Energy & Environment Awards · RQF Level 3
EEA Level 3 Diploma for Engineering Maintenance Technician (Electrical/Instrumentation and Control)
You don’t just earn this. You learn to use it, one-to-one, on your own real work.
- LevelRQF Level 3
- Total credits197
- Guided learning1,396 hours
- Units in this qualification17
Awarded by Energy & Environment Awards · on the Ofqual register
Start here
See how this course maps onto your role
Ten quick questions, one per Future Fluency, asked against this qualification rather than a generic one.
About 5 minutes · No card · Nothing to commit to
What you’ll learn
What each unit actually teaches you to do
Aimed at engineering maintenance technicians, this Level 3 diploma focuses on electrical, instrumentation, and control systems. The qualification includes the safe isolation of instrumentation, fault diagnosis, and maintenance procedures. It also covers working with relevant technology and systems.
These are the units Energy & Environment Awards registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated, and every one you earn is yours to keep.
Complying with business operations and quality systems within engineering maintenanceReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand the key business operation considerations required for engineering maintenance
- Know and understand equipment life cycle considerations and their impact on maintenance planning and decision-making
- Understand and apply quality management and continuous improvement systems used in engineering environments
- Know and understand Standard Operating Procedures (SOPs) in engineering maintenance
- Know and understand the principles and practices of Foreign Material Exclusion (FME) in maintenance operations
- Apply foreign material exclusion (FME) procedures during maintenance activities
Diagnose electrical system faults and implement problem solving techniquesReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand the common failure modes for electrical equipment and control systems
- Know and understand the fault finding and rectification techniques and use of diagnostic equipment when maintaining electrical systems
- Know and understand problem solving and critical reasoning techniques when maintaining electrical systems
- Apply fault finding and rectification techniques, including the use of diagnostic equipment when maintaining electrical systems
- Apply problem solving and critical reasoning techniques when maintaining electrical systems
Diagnose instrumentation and control system faults and implement problem solving techniquesReal unit · Energy & Environment Awards
What you'll be able to do
- Identify and describe common failure modes for instrumentation and control equipment and control systems
- Explain fault finding and rectification techniques and the use of diagnostic equipment when maintaining instrumentation and control systems
- Explain problem solving and critical reasoning techniques when maintaining instrumentation and control systems
- Apply fault finding and rectification techniques, including the use of diagnostic equipment when maintaining instrumentation and control systems
- Apply problem solving and critical reasoning techniques when maintaining instrumentation and control systems
Principles and regulations of electrical engineering systemsReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand the regulations which are applicable to working with electrical systems
- Know and understand the operating principles of electrical devices and equipment
- Know and understand electrical engineering principles, terminology and calculations
Principles and regulations of instrumentation and control engineering maintenanceReal unit · Energy & Environment Awards
What you'll be able to do
- Identify and explain the regulations applicable to working with instrumentation and control equipment and systems
- Explain instrumentation and control engineering principles, terminology and calculations
- Describe the operating principles of instrumentation and control devices and equipment
Principles of engineering maintenance, regulations and standardsReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand sectors in which engineering maintenance takes place and the roles and responsibilities of a maintenance technician
- Know and understand engineering standards and maintenance strategies
- Know and understand environmental regulations and sustainability requirements relevant to the engineering maintenance sector
- Implement engineering maintenance standards and operational procedures
- Apply environmental regulations and sustainability requirements within the workplace
Undertake maintenance, inspection, calibration and testing activities for electrical systemsReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand how to inspect, maintain, calibrate and test electrical plant, equipment and systems.
- Know and understand how to select, use, care for and calibrate tools and equipment used in electrical maintenance.
- Conduct inspections and carry out testing on electrical systems in accordance with procedures.
- Remove and replace electrical components within plant, equipment and systems safely and effectively.
- Identify any requirements to clean electrical equipment and be able to complete the task to required standards.
- Complete functional testing of electrical equipment and systems to ensure correct operation.
Undertake maintenance, inspection, calibration and testing activities for instrumentation and control systemsReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand the methods and procedures for inspecting instrumentation and control equipment to identify faults and potential problems
- Know and understand the methods and procedures for maintaining instrumentation and control equipment to ensure optimal performance and longevity
- Know and understand the methods and procedures for calibrating instrumentation and control equipment to ensure accuracy and reliability
- Know and understand the methods and procedures for testing instrumentation and control equipment to verify their functionality and performance
- Know and understand how to select, use, care for and calibrate tools and equipment used in instrumentation and control maintenance activities
- Conduct inspections and carry out testing on instrumentation and control systems, identifying any defects or malfunctions
- Check the calibration of instruments and systems and make adjustments where required to ensure accuracy
- Identify any requirements to clean instrumentation and equipment and be able to complete the task safely and effectively
- Remove and replace instrumentation and sensors within instrumentation and control systems, ensuring correct fitting and connection
- Complete functional testing of instrumentation and control equipment and systems to verify their correct operation
Undertake planning, organising and engineering maintenance tasksReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand planning, prioritisation, organisation, and time management techniques in engineering maintenance tasks
- Apply planning, prioritising, organising, and time management techniques to prepare and manage maintenance tasks
- Identify and organise the resources required to complete maintenance tasks
- Respond and adapt to work demands
- Identify correct equipment for maintenance and verify plant configuration against defined specifications
- Prepare the work area to undertake maintenance tasks
- Follow control procedures for maintenance tools and equipment
- Reinstate the work area after completing maintenance tasks
Undertake safe isolation and deisolation of electrical systems whilst conducting maintenance activitiesReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand how to isolate and deisolate when working with electrical systems
- Confirm electrical isolation has been completed, including testing for dead
- Complete deisolation of electrical and connected services and confirm deisolation has been completed
- Reconnect the various equipment required when maintaining electrical systems
Undertake safe isolation and deisolation of instrumentation and control systems whilst conducting maintenance activitiesReal unit · Energy & Environment Awards
What you'll be able to do
- Describe how to isolate and deisolate instrumentation and control systems when conducting maintenance activities
- Explain the procedures for ensuring that instrumentation and control systems have been safely isolated prior to maintenance
- Demonstrate how to confirm electrical isolation has been completed, including testing for dead circuits
- Describe the process for reconnecting equipment after maintaining instrumentation and control systems
- Explain how to complete deisolation of electrical and connected services and confirm deisolation has been completed
Working effectively as part of a team to undertake engineering maintenanceReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand the principles of effective team working within an engineering environment.
- Know and understand the principles of equity, diversity and inclusion in the workplace.
- Know and understand communication methods and techniques relevant to engineering maintenance activities.
- Know and understand the requirements for documenting information within engineering maintenance.
- Know and understand the principles of continuous improvement and how these apply to the role of a maintenance technician.
- Work and communicate effectively as part of a team to undertake engineering maintenance tasks.
- Produce documentation, record information and report inaccuracies with information within an engineering workplace.
- Undertake continuous professional development to maintain and enhance competence as an engineering maintenance technician.
Working with engineering information, materials, new technology and technical drawings required for maintenanceReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand sources of engineering information to support maintenance activities
- Know and understand how to interpret engineering sketches, drawings, and graphical information
- Know and understand the principles, technologies, and benefits of Industry 4.0 in engineering maintenance environments
- Know and understand the properties of engineering materials and how they affect suitability and performance in maintenance applications
- Review and use technical information to carry out maintenance activities accurately and safely
Working with mathematical principles and formulae required for engineering maintenanceReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand mathematical calculations and methods required for engineering maintenance
- Apply mathematical principles and formulae to complete engineering maintenance tasks
Working with technology, equipment and systems required for electrical engineering maintenanceReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand the functions and applications of electrical circuits.
- Know and understand the types of diagrams used when working with electrical plant and systems.
- Know and understand the types of cables used in the installation and maintenance of electrical plant and systems.
- Know and understand methods of cable termination when maintaining electrical plant and systems.
- Select, check and use tools effectively when maintaining electrical plant and systems.
- Prepare and conduct terminations on electrical cables to required standards.
- Set up and adjust electrical plant and systems to meet operational requirements.
- Use innovative engineering technology to improve maintenance activities.
Working with technology, equipment and systems required for instrumentation and control engineering maintenanceReal unit · Energy & Environment Awards
What you'll be able to do
- Describe the installation procedures for instrumentation and controls equipment
- Explain the principles of operation of open and closed loop systems
- Describe the functions and applications of instrumentation and control systems
- Identify and interpret the types of diagrams used when working with instrumentation and control systems
- Identify the types of cables used in the installation and maintenance of instrumentation and control systems
- Select, check and use appropriate tools when maintaining instrumentation and control systems
- Check instrumentation and control loops to ensure correct operation
- Set up and adjust instrumentation and control systems to meet specified parameters
Working within health and safety requirements in engineering maintenance to ensure complianceReal unit · Energy & Environment Awards
What you'll be able to do
- Know and understand health and safety regulations and working practices that apply to an engineering workplace
- Know and understand the hazards and risks in the engineering workplace and how to mitigate these
- Know and understand the requirement for personal protective equipment to be used in an engineering workplace
- Know and understand security procedures for an engineering workplace
- Know and understand emergency and incident response procedures
- Manage health and safety risks in an engineering workplace and apply measures to control these
- Apply health and safety procedures in an engineering workplace to ensure compliance with regulations and standards
- Implement security procedures in an engineering workplace
- Carry out emergency response procedures in an engineering workplace
The honest bit
You’ve started things before
Most courses were built for a room full of people who aren’t you. A cohort moves on whether or not your week allowed it, and by the third week the thing you’re behind on becomes the reason you stop opening it.
There’s no cohort here, and no timetable to fall behind. Before anything starts, Zavmo asks when you’re sharpest and how long you can realistically sit down for, then builds the sessions around those answers. A bad fortnight changes your pace. It doesn’t put you behind.
And you only pay once you start learning. Searching and planning are free, and you can cancel any time — so the cost of finding out is an afternoon, not a year.
Your passport
Every credit is a stamp you keep
Level 3 credits are regulated. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you’ve earned and what’s next.
Each stamp is a real unit registered against this qualification.
Who’d teach you this
The Evidence Evaluator
Assessor
Helps you show what you can actually do, gathering the evidence that proves it as you learn.
Meet all twelve tutorsWhere this connects
Where these credits take you
A qualification is never a dead end here. See the jobs its credits open, the national occupational standards its units map to, and the future skills they quietly build.
- Carry out fault diagnosis on instrumentation and control equipment and circuits used in food and drink operations
- Diagnose and determine the causes of faults in instrument and control systems
- Diagnose and rectify faults in environmental technology systems
- Position and install instrumentation and control equipment and systems in engineering construction plant
- Understand how to carry out fault diagnosis on instrumentation and control equipment and circuits used in food and drink operations
- Use engineering drawings and documents in maintenance activities in food and drink operations
- Using and maintaining business procedures and protocols in an engineering environment
Where this can lead
HSE Specialist/Engineer
Your journey in HSE starts here with a solid foundation, but the possibilities for growth and impact are truly vast. We're looking for someone who sees this role not just as a job, but as a critical step in a rewarding career dedicated to protecting people and the planet.
See the whole journey →Showing 6 roles, drawn from 11 job records mapped to this qualification.
Skills it covers
What the job actually needs. These are the standards the units are built against, in the words employers and awarding bodies already use for the work itself.
How you’ll actually learn this
One-to-one, on your own real work
A qualification is usually something done to you: sit the class, sit the exam, hope it sticks. Here it’s the opposite. You learn it one-to-one with a companion, on your own real work, and you keep going until you can use it, not just recall it.
Applied to your work in any of these jobs
Learners will gain knowledge of business operations, equipment life cycle considerations, and quality management systems within engineering maintenance. The unit covers the impact of maintenance on business performance and the application of continuous improvement and cost-effective maintenance strategies.
- Remember
- Understand
- Apply
- Analyse
- Evaluate
- Create
Built for EEA Level 3 Diploma for Engineering Maintenance Technician (Electrical/Instrumentation and Control)
17 units in this credential, in the order it lists them, awarded by Energy & Environment Awards.
- Complying with business operations and quality systems within engineering maintenance
- Diagnose electrical system faults and implement problem solving techniques
- Diagnose instrumentation and control system faults and implement problem solving techniques
- Principles and regulations of electrical engineering systems
- Principles and regulations of instrumentation and control engineering maintenance
- Principles of engineering maintenance, regulations and standards
and 11 more in the full unit list below.
One to one, not one to many
No two people run this the same way
A course is written once and handed to everyone. This is assembled around you, and keeps changing as it learns you. Five things it reads, and what each one changes.
- Your actual work Every unit is taught against a live piece of your own work, not a worked example from a textbook.
- What you already know The first conversation finds your starting point, so you skip what you can already do and spend the time on what you cannot.
- The conditions you learn under Not a learning-styles quiz. The evidence does not support those. The dimensions the research does back, read once and used to shape the plan.
- How far you got last time It picks up mid-thought. The tutor knows what you said, what you struggled with, and what it asked you to try.
- Which tutor suits the moment Twelve of them, each for a different kind of thinking. The one who walks you through a first idea is not the one who stress-tests it.
See how you learn, free. Eight questions, no sign-up. A directional taster; the diagnostic inside Zavmo goes deeper and keeps adapting.
Why it sticks
Most courses stop at remembering
There’s a well-known ladder of how deeply you learn something, called Bloom’s Taxonomy. Most courses get you up the first two rungs: you remember some facts, you pass a test, you forget it. Real skill lives at the top. Judging, deciding, creating. And this isn’t a generic ladder: every rung has a named Zavmo tutor who walks you up it.
- 6CreateThe Creative Catalyst
- 5EvaluateThe Evidence Evaluator
- 4AnalyseThe Analyst
- 3ApplyThe Coach
- 2UnderstandThe Connector
- 1RememberThe Builder
Where most courses leave you Where Zavmo takes you
The value
Why the companion is worth £70 a month
You’re not paying for the units. They’re regulated, and the same wherever you earn them. You’re paying for the one thing that decides whether you actually get there: a companion that makes them stick, on your real work.
That is one-to-one on this qualification, every day, on the work you already do, for £70 a month. Your first module is free, so you can see the teaching before you pay for any of it. Billed monthly, cancel any time and billing stops.
Earned on your own work, taught to the top.
Everything you just read, learned one-to-one on the job you already do. Your first module is free, so you can see the teaching before you pay for any of it.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.