of responsibility.
Improve the Quality of Engineering Products or ProcessesReal unit · ETC Awards Limited
You'll learn to improve the quality of engineering products or processes by identifying improvement areas and applying quality techniques. The unit includes implementing changes and evaluating their effectiveness based on quality principles.
What you'll be able to do
- Improve the quality of engineering products or processes using appropriate techniques
- Understand the methods and strategies used to improve the quality of engineering products or processes, including quality control and assurance
Inspect Welded Components or Structures for Visual Quality and Dimensional AccuracyReal unit · ETC Awards Limited
This unit covers the inspection of welded components or structures for visual quality and dimensional accuracy. You'll use appropriate techniques and equipment to identify defects and ensure compliance with quality standards.
What you'll be able to do
- Inspect welded components or structures for visual quality and dimensional accuracy, using appropriate techniques and equipment
- Understand the principles and procedures for inspecting welded components or structures to ensure quality and dimensional accuracy
Inspecting a motorsport vehicle during a competitionReal unit · ETC Awards Limited
This unit equips learners to inspect motorsport vehicles during competitions by conducting thorough inspections, identifying defects or non-compliance with regulations, communicating findings clearly, and documenting the inspection process accurately.
What you'll be able to do
- Inspect a motorsport vehicle during a competition, adhering to competition regulations
- Demonstrate knowledge of the inspection procedures and regulations applicable to motorsport vehicles during competition
Installing aircraft mechanical fastenersReal unit · ETC Awards Limited
This unit provides learners with skills to select and install aircraft mechanical fasteners using approved procedures. You'll understand fastener types, installation techniques, and quality inspection to ensure compliance with standards.
What you'll be able to do
- Install aircraft mechanical fasteners correctly and in accordance with approved procedures
- Understand how to install aircraft mechanical fasteners, including fastener types, installation techniques, and quality control measures
Investigate Incidents Relating to Engineering ActivitiesReal unit · ETC Awards Limited
You'll learn to investigate engineering incidents by reporting, documenting, and analysing contributing factors. The unit covers systematic methods to determine root causes and recommend preventative measures within engineering contexts.
What you'll be able to do
- Investigate incidents related to engineering activities thoroughly and systematically, following established protocols
- Understand the methods and techniques used to investigate incidents, determine root causes, and recommend preventative measures in engineering contexts
Joining Public Service Vehicle Components by Mechanical ProcessesReal unit · ETC Awards Limited
You'll gain the skills to join Public Service Vehicle components using mechanical processes, ensuring accuracy and quality. The unit includes understanding joining methods, selecting appropriate tools, and applying correct techniques.
What you'll be able to do
- Join Public Service Vehicle components using appropriate mechanical processes, ensuring accuracy and quality
- Understand the methods and techniques used to join Public Service Vehicle components by mechanical processes, including the selection of appropriate tools and materials
Know how to follow disciplinary proceduresReal unit · ETC Awards Limited
This unit provides knowledge of following disciplinary procedures within organisations. You'll understand performance expectations, use communication methods to assess misconduct, and manage informal and formal processes.
What you'll be able to do
- Understand the performance expectations of an organisation, including standards of behaviour and conduct.
- Identify and use appropriate communication methods to assess potential cases of misconduct or unsatisfactory performance, gathering relevant information and evidence.
- Deal informally with cases of minor misconduct or unsatisfactory performance, providing guidance and support to address the issues.
- Follow an organisation’s formal disciplinary procedure when dealing with more serious cases of misconduct or persistent unsatisfactory performance.
Lead Electrical/Electronic Product Manufacturing or Testing ActivitiesReal unit · ETC Awards Limited
This unit covers the leadership of electrical and electronic product manufacturing or testing activities. You'll learn to plan, organise, supervise, and monitor these activities, ensuring efficient resource management and adherence to quality standards.
What you'll be able to do
- Lead electrical/electronic product manufacturing activities effectively
- Lead electrical/electronic product testing activities effectively
- Understand the principles and practices of leading electrical/electronic product manufacturing or testing activities
Lead Installation or Commissioning ActivitiesReal unit · ETC Awards Limited
This unit develops learners' ability to lead installation or commissioning activities, managing resources and adhering to project plans and timelines. You'll gain knowledge of effective communication and leadership skills required during these processes.
What you'll be able to do
- Lead installation or commissioning activities, ensuring projects are completed efficiently and effectively
- Understand the leadership skills and technical knowledge required to lead installation or commissioning activities
Lead Maintenance ActivitiesReal unit · ETC Awards Limited
It teaches you to lead maintenance activities safely and effectively. You'll understand planning, resource allocation, team management, and regulatory compliance within maintenance contexts.
What you'll be able to do
- Lead maintenance activities, ensuring they are carried out safely and effectively
- Understand the principles of leading maintenance activities, including planning, resource allocation, and team management
Lead Mechanical Manufacturing or Inspection ActivitiesReal unit · ETC Awards Limited
This unit develops learners' ability to lead mechanical manufacturing or inspection activities safely and efficiently. You'll ensure compliance with relevant standards and procedures while applying leadership skills to manage manufacturing and inspection processes.
What you'll be able to do
- Lead mechanical manufacturing or inspection activities, ensuring they are carried out safely, efficiently, and in accordance with relevant standards and procedures.
- Understand the leadership skills and technical knowledge required to lead mechanical manufacturing or inspection activities, including team management, problem-solving, and quality control.
Lead Rail Welding ActivitiesReal unit · ETC Awards Limited
You'll develop the knowledge and skills to lead rail welding activities, ensuring compliance with standards and quality requirements. They will supervise teams and understand the processes and safety considerations involved in rail welding.
What you'll be able to do
- Lead rail welding activities in accordance with relevant standards and procedures
- Understand the processes and procedures involved in leading rail welding activities
- Understand the relevant health and safety requirements when leading rail welding activities
- Understand the importance of quality control when leading rail welding activities
Lead Welding and Fabrication ActivitiesReal unit · ETC Awards Limited
This unit develops learners' ability to lead welding and fabrication activities by delegating tasks, monitoring safety compliance, ensuring quality standards, and managing resources effectively within welding and fabrication processes.
What you'll be able to do
- Lead welding and fabrication activities, ensuring adherence to safety regulations and quality standards
- Understand the leadership skills and technical knowledge required to effectively lead welding and fabrication activities
Leading continuous improvement _Kaizen_ activitiesReal unit · ETC Awards Limited
You'll develop the ability to lead continuous improvement (Kaizen) activities by planning and coordinating events, engaging stakeholders, facilitating problem-solving, and monitoring the effectiveness of implemented solutions.
What you'll be able to do
- Lead continuous improvement (Kaizen) activities.
- Continue to lead continuous improvement (Kaizen) activities.
- Lead continuous improvement (Kaizen) activities.
- Continue to develop knowledge of how to lead continuous improvement (Kaizen) activities.
Leading failure modes and effects analysis _FMEA_ activitiesReal unit · ETC Awards Limited
You'll gain skills to lead Failure Modes and Effects Analysis (FMEA) activities by facilitating identification and assessment of potential failure modes. The unit includes prioritising risks and developing corrective actions to mitigate identified failures.
What you'll be able to do
- Lead failure modes and effects analysis (FMEA) activities effectively.
- Demonstrate the ability to lead failure modes and effects analysis (FMEA) activities consistently.
- Understand the processes involved in leading failure modes and effects analysis (FMEA) activities.
- Lead failure modes and effects analysis (FMEA) activities in a professional manner.
Leading measurement systems analysis _MSA_ activitiesReal unit · ETC Awards Limited
You'll develop the competence to lead measurement systems analysis (MSA) activities, including planning studies, selecting appropriate methods, conducting data collection and analysis, interpreting results, and identifying measurement errors to support quality improvement.
What you'll be able to do
- Lead measurement systems analysis (MSA) activities effectively
- Lead measurement systems analysis (MSA) activities in a sustained manner
- Demonstrate knowledge of how to lead measurement systems analysis (MSA) activities
- Demonstrate sustained knowledge of how to lead measurement systems analysis (MSA) activities
Leading mistake/error proofing _Poka Yoke_ activitiesReal unit · ETC Awards Limited
It teaches you to lead mistake and error proofing (Poka Yoke) activities by facilitating error identification and implementing preventative techniques. You'll evaluate the effectiveness of Poka Yoke solutions across operational areas.
What you'll be able to do
- Lead mistake/error proofing (Poka Yoke) activities effectively.
- Demonstrate the ability to lead mistake/error proofing (Poka Yoke) activities consistently.
- Understand the processes involved in leading mistake/error proofing (Poka Yoke) activities.
- Lead mistake/error proofing (Poka Yoke) activities in a professional manner.
Leading statistical process control _SPC_ activitiesReal unit · ETC Awards Limited
You'll gain the skills to lead statistical process control (SPC) activities by planning and delegating tasks, implementing SPC charts and techniques, analysing data to identify variations, and applying corrective actions to maintain process control.
What you'll be able to do
- Lead statistical process control (SPC) activities to monitor and improve processes.
- Lead the ongoing statistical process control (SPC) activities, analysing data and implementing corrective actions.
- Lead statistical process control (SPC) activities to identify and address process variations.
- Lead statistical process control (SPC) activities, interpreting data and communicating findings to relevant stakeholders.
Leading the application of Six Sigma methodology to a projectReal unit · ETC Awards Limited
It teaches you to lead the application of Six Sigma methodology in projects. You'll plan project scope and objectives, organise resources, monitor progress, implement Six Sigma tools, and evaluate solutions to maintain project momentum.
What you'll be able to do
- Lead the application of Six Sigma methodology to a project.
- Continue to lead the application of Six Sigma methodology to a project.
- Lead the application of Six Sigma methodology to a project.
- Continue to develop knowledge of how to lead the application of Six Sigma methodology to a project.
Leading the application of Six Sigma metrics to a projectReal unit · ETC Awards Limited
It teaches you to lead the application of Six Sigma metrics to projects by developing plans, delegating data collection and analysis tasks, and implementing methodologies such as DMAIC. You'll monitor project progress and apply data-driven decision-making to drive improvements.
What you'll be able to do
- Lead the application of Six Sigma metrics to a project to drive improvements.
- Lead the ongoing application of Six Sigma metrics to a project, tracking progress and making necessary adjustments.
- Lead the application of Six Sigma metrics to a project effectively.
- Lead the application of Six Sigma metrics to a project, ensuring accurate data collection and analysis.
Leading the application of basic statistical analysisReal unit · ETC Awards Limited
You'll gain skills to lead the application of basic statistical analysis to solve problems and support decision-making. The unit includes planning analysis, delegating data collection, applying statistical techniques, interpreting results, and recommending actions.
What you'll be able to do
- Lead the application of basic statistical analysis to solve problems and improve decision-making.
- Lead the ongoing application of basic statistical analysis, interpreting results and recommending actions.
- Lead the application of basic statistical analysis techniques.
- Lead the application of basic statistical analysis, presenting findings clearly and concisely to different audiences.
Leading the carrying out of Six Sigma process mappingReal unit · ETC Awards Limited
It teaches you to lead the carrying out of Six Sigma process mapping by defining its purpose and scope, guiding data collection, and ensuring the accuracy and completeness of process maps. You'll evaluate and refine mapping techniques to support continuous improvement initiatives.
What you'll be able to do
- Lead the carrying out of Six Sigma process mapping, ensuring accuracy and completeness.
- Continue to lead the carrying out of Six Sigma process mapping, refining the process and identifying areas for improvement.
- Lead the carrying out of Six Sigma process mapping effectively.
- Continue leading the carrying out of Six Sigma process mapping, adapting to different processes and challenges.
Leading the carrying out of capability studiesReal unit · ETC Awards Limited
You'll lead the carrying out of capability studies by defining scope, collecting accurate data, and ensuring reliability. They will interpret results, recommend actions for process improvement, and monitor the effectiveness of implemented changes.
What you'll be able to do
- Lead the carrying out of capability studies, ensuring accurate data collection and analysis.
- Continue to lead the carrying out of capability studies, interpreting the results and recommending appropriate actions.
- Lead the carrying out of capability studies effectively.
- Continue leading the carrying out of capability studies, adapting to different processes and requirements.
Leading the creation of flexible production and manpower systemsReal unit · ETC Awards Limited
You'll gain skills to lead the creation of flexible production and manpower systems. The unit includes assessing current systems, developing and implementing plans to enhance flexibility, and monitoring performance to make necessary adjustments.
What you'll be able to do
- Lead the creation of flexible production and manpower systems.
- Continue to lead the creation of flexible production and manpower systems.
- Lead the creation of flexible production and manpower systems.
- Continue to develop knowledge of how to lead the creation of flexible production and manpower systems.
Leading the creation of standard operating procedures _SOP_Real unit · ETC Awards Limited
This unit covers leading the creation of standard operating procedures (SOPs). You'll define SOP purpose and scope, consult stakeholders, write clear procedures, and ensure compliance with relevant regulations.
What you'll be able to do
- Lead the creation of standard operating procedures (SOP).
- Continue to lead the creation of standard operating procedures (SOP).
- Lead the creation of standard operating procedures (SOP).
- Continue to develop knowledge of how to lead the creation of standard operating procedures (SOP).
Leading the development of visual management systemsReal unit · ETC Awards Limited
You'll develop the ability to lead the development of visual management systems within an organisation. The unit covers planning implementation, delegating tasks, monitoring progress, evaluating effectiveness, and making improvements based on feedback and data analysis.
What you'll be able to do
- Lead the development of visual management systems within an organisation.
- Lead the ongoing development of visual management systems, ensuring continuous improvement.
- Lead the development of visual management systems effectively.
- Lead the development of visual management systems in a way that promotes team engagement and ownership.
Leading the production of a characteristic selection matrixReal unit · ETC Awards Limited
This unit equips learners to lead the production of a characteristic selection matrix. You'll define its purpose and scope, engage stakeholders, facilitate brainstorming, prioritise characteristics, and document rationale to maintain matrix relevance.
What you'll be able to do
- Lead the production of a characteristic selection matrix.
- Continue to lead the production of a characteristic selection matrix.
- Lead the production of a characteristic selection matrix.
- Continue to develop knowledge of how to lead the production of a characteristic selection matrix.
Leading value management _value engineering and value analysis_ activitiesReal unit · ETC Awards Limited
You'll learn to lead value management activities, including planning, organising resources, and facilitating workshops. The unit covers implementing techniques to identify cost savings and value improvements while monitoring progress.
What you'll be able to do
- Lead value management (value engineering and value analysis) activities.
- Continue to lead value management (value engineering and value analysis) activities.
- Lead value management (value engineering and value analysis) activities.
- Continue to develop knowledge of how to lead value management (value engineering and value analysis) activities.
Leading value stream mapping _VSM_ activitiesReal unit · ETC Awards Limited
It teaches you to lead value stream mapping (VSM) activities by planning, facilitating workshops, creating current state maps, and analysing processes to identify waste and inefficiencies. You'll develop strategies to implement improvements effectively.
What you'll be able to do
- Lead value stream mapping (VSM) activities effectively
- Lead value stream mapping (VSM) activities in a sustained manner
- Demonstrate knowledge of how to lead value stream mapping (VSM) activities
- Demonstrate sustained knowledge of how to lead value stream mapping (VSM) activities
Leading workplace organisation activitiesReal unit · ETC Awards Limited
You'll learn to lead workplace organisation activities by planning, allocating resources, and implementing techniques such as 5S. The unit includes monitoring progress and evaluating impacts on productivity.
What you'll be able to do
- Lead workplace organisation activities.
- Continue to lead workplace organisation activities.
- Lead workplace organisation activities.
- Continue to develop knowledge of how to lead workplace organisation activities.
Maintaining and testing process instrumentation and control devicesReal unit · ETC Awards Limited
You'll maintain and test process instrumentation and control devices by following maintenance schedules and workplace procedures. They will use appropriate testing equipment to verify device operation and document maintenance activities accurately.
What you'll be able to do
- Maintain process instrumentation and control devices according to established schedules and procedures
- Test process instrumentation and control devices to verify correct operation
- Describe the maintenance procedures for process instrumentation and control devices
- Explain the testing methods used to verify the correct operation of process instrumentation and control devices
Maintaining electrical equipment/systemsReal unit · ETC Awards Limited
This unit covers the maintenance of electrical equipment and systems, enabling learners to inspect for faults, carry out maintenance tasks safely, and adhere to relevant safety regulations and industry best practices to ensure effective operation.
What you'll be able to do
- Maintain electrical equipment and systems effectively, following established procedures, safety regulations, and industry best practices
- Demonstrate knowledge of the principles of electrical equipment and systems maintenance, including fault diagnosis, repair techniques, and preventative maintenance strategies
Maintaining electronic equipment/systemsReal unit · ETC Awards Limited
You'll learn to maintain electronic equipment and systems by following specified procedures, using appropriate tools and test equipment, identifying and rectifying faults, and accurately recording maintenance activities to ensure operational reliability.
What you'll be able to do
- Maintain electronic equipment and systems according to specified procedures
- Demonstrate knowledge of the methods and procedures used to maintain electronic equipment and systems
Maintaining fluid power equipmentReal unit · ETC Awards Limited
This unit provides learners with skills to maintain fluid power equipment according to manufacturer instructions and safety procedures. You'll identify common faults, perform routine maintenance tasks, and understand fluid power system components and principles.
What you'll be able to do
- Maintain fluid power equipment according to manufacturer's instructions and safety procedures
- Identify common faults and malfunctions in fluid power systems
- Perform routine maintenance tasks on fluid power equipment, such as lubrication and filter replacement
- Understand the principles of fluid power systems
- Recognise the components of a fluid power system and their functions
- Understand the health and safety requirements when maintaining fluid power equipment
Maintaining mechanical devices and equipmentReal unit · ETC Awards Limited
It teaches you to maintain mechanical devices and equipment following manufacturer guidelines and safety precautions. You'll apply lubrication techniques, replace worn components, adjust equipment, and document maintenance activities accurately.
What you'll be able to do
- Maintain mechanical devices and equipment in accordance with manufacturer guidelines
- Apply appropriate maintenance techniques to mechanical devices and equipment
- Know the safety precautions required when maintaining mechanical devices and equipment
- Know the different types of maintenance procedures for mechanical devices and equipment
Make decisions in a business environmentReal unit · ETC Awards Limited
It teaches you to make decisions in a business environment by understanding decision-making purposes and processes. You'll prepare information, apply techniques, and assess decision impacts to support sound judgement.
What you'll be able to do
- Understand the purpose and importance of effective decision-making in a business environment
- Understand how to prepare effectively to make informed and considered decisions
- Understand how to make decisions using appropriate techniques and considering relevant factors
- Understand how to assess the impact and effects of decisions made, both positive and negative
- Prepare comprehensive background information to support the decision-making process
- Make sound and justifiable decisions in a business context
- Assess the contributions of individuals and teams to the decision-making process
Manage a tendering processReal unit · ETC Awards Limited
You'll manage the tendering process, including understanding key stages, legal and ethical considerations, and types of tendering. The unit covers preparing specifications, invitations to tender, and evaluating submissions.
What you'll be able to do
- Understand the different stages and considerations involved in tendering processes
- Draw up a detailed and accurate specification for required products or services, ensuring clarity and completeness
- Write a clear and comprehensive invitation to tender document and communicate it effectively to prospective suppliers
- Understand how to respond fairly, ethically and promptly to pre-tender queries from potential suppliers
- Evaluate received tenders against pre-defined criteria, ensuring objectivity and transparency
- Select a supplier based on the evaluation and provide constructive post-tender feedback to all participating suppliers
Manage budgetsReal unit · ETC Awards Limited
This unit equips learners with knowledge and skills to manage budgets by understanding their purpose, setting and monitoring budgets, allocating resources, and reporting financial performance within an organisational context.
What you'll be able to do
- Understand the purpose of budgets within an organisation.
- Understand the processes involved in managing budgets effectively.
- Understand how to report performance against budgets, identifying variances and potential corrective actions.
- Manage budgets, allocating resources and controlling expenditure.
- Monitor budgets, tracking income and expenditure and identifying potential problems.
Manage physical resourcesReal unit · ETC Awards Limited
This unit provides learners with knowledge and skills to manage physical resources sustainably within an organisation. You'll identify resource requirements, obtain necessary resources, monitor usage, and understand environmental impacts and organisational sustainability policies.
What you'll be able to do
- Understand the importance of sustainability when using physical resources within an organisation
- Identify resource requirements for own area of responsibility, taking into account operational needs
- Obtain required resources for own area of responsibility, following organisational procedures
- Monitor and review the quality and usage of resources in own area of responsibility, identifying areas for improvement
Manage the achievement of customer satisfactionReal unit · ETC Awards Limited
This unit provides learners with the knowledge to manage customer satisfaction by understanding service standards, implementing sustainable processes, supporting colleagues, and fostering a customer-focused culture within their organisation.
What you'll be able to do
- Understand the customer service standards required within own organisation.
- Implement sustainable processes to ensure customer satisfaction.
- Manage and support colleagues in delivering excellent customer service standards.
- Manage and develop a positive culture within own organisation that supports high customer service standards.
- Monitor customer service levels to identify areas for continuous improvement.
Manage the environmental impact of work activitiesReal unit · ETC Awards Limited
You'll understand legal requirements and organisational policies related to environmental protection within their work area. The unit includes assessing and reporting the environmental impact of work activities and identifying methods to minimise adverse effects.
What you'll be able to do
- Understand the legal requirements related to environmental protection that impact on own area of responsibility.
- Understand the environmental policies of the organisation and how they apply to own area of responsibility.
- Assess the potential impact of work activities on the environment, considering various factors such as pollution and resource depletion.
- Identify methods to minimise the environmental impact of work activities, such as using sustainable materials and reducing waste.
- Assess the actual environmental impact of work activities in own area of responsibility, using appropriate measurement techniques.
- Report on the environmental impact of work activities in a clear and concise manner, highlighting any areas of concern.
- Organise work activities to minimise environmental impact, such as scheduling tasks to reduce energy consumption.
- Manage resource use to minimise environmental impact, such as using water and energy efficiently.
- Promote ongoing improvement in environmental performance by identifying opportunities for innovation and best practice.
- Encourage team members to adopt environmentally responsible behaviours in the workplace.
Managing grievance proceduresReal unit · ETC Awards Limited
You'll gain knowledge of how to manage grievance procedures effectively, including preventing grievances through proactive communication, understanding organisational policies, and addressing concerns both informally and through formal procedures in line with guidelines.
What you'll be able to do
- Understand how to prevent potential grievances from arising in the workplace
- Understand an organisation’s grievance policy and procedure and deal with concerns raised by individuals informally, in line with organisational guidelines
- Understand how to follow grievance procedures, ensuring fairness and consistency in the handling of complaints
Monitor Welding Activities in ProductionReal unit · ETC Awards Limited
It teaches you to monitor welding activities within production, ensuring compliance with quality standards and safety regulations. You'll understand monitoring procedures and how to record and report deviations effectively.
What you'll be able to do
- Monitor welding activities in production to ensure adherence to quality standards and safety regulations
- Understand the procedures and protocols for monitoring welding activities in a production environment
Monitor and Evaluate Engineering ProcessesReal unit · ETC Awards Limited
You'll gain knowledge and skills to monitor and evaluate engineering processes by using key performance indicators and appropriate tools. The unit covers assessing process efficiency and effectiveness, identifying improvements, and ensuring processes meet set targets.
What you'll be able to do
- Monitor and evaluate engineering processes to ensure efficiency and effectiveness
- Understand the procedures for monitoring and evaluating engineering processes
Negotiate in a business environmentReal unit · ETC Awards Limited
You'll develop knowledge and skills to prepare for, conduct, and complete negotiations in a business environment. The unit covers identifying objectives, analysing negotiating positions, and ensuring professional and ethical conduct throughout the negotiation process.
What you'll be able to do
- Understand how to prepare effectively for negotiations in a business environment
- Understand how to conduct negotiations professionally and ethically
- Understand how to complete negotiations and document agreements accurately
- Prepare thoroughly for a negotiation, identifying key objectives and potential outcomes
- Conduct negotiations effectively, using appropriate communication and influencing skills
- Complete negotiations successfully, reaching mutually beneficial agreements and documenting them appropriately
Obtain Resources for the Implementation of Engineering ActivitiesReal unit · ETC Awards Limited
This unit equips learners with the knowledge to identify and obtain necessary materials, equipment, and personnel for engineering activities. You'll understand processes for acquiring resources timely and ensuring they meet required specifications and standards.
What you'll be able to do
- Obtain the necessary resources, including materials, equipment, and personnel, for the successful implementation of engineering activities
- Understand the processes and procedures involved in obtaining resources effectively and efficiently for engineering projects
Plan Welding Production Resources and ActivitiesReal unit · ETC Awards Limited
You'll gain the ability to plan welding production resources and activities effectively. The unit covers planning based on material availability, equipment capacity, and workforce skills, alongside understanding principles of resource allocation in welding production.
What you'll be able to do
- Plan welding production resources and activities, taking into account factors such as material availability, equipment capacity, and workforce skills.
- Understand the principles and processes involved in planning welding production resources and activities, including resource allocation, scheduling, and risk management.
Plan and Decommission Engineering Equipment, Processes or FacilitiesReal unit · ETC Awards Limited
You'll gain the skills to plan and safely decommission engineering equipment, processes, or facilities. The unit covers developing detailed plans, implementing procedures efficiently, and considering environmental, health, and safety factors throughout the decommissioning process.
What you'll be able to do
- Plan and decommission engineering equipment, processes or facilities safely and efficiently
- Understand the key considerations when planning and decommissioning engineering equipment, processes or facilities
- Understand the relevant health, safety and environmental regulations related to decommissioning activities
Plan and control new product design benchmarking activitiesReal unit · ETC Awards Limited
You'll plan and control new product design benchmarking activities by developing plans, managing execution, analysing data, and reporting findings. The unit covers methodologies to identify best practices and areas for design improvement.
What you'll be able to do
- Plan and control new product design benchmarking activities to identify best practices and areas for improvement
- Understand the methodologies and strategies for effectively planning and controlling new product design benchmarking activities
Plan and control new product manufacturing process benchmarking activitiesReal unit · ETC Awards Limited
You'll plan and control new product manufacturing process benchmarking activities. They will define scope and objectives, develop plans with timelines and resources, identify key performance indicators, and monitor benchmarking progress.
What you'll be able to do
- Plan new product manufacturing process benchmarking activities in line with organisational objectives
- Control new product manufacturing process benchmarking activities to ensure they are completed effectively and efficiently
- Understand the principles and techniques of new product manufacturing process benchmarking
- Understand how to analyse and interpret data from new product manufacturing process benchmarking activities
- Understand how to use the results of benchmarking to improve manufacturing processes
Plan and manage the installation of the new product manufacturing processReal unit · ETC Awards Limited
It teaches you to plan and manage the installation of new product manufacturing processes, including resource allocation and progress monitoring. You'll understand key considerations for effective installation management.
What you'll be able to do
- Plan and manage the installation of a new product manufacturing process effectively
- Understand the key considerations when planning and managing the installation of a new product manufacturing process, including resource allocation and risk management
Plan, allocate and monitor work in own area of responsibilityReal unit · ETC Awards Limited
You'll develop the ability to plan, allocate, and monitor work within their area of responsibility. The unit covers producing work plans, assigning tasks, monitoring progress and quality, and reviewing plans to ensure objectives are met.
What you'll be able to do
- Produce a comprehensive work plan for own area of responsibility, taking into account relevant factors and constraints.
- Allocate responsibilities to team members, ensuring clarity and agreement on expectations.
- Monitor the progress of work in own area of responsibility, identifying any deviations from the plan.
- Monitor the quality of work in own area of responsibility, ensuring it meets the required standards.
- Provide constructive feedback to team members on their performance and progress.
- Review existing work plans for own area of responsibility to identify areas for improvement.
- Amend work plans for own area of responsibility based on reviews and changing circumstances.
- Communicate changes to work plans effectively to all relevant team members.
Prepare for and support quality auditsReal unit · ETC Awards Limited
This unit equips learners to prepare for and support quality audits within their area of responsibility. You'll understand applicable quality standards and procedures, monitor work against these standards, and communicate audit findings effectively.
What you'll be able to do
- Understand the quality standards and procedures that apply to own area of responsibility within an engineering context
- Monitor work in own area of responsibility against established quality standards and procedures
- Prepare for a quality audit in own area of responsibility, ensuring all necessary documentation is readily available
- Discuss quality audit findings with the auditor, providing clarification and addressing any concerns raised
- Complete agreed actions following a quality audit to address any identified non-conformances and improve quality processes
Prepare specifications for contractsReal unit · ETC Awards Limited
You'll prepare specifications for work contracts in engineering projects. The unit includes understanding contract elements, legal implications, contractor selection preparation, and defining project scope.
What you'll be able to do
- Understand the key elements and legal implications of work contracts relevant to engineering projects.
- Understand how to prepare for the selection of contractors and suppliers, including defining project scope and evaluation criteria.
- Prepare specifications for work contracts, ensuring they are clear, concise and meet the required standards.
- Agree selection criteria for contractors and suppliers, ensuring they are fair, objective and aligned with project goals.
Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and TransportationReal unit · ETC Awards Limited
You'll prepare and manoeuvre Armoured Fighting Vehicles (AFVs) for maintenance and transportation. The unit covers identifying maintenance requirements, following safety protocols, isolating systems, and understanding transportation considerations.
What you'll be able to do
- Prepare Armoured Fighting Vehicles (AFVs) for maintenance, ensuring all safety protocols are followed
- Manoeuvre Armoured Fighting Vehicles (AFVs) for transportation, adhering to transportation regulations
- Know the procedures for preparing Armoured Fighting Vehicles (AFVs) for maintenance
- Know the procedures for manoeuvring Armoured Fighting Vehicles (AFVs) for transportation
Preparing and proving CNC fabrication machine tool programsReal unit · ETC Awards Limited
You'll prepare and prove CNC fabrication machine tool programmes based on engineering drawings. The unit includes selecting cutting tools, generating programmes using CAD/CAM or manual methods, simulating programmes to identify errors, and monitoring production.
What you'll be able to do
- Prepare CNC fabrication machine tool programs based on engineering drawings
- Prove CNC fabrication machine tool programs to ensure accuracy and efficiency
- Know the principles of CNC programming for fabrication machine tools
- Verify CNC programs to avoid errors and potential damage
Preparing and proving CNC machine tool programsReal unit · ETC Awards Limited
This unit covers the preparation and proving of CNC machine tool programs. You'll develop programs from engineering drawings, select tools and parametres, simulate and run programs, and make adjustments to ensure accuracy.
What you'll be able to do
- Prepare CNC machine tool programs according to specified requirements
- Prove CNC machine tool programs to ensure correct operation and safety
- Understand the principles of preparing CNC machine tool programs
- Understand the procedures for proving CNC machine tool programs
Preparing and using CNC fabrication machineryReal unit · ETC Awards Limited
It teaches you to prepare and use CNC fabrication machinery, including loading programs, setting parametres, and verifying machine calibration. You'll understand the importance of proper preparation for accurate and efficient component fabrication.
What you'll be able to do
- Prepare CNC fabrication machinery for operation, including loading programs and setting parameters
- Use CNC fabrication machinery to produce components according to specified designs
- Interpret CNC programs and identify potential errors
- Maintain CNC fabrication machinery and troubleshoot common problems
Preparing and using CNC machining centresReal unit · ETC Awards Limited
You'll prepare and use CNC machining centres for manufacturing operations. The unit includes understanding CNC principles, safety, programming basics, and producing components to specified dimensions and tolerances.
What you'll be able to do
- Prepare and use CNC machining centres for manufacturing operations, following established procedures
- Know the principles of preparing and using CNC machining centres, including safety precautions and programming basics
Preparing and using CNC milling machinesReal unit · ETC Awards Limited
This unit equips learners to prepare and operate CNC milling machines safely and effectively. You'll follow manufacturer instructions, adhere to safety guidelines, and produce components to required specifications using CNC milling technology.
What you'll be able to do
- Prepare CNC milling machines in accordance with manufacturer's instructions and safety guidelines
- Use CNC milling machines to produce components to the required specification
- Know the procedures for preparing CNC milling machines for operation
- Know the safety precautions required when using CNC milling machines
Preparing and using CNC turning machinesReal unit · ETC Awards Limited
It teaches you to prepare and use CNC turning machines safely and effectively. You'll follow manufacturer instructions and safety guidelines to prepare machines and produce components to specified standards.
What you'll be able to do
- Prepare CNC turning machines for operation, following manufacturer's instructions and safety guidelines
- Use CNC turning machines to produce components to specified dimensions and tolerances
- Understand the procedures for preparing CNC turning machines for use
- Understand the correct techniques for using CNC turning machines safely and effectively
Preparing and using industrial robotsReal unit · ETC Awards Limited
This unit equips learners to prepare and use industrial robots safely and effectively. You'll understand robot operation principles, follow manufacturer instructions, perform specified tasks, monitor performance, and carry out necessary adjustments.
What you'll be able to do
- Prepare industrial robots for operation, following safety procedures and manufacturer's instructions
- Use industrial robots to perform specified tasks, monitoring their performance and making adjustments as necessary
- Understand the principles of operation of industrial robots, including their components, programming, and safety features
Preparing and using lathes for turning operationsReal unit · ETC Awards Limited
This unit covers the preparation and use of lathes for turning operations. You'll follow manufacturer instructions and workplace procedures to set up lathes safely and perform specified turning operations to required standards.
What you'll be able to do
- Prepare lathes for turning operations in accordance with manufacturer's instructions and workplace procedures
- Use lathes to perform turning operations safely and effectively
- Describe the procedures for preparing lathes for turning operations
- Explain the safe and effective use of lathes for turning operations
Preparing and using manual TIG or plasma-arc welding equipmentReal unit · ETC Awards Limited
It teaches you to prepare and use manual TIG or plasma-arc welding equipment safely. You'll follow preparation steps, use appropriate personal protective equipment, apply safety procedures, and perform welding tasks to required standards.
What you'll be able to do
- Prepare manual TIG or plasma-arc welding equipment for use, following safety procedures
- Use manual TIG or plasma-arc welding equipment to perform welding tasks to the required standard
- Know the correct procedures for preparing manual TIG or plasma-arc welding equipment
- Know the safety requirements for using manual TIG or plasma-arc welding equipment
Preparing and using manual flame brazing and braze welding equipmentReal unit · ETC Awards Limited
This unit provides learners with practical skills to prepare and use manual flame brazing and braze welding equipment, including equipment setup, flame control, joint preparation, and inspection to produce sound and aesthetically acceptable joints.
What you'll be able to do
- Prepare and use manual flame brazing and braze welding equipment to join metal components, following established safety procedures and techniques
- Demonstrate knowledge of the principles and practices involved in preparing and using manual flame brazing and braze welding equipment, including equipment setup, flame control, and joint preparation
Preparing and using manual metal arc welding equipmentReal unit · ETC Awards Limited
You'll develop the skills to prepare and use manual metal arc welding equipment safely and effectively, following manufacturer instructions. The unit includes producing welds to required standards and understanding safety procedures and equipment maintenance.
What you'll be able to do
- Prepare and use manual metal arc welding equipment according to industry standards
- Understand how to prepare and use manual metal arc welding equipment, including safety procedures and equipment maintenance
Preparing and using manual oxy/fuel gas welding equipmentReal unit · ETC Awards Limited
This unit provides learners with the ability to prepare and use manual oxy/fuel gas welding equipment safely and effectively. You'll understand welding principles, equipment components, and produce welds meeting required standards.
What you'll be able to do
- Prepare and use manual oxy/fuel gas welding equipment safely and effectively, following established procedures and safety regulations
- Demonstrate knowledge of the principles of oxy/fuel gas welding, the components of the equipment, and the procedures for setting up and using it correctly
Preparing and using milling machinesReal unit · ETC Awards Limited
This unit provides learners with the knowledge and skills to prepare and use milling machines safely and effectively. You'll follow manufacturer instructions and workplace procedures to set up machines and perform specified milling operations to required standards.
What you'll be able to do
- Prepare milling machines in accordance with manufacturer's instructions and workplace procedures
- Use milling machines to perform specified operations safely and effectively
- Describe the procedures for preparing milling machines for use
- Explain the safe and effective use of milling machines for specified operations
Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipmentReal unit · ETC Awards Limited
You'll prepare and use semi-automatic MIG, MAG, and flux cored arc welding equipment by setting parametres, performing welding tasks, maintaining equipment, and adhering to safety procedures to achieve specified quality standards.
What you'll be able to do
- Prepare semi-automatic MIG, MAG and flux cored arc welding equipment for use
- Use semi-automatic MIG, MAG and flux cored arc welding equipment to perform welding tasks
- Describe the preparation procedures for semi-automatic MIG, MAG and flux cored arc welding equipment
- Explain the operating principles of semi-automatic MIG, MAG and flux cored arc welding equipment
Produce Engineering SpecificationsReal unit · ETC Awards Limited
You'll produce engineering specifications by defining purpose and scope, identifying relevant standards, and developing clear documents. The unit emphasises inclusion of technical information and specification review.
What you'll be able to do
- Produce engineering specifications.
- Understand how to produce engineering specifications.
Produce and evaluate conceptual design options for new productsReal unit · ETC Awards Limited
You'll produce and evaluate conceptual design options for new products, considering functionality, cost, and manufacturability. The unit covers idea generation, documentation, and evaluation against specified criteria.
What you'll be able to do
- Produce conceptual design options for new products, considering various factors such as functionality, cost, and manufacturability
- Evaluate conceptual design options for new products, assessing their strengths and weaknesses against specified criteria
- Understand the processes involved in producing and evaluating conceptual design options for new products, including idea generation, prototyping, and testing
Produce new product designs for manufacture and assemblyReal unit · ETC Awards Limited
This unit covers the production of new product designs suitable for manufacture and assembly. You'll learn to produce designs that meet specified requirements, optimise designs for production processes, and ensure suitability for both manufacture and assembly.
What you'll be able to do
- Produce new product designs for manufacture and assembly, ensuring they meet specified requirements and are optimised for production processes.
- Understand the considerations and techniques involved in producing new product designs for manufacture and assembly, including design for manufacturability (DFM) and design for assembly (DFA).
Producing CAD models/drawings using a CAD systemReal unit · ETC Awards Limited
You'll learn to produce accurate CAD models and drawings according to specified design requirements and industry standards. The unit covers CAD system functionalities, modelling techniques, and drawing conventions to ensure detailed and precise outputs.
What you'll be able to do
- Produce CAD models and drawings using a CAD system, adhering to specified design requirements and industry standards
- Demonstrate knowledge of CAD system functionalities, modelling techniques, and drawing conventions for creating accurate and detailed CAD models and drawings
Producing Composite Mouldings using Resin Film Infusion TechniquesReal unit · ETC Awards Limited
You'll develop the ability to produce composite mouldings using resin film infusion techniques, including preparing moulds, applying resin film, infusing resin, curing, and demoulding. The unit covers materials, infusion methods, and quality standards to meet specified requirements.
What you'll be able to do
- Produce composite mouldings using resin film infusion techniques to meet specified requirements
- Demonstrate knowledge of the resin film infusion techniques used in the production of composite mouldings
Producing Composite Mouldings using Resin Flow Infusion TechniquesReal unit · ETC Awards Limited
This unit covers the production of composite mouldings using resin flow infusion techniques. You'll prepare moulds, mix resin accurately, perform resin flow infusion, and inspect mouldings for defects and structural integrity, while understanding the underlying principles of the process.
What you'll be able to do
- Produce composite mouldings using resin flow infusion techniques, ensuring correct resin ratios and achieving the required structural integrity.
- Produce composite mouldings using resin flow infusion techniques, understanding the principles of resin flow infusion and the properties of composite materials.
Producing aircraft detail assembliesReal unit · ETC Awards Limited
This unit covers the production of aircraft detail assemblies, including interpreting drawings, fabricating components, assembling to specified tolerances, and inspecting for quality. You'll gain practical skills to ensure assemblies meet aviation standards.
What you'll be able to do
- Produce aircraft detail assemblies according to specified drawings, tolerances, and quality standards
- Demonstrate knowledge of the processes involved in producing aircraft detail assemblies, including material selection, fabrication techniques, and inspection procedures
Producing and preparing molten materials for castingReal unit · ETC Awards Limited
It teaches you to produce and prepare molten materials for casting, ensuring correct temperature and viscosity according to specifications. You'll understand material properties, casting processes, and safety procedures when handling molten materials.
What you'll be able to do
- Produce and prepare molten materials for casting, ensuring quality and safety
- Understand how to produce and prepare molten materials for casting, including material properties and casting processes
Producing and preparing sand moulds and cores for castingReal unit · ETC Awards Limited
You'll produce and prepare sand moulds and cores for casting, meeting specified dimensions and tolerances. The unit covers safe handling of materials, preparation of sand mixtures, and achieving required surface finishes in mould and core production.
What you'll be able to do
- Produce and prepare sand moulds for casting to meet specified requirements
- Produce and prepare sand cores for casting to meet specified requirements
- Describe the processes involved in producing and preparing sand moulds for casting
- Explain the processes involved in producing and preparing sand cores for casting
Producing cast components by manual meansReal unit · ETC Awards Limited
It teaches you to produce cast components manually, focusing on mould preparation, material selection, and adherence to quality standards and tolerances. You'll understand manual casting techniques and their importance.
What you'll be able to do
- Produce cast components by manual means, adhering to specified quality standards and tolerances
- Know the techniques and processes involved in producing cast components by manual means, including material selection and mould preparation
Producing components by rapid prototyping techniquesReal unit · ETC Awards Limited
You'll produce components using rapid prototyping techniques while adhering to safety guidelines and established procedures. The unit covers principles, operation, applications of rapid prototyping, and evaluation of produced components against specified requirements.
What you'll be able to do
- Produce components using rapid prototyping techniques, following established procedures and safety guidelines
- Understand the principles and operation of rapid prototyping techniques
- Recognise the different types of rapid prototyping techniques and their applications
- Identify the materials suitable for use in rapid prototyping techniques
- Understand the health and safety requirements when using rapid prototyping equipment
Producing components using hand fitting techniquesReal unit · ETC Awards Limited
You'll produce components using hand fitting techniques to specified tolerances. The unit includes accurate marking out, material removal using hand tools, dimensional checking, and understanding safety and procedural principles.
What you'll be able to do
- Produce components using hand fitting techniques to meet specified tolerances
- Produce components using hand fitting techniques effectively
- Understand the principles of hand fitting techniques
- Understand the tools and equipment used in hand fitting techniques
Producing composite assembliesReal unit · ETC Awards Limited
You'll develop the skills to produce composite assemblies that meet specified dimensions, tolerances, strength, and stiffness requirements. The unit includes understanding material preparation, bonding techniques, and inspection for defects and imperfections.
What you'll be able to do
- Produce composite assemblies according to specified designs and quality standards
- Describe the processes involved in producing composite assemblies
- Explain the properties and applications of different composite materials
Producing composite mouldings using pre-preg techniquesReal unit · ETC Awards Limited
You'll produce composite mouldings using pre-preg laminating techniques. The unit covers mould preparation, application of pre-preg materials with correct fibre orientation, curing processes, and safe removal of composite mouldings.
What you'll be able to do
- Produce composite mouldings using pre-preg laminating techniques according to specified procedures
- Produce composite mouldings using pre-preg laminating techniques safely and effectively
- Understand the properties of pre-preg materials
- Understand the procedures for producing composite mouldings using pre-preg laminating techniques
Producing composite mouldings using wet lay-up techniquesReal unit · ETC Awards Limited
You'll produce composite mouldings using wet lay-up techniques. They will understand composite material properties, apply correct resin-to-fibre ratios, and ensure mouldings meet specified dimensions and tolerances.
What you'll be able to do
- Produce composite mouldings using wet lay-up techniques to meet specified requirements
- Understand the procedures for producing composite mouldings using wet lay-up techniques
- Know the properties and characteristics of different composite materials used in wet lay-up
Producing electrical or electronic engineering drawings using a CAD systemReal unit · ETC Awards Limited
You'll learn to produce electrical or electronic engineering drawings using a CAD system, adhering to specified requirements and standards. The unit includes understanding drawing conventions and verification processes to ensure accuracy and compliance.
What you'll be able to do
- Produce electrical or electronic engineering drawings using a CAD system to meet specified requirements
- Understand the procedures for producing electrical or electronic engineering drawings using a CAD system
- Know the conventions and standards used in electrical and electronic engineering drawings
Producing engineering project plansReal unit · ETC Awards Limited
It teaches you to produce comprehensive engineering project plans. You'll define project objectives, identify necessary resources, develop timelines with key milestones, and understand the importance of project scope and risk management.
What you'll be able to do
- Produce engineering project plans that include objectives, resources, and timelines
- Develop engineering project plans that meet specified requirements
Producing mechanical assembliesReal unit · ETC Awards Limited
You'll develop the ability to produce mechanical assemblies according to engineering drawings and specifications. The unit covers the use of appropriate tools and equipment, as well as checking assembled components for accuracy and functionality.
What you'll be able to do
- Produce mechanical assemblies according to engineering drawings and specifications
- Use appropriate tools and equipment to assemble mechanical components
- Check the assembled components for accuracy and functionality
- Understand the principles of mechanical assembly
- Recognise different types of mechanical components and their functions
- Understand the health and safety requirements when producing mechanical assemblies
Producing mechanical engineering drawings using a CAD systemReal unit · ETC Awards Limited
You'll develop the ability to produce mechanical engineering drawings using a CAD system, applying specified dimensions and geometric tolerances. The unit includes understanding CAD setup, drawing creation, and verification against relevant industry standards.
What you'll be able to do
- Produce mechanical engineering drawings using a CAD system to specified standards and tolerances
- Understand the procedures for producing mechanical engineering drawings using a CAD system, including setting up the system, creating drawings, and saving and printing drawings
Producing platework components and assembliesReal unit · ETC Awards Limited
This unit provides learners with skills to produce platework components and assemblies to specified dimensions and tolerances. You'll interpret engineering drawings, select suitable materials and techniques, and inspect finished components for quality.
What you'll be able to do
- Produce platework components and assemblies to specified dimensions and tolerances
- Interpret engineering drawings and specifications for platework components and assemblies
- Select appropriate materials and cutting techniques for platework fabrication
- Assemble platework components using appropriate joining methods, such as welding or bolting
Producing sheet metal components and assembliesReal unit · ETC Awards Limited
It teaches you to produce sheet metal components and assemblies by interpreting engineering drawings, selecting appropriate tools, applying safe working practices, and understanding material properties to meet specified tolerances and quality standards.
What you'll be able to do
- Produce sheet metal components and assemblies to the required specification
- Demonstrate knowledge of the processes involved in producing sheet metal components and assemblies
Propose Decommissioning of Engineering Equipment, Processes or FacilitiesReal unit · ETC Awards Limited
This unit equips learners to propose decommissioning of engineering equipment, processes, or facilities by justifying the need, outlining processes, and identifying risks with mitigation strategies. You'll understand key stages and resource requirements for decommissioning.
What you'll be able to do
- Propose decommissioning of engineering equipment
- Propose decommissioning of engineering processes
- Propose decommissioning of engineering facilities
- Understand how to propose decommissioning of engineering equipment
- Understand how to propose decommissioning of engineering processes
- Understand how to propose decommissioning of engineering facilities
Propose and Specify Engineering ResearchReal unit · ETC Awards Limited
You'll develop the ability to propose and specify engineering research projects. The unit covers identifying research topics, formulating questions or hypotheses, outlining methodologies, defining scope and objectives, and specifying resources and plans.
What you'll be able to do
- Propose engineering research
- Specify engineering research
- Understand how to propose engineering research
- Understand how to specify engineering research
Provide Technical Advice and Guidance on Engineering or Manufacturing RequirementsReal unit · ETC Awards Limited
You'll provide technical advice and guidance on engineering or manufacturing requirements, adhering to relevant standards and regulations. They will communicate effectively and understand the processes involved in delivering technical support.
What you'll be able to do
- Provide technical advice and guidance on engineering or manufacturing requirements, adhering to relevant standards and regulations
- Understand the processes involved in providing effective technical advice and guidance on engineering or manufacturing requirements
Provide leadership and direction for own area of responsibilityReal unit · ETC Awards Limited
This unit develops learners' ability to lead within their area of responsibility by providing direction, setting SMART objectives, communicating effectively with stakeholders, and using feedback to assess and improve their leadership performance.
What you'll be able to do
- Lead individuals and teams in own area of responsibility
- Provide clear direction and set achievable objectives in own area of responsibility
- Communicate the direction for own area of responsibility effectively to relevant stakeholders
- Collect feedback to inform improvement in own area of responsibility
- Assess own leadership performance against agreed objectives and standards
Review risk management processes in own area of responsibilityReal unit · ETC Awards Limited
It teaches you to monitor and evaluate risk management processes within their area of responsibility. You'll identify improvements, implement control measures, and develop strategies to enhance risk management effectiveness.
What you'll be able to do
- Monitor and evaluate risk management processes within own area of responsibility to identify areas for improvement
- Improve the risk management process by implementing appropriate control measures and strategies
Schedule Engineering ActivitiesReal unit · ETC Awards Limited
It teaches you to schedule engineering activities by developing schedules aligned with industry standards and organisational requirements, allocating resources, managing timelines, and understanding the impact of resource availability on scheduling.
What you'll be able to do
- Schedule activities for engineering methods and procedures in accordance with industry standards and organisational requirements.
- Understand the processes involved in scheduling activities for engineering methods and procedures, including resource allocation and time management.
Solve Welding Problems in ProductionReal unit · ETC Awards Limited
It teaches you to identify and solve welding problems commonly encountered in production environments by analysing causes, implementing effective solutions, and evaluating their effectiveness using appropriate problem-solving and diagnostic methods.
What you'll be able to do
- Solve welding problems effectively in a production environment
- Understand the methods and techniques used to solve welding problems in production
Solve engineering or manufacturing problemsReal unit · ETC Awards Limited
You'll solve engineering or manufacturing problems by applying recognised problem-solving methodologies. They will identify root causes, implement solutions, and evaluate their effectiveness within a systematic approach.
What you'll be able to do
- Solve engineering or manufacturing problems by applying appropriate problem-solving methodologies and techniques
- Understand the systematic approach to solving engineering or manufacturing problems, including identifying root causes and implementing effective solutions
Specify Methods and Procedures to Achieve Engineering RequirementsReal unit · ETC Awards Limited
You'll specify methods and procedures to achieve engineering requirements for specific tasks or projects. They will identify requirements, select and justify appropriate methods, and develop detailed, documented procedures for implementation.
What you'll be able to do
- Specify appropriate methods to achieve engineering requirements
- Specify appropriate procedures to achieve engineering requirements
- Understand how to specify methods and procedures to achieve engineering requirements
Specify Risk Reduction Methods and ProceduresReal unit · ETC Awards Limited
It teaches you to specify appropriate risk reduction methods and procedures for identified hazards, including justifying selections and documenting processes clearly. You'll understand relevant legislation, guidance, and stakeholder consultation involved in risk management.
What you'll be able to do
- Specify appropriate risk reduction methods and procedures for identified hazards
- Understand the processes involved in specifying risk reduction methods and procedures
- Understand the relevant legislation and guidance related to risk reduction methods and procedures
Stripping and rebuilding motorsport engines pre-competitionReal unit · ETC Awards Limited
This unit equips learners with skills to strip and rebuild motorsport engines pre-competition. You'll follow established procedures, identify and record component conditions, and rebuild engines to meet pre-competition specifications.
What you'll be able to do
- Strip motorsport engines in preparation for rebuilding, following established procedures
- Rebuild motorsport engines to meet pre-competition specifications
- Understand the processes involved in stripping motorsport engines
- Understand the processes involved in rebuilding motorsport engines for pre-competition use
Stripping and rebuilding motorsport vehicles pre-competitionReal unit · ETC Awards Limited
It teaches you to strip and rebuild motorsport vehicles pre-competition by dismantling components, inspecting for wear and damage, reassembling according to specifications and regulations, and applying appropriate techniques safely.
What you'll be able to do
- Strip and rebuild motorsport vehicles in preparation for competition, following established procedures and safety guidelines
- Demonstrate knowledge of the processes involved in stripping and rebuilding motorsport vehicles pre-competition, including component identification, inspection, and reassembly techniques
Support individuals to develop and take responsibility for their performanceReal unit · ETC Awards Limited
This unit equips learners to support individuals in developing and taking responsibility for their performance. You'll agree development needs, assist in creating and implementing plans, and evaluate progress effectively.
What you'll be able to do
- Agree performance development needs with an individual, ensuring mutual understanding and commitment.
- Understand how to help an individual create a development plan that is realistic, achievable and aligned with their goals and organisational objectives.
- Support an individual in implementing their development plan, providing guidance, resources and encouragement as needed.
- Evaluate an individual’s progress against their development plan, providing constructive feedback to facilitate continual performance improvement.
Support learning and development within own area of responsibilityReal unit · ETC Awards Limited
You'll learn to identify colleagues' learning needs within their area of responsibility, create a supportive learning environment, assist in applying learning, and evaluate outcomes to inform future development plans.
What you'll be able to do
- Identify the learning needs of colleagues within own area of responsibility.
- Understand how to develop a supportive learning environment within own area of responsibility.
- Support colleagues in their learning and the practical application of that learning.
- Evaluate learning outcomes and plan for future learning and development of colleagues.
Support the management of redundancies in own area of responsibilityReal unit · ETC Awards Limited
This unit provides learners with knowledge and skills to support redundancy management within their area of responsibility. You'll understand legal and ethical requirements, communicate redundancy information sensitively, and support affected individuals appropriately.
What you'll be able to do
- Understand how to follow redundancy policy within own area of responsibility, ensuring compliance with legal and ethical requirements.
- Communicate information on redundancies to those affected in a clear, sensitive, and timely manner.
- Understand how to support those affected by redundancies, providing access to relevant resources and guidance.
Transfer Control of Engineering Products, Processes or FacilitiesReal unit · ETC Awards Limited
This unit develops learners' ability to transfer control of engineering products, processes, or facilities. You'll prepare for transfer, execute handover procedures, and confirm successful transfer while understanding required documentation and communication protocols.
What you'll be able to do
- Transfer control of engineering products, processes or facilities in a safe and efficient manner.
- Understand the procedures and documentation required to transfer control of engineering products, processes or facilities.
- Understand the importance of clear communication and handover during the transfer of control.
Undertake Engineering ResearchReal unit · ETC Awards Limited
You'll undertake engineering research by selecting methodologies, applying techniques, analysing data, and presenting findings. The unit covers principles and processes essential for conducting effective and ethical engineering research.
What you'll be able to do
- Undertake engineering research using appropriate methodologies and techniques
- Understand the principles and processes involved in undertaking effective engineering research
Undertake Project Management ActivitiesReal unit · ETC Awards Limited
You'll undertake project management activities by applying tools and techniques to plan, execute, and monitor projects, communicate with stakeholders, identify risks, and understand project management principles including control and evaluation.
What you'll be able to do
- Undertake project management activities, applying relevant tools and techniques.
- Understand the principles and processes involved in undertaking project management activities.
Using computer software packages to assist with engineering activitiesReal unit · ETC Awards Limited
You'll use computer software packages to assist with engineering activities such as creating drawings, performing calculations, and managing data. The unit includes understanding applications of CAD and other engineering software tools.
What you'll be able to do
- Use computer software packages to assist with engineering activities effectively
- Describe the applications of computer software packages used in engineering
- Explain the procedures for using computer software packages to assist with engineering activities
Using wood for pattern, modelmaking and other engineering applicationsReal unit · ETC Awards Limited
It teaches you to use wood safely and effectively for pattern making, modelmaking, and other engineering applications. You'll follow established procedures and understand wood properties and selection criteria to produce accurate engineering patterns and models.
What you'll be able to do
- Use wood effectively for pattern making, modelmaking and other engineering applications, following established procedures and safety guidelines
- Demonstrate knowledge of the properties, selection criteria, and appropriate applications of different types of wood used in pattern making, modelmaking and other engineering applications
Verify new product designs using a computer modelReal unit · ETC Awards Limited
You'll be equipped to verify new product designs using computer models, applying modelling techniques to assess design compliance with specified requirements. The unit includes analysing verification results and documenting the process clearly.
What you'll be able to do
- Verify new product designs using a computer model in accordance with specified requirements
- Understand the principles and techniques used to verify new product designs using a computer model
Verify new product designs using a physical modelReal unit · ETC Awards Limited
You'll develop the ability to verify new product designs using physical models. The unit covers constructing models, conducting performance tests, comparing results against design specifications, and understanding the role of physical models in design verification.
What you'll be able to do
- Verify new product designs using a physical model, comparing the model's performance against design specifications
- Understand the process of creating and using physical models to verify new product designs, including identifying potential design flaws and areas for improvement
Wiring and testing electrical equipment and circuitsReal unit · ETC Awards Limited
You'll gain the skills to wire and test electrical equipment and circuits in compliance with regulations, diagnose faults, and document processes. The unit covers wiring techniques, testing methods, and safety considerations.
What you'll be able to do
- Wire and test electrical equipment and circuits, ensuring compliance with relevant regulations and safety standards
- Demonstrate knowledge of the principles and practices involved in wiring and testing electrical equipment and circuits, including circuit design, wiring techniques, and testing methods
Wiring and testing programmable controller based systemsReal unit · ETC Awards Limited
You'll wire and test programmable controller based systems according to specified requirements. They will connect power and input/output devices, inspect wiring, test system operation, and understand relevant wiring standards.
What you'll be able to do
- Wire programmable controller based systems according to specified requirements
- Test wired programmable controller based systems to ensure correct operation
- Understand the procedures for wiring programmable controller based systems
- Understand the testing procedures for programmable controller based systems
The honest bit
You’ve started things before
Most courses were built for a room full of people who aren’t you. A cohort moves on whether or not your week allowed it, and by the third week the thing you’re behind on becomes the reason you stop opening it.
There’s no cohort here, and no timetable to fall behind. Before anything starts, Zavmo asks when you’re sharpest and how long you can realistically sit down for, then builds the sessions around those answers. A bad fortnight changes your pace. It doesn’t put you behind.
And you only pay once you start learning. Searching and planning are free, and you can cancel any time — so the cost of finding out is an afternoon, not a year.
Your passport
Every credit is a stamp you keep
Level 4 credits are regulated. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you’ve earned and what’s next.
Address performance problems affecting team membersAgree a budgetAnalyse the market in which your organisation operatesApplying quality function deployment _QFD_Assembling Structural Sub Assemblies to Produce a Public Service VehicleAssembling and testing electronic circuitsAssembling and testing fluid power systemsAssembling pattern, model and engineering woodwork components
Each stamp is a real unit registered against this qualification.
Who’d teach you this
The Evidence Evaluator
Assessor
Helps you show what you can actually do, gathering the evidence that proves it as you learn.
Meet all twelve tutorsWhere this connects
Where these credits take you
A qualification is never a dead end here. See the jobs its credits open, the national occupational standards its units map to, and the future skills they quietly build.
ETCAL Level 4 NVQ Extended Diploma in Engineering Manufacture
- 03_Authorise specifications for engineering products or processes
- 04_Review and Authorise a Strategy for Engineering Design
- 05_Review and Authorise Designs for Engineering Products or Processes
- 07_Ensure the evaluation of results of engineering research
- 11_Authorise the transfer of control of engineering facilities
- 12_Solve engineering problems in a biomanufacturing environment
- Assembling and Testing Fluid Power Systems Legacy
- Assist in Determining the Requirements for Engineering Activities
Where this can lead
Six Sigma Black Belt
Your journey as a Six Sigma Black Belt here at Zavmo is just the beginning. We're committed to providing you with the challenges, development, and support to build a truly impactful and rewarding career, whether you aim for the C-suite or prefer to remain a deep technical expert. The opportunities are pretty vast, honestly.
See the whole journey →Opens the roleSix Sigma Black BeltOne of the jobs this qualification is a route intoSee the role →Opens the roleLead Quality Engineer / Six Sigma Black BeltOne of the jobs this qualification is a route intoSee the role →Opens the roleContinuous Improvement EngineerOne of the jobs this qualification is a route intoSee the role →Opens the roleSenior Lean Operations and Six Sigma EngineerOne of the jobs this qualification is a route intoSee the role →Opens the roleLead Process Excellence EngineerOne of the jobs this qualification is a route intoSee the role →Opens the roleLead Continuous Improvement EngineerOne of the jobs this qualification is a route intoSee the role →Future FluencyAll ten future skillsSee how every unit is contextualised by the tenExplore →
Showing 6 roles, drawn from 151 job records mapped to this qualification.
Skills it covers
What the job actually needs. These are the standards the units are built against, in the words employers and awarding bodies already use for the work itself.
03_Authorise specifications for engineering products or processes04_Review and Authorise a Strategy for Engineering Design05_Review and Authorise Designs for Engineering Products or Processes07_Ensure the evaluation of results of engineering research11_Authorise the transfer of control of engineering facilities12_Solve engineering problems in a biomanufacturing environmentAssembling and Testing Fluid Power Systems LegacyAssist in Determining the Requirements for Engineering ActivitiesAssist in Identifying Engineering Design Requirements of ClientsAssist in Producing Engineering SpecificationsAssist in configuring engineering products, processes or facilitiesAssist in developing a research methodology for engineeringAssist in developing a strategy for the engineering design processAssist in establishing an engineering design briefAssist in evaluating the results of engineering researchAssist in investigating incidents relating to engineering activitiesAssist in specifying methods and procedures to achieve engineering requirementsAssist in the planning and decommissioning of engineering equipment, processes or facilities+118 more
How you’ll actually learn this
One-to-one, on your own real work
A qualification is usually something done to you: sit the class, sit the exam, hope it sticks. Here it’s the opposite. You learn it one-to-one with a companion, on your own real work, and you keep going until you can use it, not just recall it.
One-to-one, on your real workNo lectures, no past-papers. Every unit is practised on the actual tasks your job throws at you, a tutor beside you, not a video in front of you.
Taught to the top, not the testMost courses stop at remembering. Your companion keeps climbing: analysing, judging, creating. That’s the part a machine can’t do for you.
Credits you keep, a map that continuesEvery unit is regulated and yours for good. The day you finish, Zavmo already knows the next role your new credits open.
Applied to your work in any of these jobs
Which job do you mean?
This unit enables learners to address performance problems affecting team members within legal and organisational frameworks. Learners will identify issues, communicate effectively and sensitively, and establish action plans to improve performance.
How the thinking builds
- Remember
- Understand
- Apply
- Analyse
- Evaluate
- Create
Built for ETCAL Level 4 NVQ Extended Diploma in Engineering Manufacture
182 units in this credential, in the order it lists them, awarded by ETC Awards Limited.
- Address performance problems affecting team members
- Agree a budget
- Analyse the market in which your organisation operates
- Applying quality function deployment _QFD_
- Assembling Structural Sub Assemblies to Produce a Public Service Vehicle
- Assembling and testing electronic circuits
and 176 more in the full unit list below.
One to one, not one to many
No two people run this the same way
A course is written once and handed to everyone. This is assembled around you, and keeps changing as it learns you. Five things it reads, and what each one changes.
- Your actual work Every unit is taught against a live piece of your own work, not a worked example from a textbook.
- What you already know The first conversation finds your starting point, so you skip what you can already do and spend the time on what you cannot.
- The conditions you learn under Not a learning-styles quiz. The evidence does not support those. The dimensions the research does back, read once and used to shape the plan.
- How far you got last time It picks up mid-thought. The tutor knows what you said, what you struggled with, and what it asked you to try.
- Which tutor suits the moment Twelve of them, each for a different kind of thinking. The one who walks you through a first idea is not the one who stress-tests it.
See how you learn, free. Eight questions, no sign-up. A directional taster; the diagnostic inside Zavmo goes deeper and keeps adapting.
Why it sticks
Most courses stop at remembering
There’s a well-known ladder of how deeply you learn something, called Bloom’s Taxonomy. Most courses get you up the first two rungs: you remember some facts, you pass a test, you forget it. Real skill lives at the top. Judging, deciding, creating. And this isn’t a generic ladder: every rung has a named Zavmo tutor who walks you up it.
- 6CreateThe Creative Catalyst
- 5EvaluateThe Evidence Evaluator
- 4AnalyseThe Analyst
- 3ApplyThe Coach
- 2UnderstandThe Connector
- 1RememberThe Builder
Where most courses leave you Where Zavmo takes you
Why this matters: AI can already remember and understand for you. What it can’t do is
take your real problem and judge the right call. So the only learning worth paying
for is the learning that takes you to the top. That’s exactly what a tutor doing it with
you, on your real work, is for.
The value
Why the companion is worth £70 a month
You’re not paying for the units. They’re regulated, and the same wherever you earn them. You’re paying for the one thing that decides whether you actually get there: a companion that makes them stick, on your real work.
That is one-to-one on this qualification, every day, on the work you already do, for £70 a month. Your first module is free, so you can see the teaching before you pay for any of it. Billed monthly, cancel any time and billing stops.
Earned on your own work, taught to the top.
Everything you just read, learned one-to-one on the job you already do. Your first module is free, so you can see the teaching before you pay for any of it.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.