How you’d get it
How you’d get this certificate
- Zavmo teaches you. You learn the units one-to-one with an AI tutor, on your own work.
- You register with an approved centre. That is a college, training provider or employer Excellence, Achievement & Learning Limited has approved to offer this qualification. Zavmo is not an approved centre, so you register with them, not with us.
- The centre assesses, and Excellence, Achievement & Learning Limited awards. A qualified assessor at the centre judges your evidence, and the certificate comes from Excellence, Achievement & Learning Limited.
01What it is
Level 3 Diploma in Aviation Maintenance (Development Competence) focuses on the skills, knowledge and behaviours required for the development phase of relevant apprenticeship standards in the aviation maintenance sector.
These are the units Excellence, Achievement & Learning Limited registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated. Zavmo teaches towards them on your own work, and work done here is recognised as prior learning under the agreements we hold.
Zavmo is not an awarding body, is not an approved centre, and is not affiliated with Excellence, Achievement & Learning Limited. It does the teaching and the mapping. Excellence, Achievement & Learning Limited sets this qualification and awards it, and a qualified human assessor makes the assessment decision.
Free first step
Try a free Future Fluency lesson first
The free part is a Future Fluency lesson on using AI at work. It is not part of this qualification. Next, a free account. We build your plan for this qualification as you set up. Teaching towards this qualification begins when you subscribe.
No card · Nothing to commit to
02The units
What each unit actually teaches you to do
Carrying Out Flight Servicing and Routine Maintenance of Aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
Covers routine servicing tasks and maintenance checks necessary for aircraft operation.
What you'll be able to do
- Perform flight servicing and routine aircraft maintenance tasks competently.
Complying with statutory regulations and organisational safety requirements (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit covers the necessary safety regulations and organisational procedures ensuring compliance within the aviation maintenance field.
What you'll be able to do
- Demonstrate understanding of statutory regulations and organisational requirements.
Complying with statutory regulations and organisational safety requirements (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit covers the identification and compliance with statutory regulations and organisational safety requirements relevant to aviation maintenance. You'll develop knowledge of applicable health and safety legislation, procedures for compliance, and the consequences of non-compliance within their work area.
What you'll be able to do
- Demonstrate compliance with statutory regulations applicable to their area of work.
- Demonstrate compliance with organisational safety requirements in accordance with approved procedures.
- Apply general responsibilities as defined in the Health and Safety at Work Act.
Levelling and weighing aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
Focuses on the techniques needed for accurately levelling and weighing aircraft for maintenance purposes.
What you'll be able to do
- Conduct accurate levelling and weighing of aircraft.
Lifting and trestling/shoring aircraft for maintenance/repair operations (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
Covers the procedures and safety measures for lifting and supporting aircraft during maintenance.
What you'll be able to do
- Implement safe methods for lifting and supporting aircraft.
Maintaining air conditioning systems on aircraft (Aviation Maintenance) (ATA 21) Real unit · Excellence, Achievement & Learning Limited
You'll gain the ability to maintain aircraft air conditioning systems in accordance with maintenance manuals and approved documentation. The unit covers performing maintenance tasks using appropriate tools while adhering to safety and procedural requirements.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft air conditioning systems.
- Follow the aircraft maintenance manual when maintaining air conditioning systems.
- Follow approved change documentation (service bulletin) when maintaining air conditioning systems.
- Adhere to airworthiness requirements when maintaining air conditioning systems.
- Maintain air conditioning systems on fixed wing aircraft.
- Maintain air conditioning systems on rotary winged aircraft.
- Maintain units and components that pressurise the fuselage.
- Maintain units and components that heat the fuselage.
- Maintain units and components that cool the fuselage.
- Maintain units and components that control moisture in the fuselage.
- Maintain units and components that filter air in the fuselage.
- Maintain units and components that treat air in the fuselage.
- Remove air conditioning system components.
- Fit air conditioning system components.
- Test air conditioning system components.
- Use the approved procedure for isolating the system before breaking into the system circuit.
- Fit approved replacements for removed components.
- Test the completed system to meet the aircraft maintenance manual requirements.
- Adjust the completed system to meet the aircraft maintenance manual requirements.
- Test the completed system to meet change documentation (service bulletin) requirements.
- Adjust the completed system to meet change documentation (service bulletin) requirements.
- Test the completed system to meet airworthiness requirements.
- Adjust the completed system to meet airworthiness requirements.
Maintaining airborne auxiliary power systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit covers maintenance of airborne auxiliary power systems on aircraft, adhering to safety procedures and approved practices. You'll understand the purpose and operation of APUs, perform maintenance tasks, and document activities accurately to meet airworthiness standards.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft auxiliary power systems, in accordance with the aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Explain the units and components of airborne auxiliary power units (APU) which are installed on the aircraft for the purpose of supplying a single type or combination of auxiliary electric, hydraulic, pneumatic or other power
- Describe the power and drive section, fuel, ignition and control systems, wiring, indicators, plumbing, valves and ducts up to the power unit
- Perform maintenance activities including the removal, fitting and testing of a range of airborne auxiliary power system components
- Remove required components and fit approved replacements, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining auto flight systems on aircraft (Aviation Maintenance) (ATA 22) Real unit · Excellence, Achievement & Learning Limited
You'll gain the competence to maintain aircraft auto flight systems by following approved maintenance manuals and change documentation. The unit covers safe maintenance practices and compliance with airworthiness requirements for both fixed wing and rotary wing aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft auto flight systems in accordance with approved aircraft maintenance manuals, change documentation, and airworthiness requirements.
- Apply maintenance activities to both fixed wing and rotary winged aircraft.
- Maintain units and components that automatically control the flight of the aircraft, including direction, heading, altitude, and speed.
- Remove, fit, and test a range of auto flight components.
- Select the correct tools and equipment based on the operations to be performed and the components to be removed or replaced.
- Maintain aircraft components including computers, controllers, air data units, detectors, gyros, trim units, actuators, stick position cancellers, and angle of attack and stall warning components.
- Remove required components and fit approved replacements.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation, and airworthiness requirements.
Maintaining bleed air systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit equips learners to maintain aircraft engine bleed air systems on fixed wing and rotary wing aircraft. You'll apply approved maintenance manuals and change documentation, ensuring safe maintenance practices and adherence to airworthiness standards.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft engine bleed air systems in accordance with approved aircraft maintenance manuals, change documentation, and airworthiness requirements.
- Apply maintenance activities to both fixed wing and rotary winged aircraft.
- Maintain units and components that conduct air to the extension shaft and torquemeter assembly.
- Maintain compressor bleed systems used to control flow of air through the engine, cooling air systems, and heated air systems for engine anti-icing.
- Remove, fit, and test a range of engine bleed air system components.
- Remove required components and fit approved replacements.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation, and airworthiness requirements.
Maintaining cabin systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
It teaches you to perform maintenance on aircraft cabin systems, including passenger entertainment and communication systems. You'll adhere to safety procedures, follow approved manuals, accurately record maintenance activities, and understand the importance of continuous professional development.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft cabin systems in accordance with the aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Identify the training and development required to maintain aircraft cabin systems.
- Maintain units and components which provide a means of entertaining passengers.
- Maintain units and components which provide communication within the aircraft.
- Maintain the means by which passengers and cabin crew can access communications equipment to exchange data and messages with other air or ground stations.
Maintaining cargo and accessory compartments on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll learn to maintain aircraft cargo and accessory compartments following safety procedures and approved documentation. The unit covers applying maintenance techniques in accordance with airworthiness requirements and accurate record keeping.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft cargo and accessory compartments in accordance with the aircraft maintenance manual, approved change documentation (service bulletin), and airworthiness requirements
- Apply maintenance activities to both fixed wing and rotary winged aircraft cargo and accessory compartments
- Maintain equipment mounted on the aircraft and/or contained in the cargo and accessory compartments
- Perform maintenance activities including the removal, fitting and, where appropriate, testing of a range of equipment
- Select the correct tools and equipment to use, based on the operations to be performed and the equipment to be removed or fitted
- Maintain aircraft equipment including cargo/baggage handling equipment, cargo restraints, sound and heat insulation, removable and fixed cabinets, fire suppressant equipment and other similar equipment
- Remove required components and fit approved replacements, as appropriate
- Check and adjust the equipment to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining communication systems on aircraft (Aviation Maintenance) (ATA 23) Real unit · Excellence, Achievement & Learning Limited
This unit covers maintenance of aircraft communication systems, ensuring adherence to safety procedures and approved documentation. You'll maintain communication components, accurately record activities, and identify appropriate training courses for continued competence.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft communication systems in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Identify the training and development required to maintain aircraft communication systems.
- Maintain units and components which provide a means of communicating from one part of the aircraft to another.
- Maintain units and components which provide a means of communicating between aircraft and aircraft to ground stations.
- Remove, fit and test a range of communication system components.
- Select the correct tools and equipment to use, based on the operations to be performed and the components to be removed or replaced.
- Remove required components and fit approved replacements.
- Test and adjust the completed system to meet the aircraft maintenance manual or change documentation (service bulletin) and airworthiness requirements.
Maintaining doors on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
It teaches you to perform maintenance on aircraft doors, adhering to safety procedures and using approved manuals and documentation. You'll learn to carry out maintenance on both fixed wing and rotary wing aircraft doors, ensuring compliance with airworthiness standards.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft doors in accordance with the approved aircraft maintenance manual, structural repair manual, approved change documentation (service bulletin) and airworthiness requirements
- Apply maintenance activities to both fixed wing and rotary winged aircraft doors
- Maintain those removable units used for entrance or exit, and for enclosing other structure contained within the fuselage
- Perform maintenance activities including the removal, fitting and, where appropriate, testing of a range of doors/door equipment
- Make repairs to primary and secondary airframe/door structures, as appropriate to the aircraft type
Maintaining electrical power systems on aircraft (Aviation Maintenance) (ATA 24) Real unit · Excellence, Achievement & Learning Limited
You'll develop competence in maintaining aircraft electrical power systems by applying approved maintenance manuals and change documentation. The unit covers safety procedures and identification of electrical system components on fixed wing and rotary wing aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft electrical power systems, in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Apply knowledge to both fixed wing and rotary winged aircraft.
- Identify units and components which generate, control and supply AC and/or DC electrical power for other systems, as applicable to the aircraft type.
- Remove, fit and test a range of electrical power system components.
- Select the correct tools and equipment to use, based on the operations to be performed and the components to be removed or replaced.
- Identify aircraft components such as control units, batteries, generators, alternators, regulators, invertors, transformers, rectifier units, contactors and relays, under-voltage phase sequence units, switches and circuit breakers.
- Remove required components and fit approved replacements, as appropriate.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Maintaining engine controls on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll develop competence in maintaining aircraft engine control systems by following approved manuals and safety procedures. The unit includes performing maintenance tasks, accurate documentation, and recognising relevant training requirements for system maintenance.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft engine control systems in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Identify the training and development required to maintain aircraft engine control systems.
- Maintain units and components which govern operation of the engine.
- Maintain units and components that are interconnected for emergency shutdown.
- Remove, fit and test a range of engine control components.
- Select the correct tools and equipment to use, based on the operations to be performed and the components to be removed, fitted and tested.
- Remove required components and fit approved replacements.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Maintaining engine exhaust systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll gain competence in maintaining aircraft engine exhaust systems by adhering to approved maintenance manuals, change documentation, and airworthiness standards. The unit emphasises safe maintenance practices and accurate recording of activities for both fixed wing and rotary aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft engine exhaust systems in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Apply maintenance activities to both fixed wing and rotary winged aircraft, covering the portion of the system which directs the engine exhaust gases overboard
- Maintain turbine engine units external to the basic engine, such as thrust reversers and noise suppressors
- Maintain reciprocating engine augmentation, stacks and clamps
- Remove a range of engine exhaust system components
- Fit approved replacements for engine exhaust system components, as appropriate
- Test and adjust the completed exhaust system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining engine fuel and control systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to maintain aircraft engine fuel and control systems by following approved manuals and change documentation. The unit includes performing maintenance, defect identification and rectification, and compliance with airworthiness standards on various aircraft types.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft engine fuel and control systems, in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Carry out maintenance activities on fixed wing and rotary winged aircraft
- Carry out maintenance activities on both turbine and reciprocating engines
- For turbine engines, carry out maintenance activities on those units and components and associated mechanical systems or electrical circuits which deliver or control fuel to the engine beyond the main fuel quick disconnect
- For turbine engines, carry out maintenance activities on engine driven fuel pumps and filter assembly, main and thrust augmention fuel controls, electronic temperature datum control, temperature datum valve, fuel manifold, fuel nozzles, fuel enrichment system, speed sensitivity switch, relay box assembly and solenoid drip valves
- For reciprocating engines, carry out maintenance activities on those units and components which deliver metered fuel and air to the engine, and includes the carburettor master control from the inlet side to the discharge nozzles, injection pumps, carburettor, injection nozzles and fuel primer
- For reciprocating engines, carry out maintenance activities on the air portion including units and components from the scoop inlet to the vapour return and impeller chamber
- Perform maintenance activities including the removal, fitting and testing of a range of engine fuel system components
- Use the approved procedure for correctly isolating the fuel supply and the system before breaking into the system circuit
- Remove the required components and fit approved replacements, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining engine indicating systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
It teaches you to maintain aircraft engine indicating systems in accordance with approved procedures and airworthiness requirements. You'll learn to perform maintenance on fixed wing and rotary wing aircraft, including accurate recording of activities.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft engine indicating systems in accordance with approved documentation and airworthiness requirements
- Maintain engine indicating systems on both fixed wing and rotary winged aircraft
- Maintain units, components and associated systems which indicate engine operation
- Maintain indicators, transmitters, analysers, phase detectors, instruments/gauges, amplifiers, generators, display units, transmitters, receivers and computers
- Remove, fit and test a range of aircraft engine indicating system components
- Use the approved procedure for correctly isolating the circuit/system
- Remove required components and fit approved replacements
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining engine starting systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to maintain aircraft engine starting systems, following approved maintenance manuals and airworthiness requirements. The unit covers removal, fitting, testing, and documentation of starting system components on various aircraft types.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft engine starting systems in accordance with approved documentation and airworthiness requirements
- Maintain engine starting systems on both fixed wing and rotary winged aircraft
- Maintain units and components used for starting the engine, including electrical, inertia air or other starter systems
- Remove, fit and test a range of starter system components
- Select the correct tools and equipment to use, based on the operations to be performed and the components to be removed or replaced
- Maintain aircraft starting system components such as starters, actuators, valves, solenoids, clutch assembly, ring gear, electrical modules and controls and other associated wiring and switches
- Remove required components and fit approved replacements
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining engine water injection systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll gain the skills to maintain aircraft engine water injection systems following approved maintenance manuals and change documentation. The unit includes defect identification and rectification, ensuring compliance with airworthiness requirements on fixed and rotary wing aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft engine water injection systems, in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Carry out maintenance activities on both fixed wing and rotary winged aircraft
- Carry out maintenance activities on the units and components which provide, deliver and inject water or water mixtures into the induction system
- Perform maintenance activities including the removal, fitting and testing of a range of engine water injection system components, such as water tanks/bladder cells, interconnectors, pumps, valves, controls, pipes, transmitters and indicators
- Use the approved procedure for correctly isolating the system before breaking into the system circuit
- Remove the required components and fit approved replacements, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining equipment and furnishings on aircraft (Aviation Maintenance) (ATA 25) Real unit · Excellence, Achievement & Learning Limited
You'll learn to maintain aircraft equipment and furnishings following approved manuals and safety procedures. The unit covers understanding the types and importance of equipment within aircraft compartments, performing maintenance, and accurate recording of activities.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft equipment and furnishings, in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Explain the removable items of equipment and furnishings externally mounted on the aircraft or contained in the flight, passenger, cargo and accessory compartments
- Perform maintenance activities including the removal, fitting and, where appropriate, testing of a range of equipment and furnishings
- Select the correct tools and equipment to use, based on the operations to be performed and the equipment to be removed or fitted
- Describe galley and toilet equipment, flight crew seats, tables, food containers, wardrobes, curtains, wall coverings, carpets, overhead storage compartments, movable partitions, mirrors and other similar equipment
- Remove required components and fit approved replacements, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining fire protection systems on aircraft (Aviation Maintenance) (ATA 26) Real unit · Excellence, Achievement & Learning Limited
This unit focuses on the maintenance of aircraft fire protection systems in line with approved manuals and service bulletins. You'll be able to safely isolate fire protection systems, fit extinguishing components, and ensure adherence to airworthiness standards.
What you'll be able to do
- Carry out maintenance activities on aircraft fire protection systems in accordance with the approved aircraft maintenance manual.
- Carry out maintenance activities on aircraft fire protection systems in accordance with approved change documentation (service bulletin).
- Carry out maintenance activities on aircraft fire protection systems in accordance with airworthiness requirements.
- Use the approved procedure for correctly isolating the fire protection system.
- Fit extinguishing trip defeat mechanisms before testing/troubleshooting the protection system circuit.
- Remove fire protection system components as required.
- Fit approved replacements for fire protection system components as appropriate.
- Test and adjust the completed fire protection system to meet the aircraft maintenance manual requirements.
- Test and adjust the completed fire protection system to meet change documentation (service bulletin) requirements.
- Test and adjust the completed fire protection system to meet airworthiness requirements.
Maintaining flight control systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the knowledge to maintain aircraft flight control systems safely and effectively. You'll use approved maintenance manuals and change documentation to perform maintenance that meets airworthiness requirements.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft flight control systems in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Identify units and components which manually control the flight, attitude and characteristics of the aircraft.
- Remove, fit and test a range of flight control components.
- Select the correct tools and equipment to use, based on the operations to be performed and the components to be removed, fitted and tested.
- Identify aircraft components such as ailerons and tabs, horizontal stabiliser, elevator, rudder, flaps, spoilers/drag devices, gust locks and dampers, and lift augmenting system components.
- Remove required components and fit approved replacements, as appropriate.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Maintaining flight control systems on rotorcraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
It teaches you to carry out maintenance on rotorcraft flight control systems using approved manuals and service bulletins. You'll gain skills in selecting appropriate tools and adhering to safety and airworthiness standards during maintenance activities.
What you'll be able to do
- Carry out maintenance activities on rotorcraft flight control systems in accordance with the approved rotorcraft maintenance manual.
- Carry out maintenance activities on rotorcraft flight control systems in accordance with approved change documentation (service bulletin).
- Carry out maintenance activities on rotorcraft flight control systems in accordance with airworthiness requirements.
- Select the correct tools and equipment to use based on the operations to be performed.
- Select the correct tools and equipment to use based on the components to be removed, fitted and tested.
- Remove rotorcraft flight control components as required.
- Fit approved replacements for rotorcraft flight control components as appropriate.
- Test and adjust the completed rotorcraft flight control system to meet the rotorcraft maintenance manual requirements.
- Test and adjust the completed rotorcraft flight control system to meet change documentation (service bulletin) requirements.
- Test and adjust the completed rotorcraft flight control system to meet airworthiness requirements.
Maintaining fuel systems on aircraft (Aviation Maintenance) (ATA 28) Real unit · Excellence, Achievement & Learning Limited
It teaches you to maintain aircraft fuel systems safely and in accordance with approved maintenance practices. You'll explain system components and purpose, perform maintenance activities, and document work accurately to ensure compliance with airworthiness standards.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft fuel systems, in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Explain the units and components which store and deliver fuel to the engine
- Describe engine driven fuel pumps for reciprocating engines, tanks (bladder), tanks (integral), tanks auxiliary, valves, boost pumps, fuel dump systems, fuel tank leak detection components, fuel draining, fuel tank capacitance units, float switches, float valves, temperature sensing, refuel diffuser systems, dip sticks, magnetic level indicators, fuel tank baffling, flame arrester components and tank venting systems
- Perform maintenance activities including the removal, fitting and testing of a range of fuel system components
- Use the approved procedure for correctly isolating the system before breaking into the system circuit
- Remove required components and fit approved replacements, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining fuselage, nacelles and pylons on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll gain skills to maintain aircraft fuselage, nacelles, and pylons by applying approved maintenance and structural repair manuals. The unit emphasises accurate documentation, adherence to change instructions, and compliance with airworthiness standards for fixed wing and rotary wing aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft fuselage, nacelles, and pylons in accordance with approved aircraft maintenance manuals, structural repair manuals, change documentation, and airworthiness requirements.
- Apply maintenance activities to both fixed wing and rotary winged aircraft.
- Maintain structural units and associated components that make up the compartments for equipment, passengers, crew, and cargo/baggage.
- Maintain structural units and associated components that provide a means of mounting and housing the power plant or rotor assembly.
- Remove, fit, and test a range of fuselage components where appropriate.
- Select the correct tools and equipment based on the operations to be performed and the components to be removed or fitted.
- Remove required components, fit approved replacements, and make repairs to primary and secondary airframe structures, as appropriate to the aircraft type.
Maintaining hydraulic systems on aircraft (Aviation Maintenance) (ATA 29) Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the knowledge and skills to maintain aircraft hydraulic systems safely and effectively. You'll apply approved maintenance manuals and service bulletins to carry out maintenance activities on hydraulic systems for fixed wing and rotary wing aircraft, ensuring airworthiness compliance.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft hydraulic systems in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Apply maintenance activities to both fixed wing and rotary winged aircraft, covering the units and components which supply the hydraulic fluid under pressure (includes tanks, pumps, accumulators, valves, pipes) to a common point (manifold) for redistribution to other defined systems
- Use the approved procedure for correctly isolating and de-pressurising the system, breaking into the system circuit and catching/containing any spilled fluids
- Remove a range of hydraulic components
- Fit approved replacements for hydraulic components, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining ice and rain protection systems on aircraft (Aviation Maintenance) (ATA 30) Real unit · Excellence, Achievement & Learning Limited
You'll develop competence in maintaining aircraft ice and rain protection systems by following approved manuals and safety regulations. The unit includes understanding system principles, performing maintenance, and accurate documentation in compliance with airworthiness requirements.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft ice and rain protection systems, in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Explain the units and components which provide a means of preventing or disposing of ice and rain on various parts of the aircraft
- Perform maintenance activities including the removal, fitting and testing of a range of ice and rain protection system components associated with airfoil surfaces, air intakes and cowls, pitot static, windows and doors, antennas and radomes, propellers and rotors, water supply and drain lines, and ice detection and indicating systems
- Use the approved procedure for correctly isolating the system before breaking into the system circuit
- Remove required components and fit approved replacements, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining ignition systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll gain competence in maintaining aircraft ignition systems by adhering to approved maintenance procedures and airworthiness standards. The unit includes identification of system differences and accurate documentation of all maintenance activities.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft ignition systems in accordance with approved documentation and airworthiness requirements
- Maintain ignition systems on both fixed wing and rotary winged aircraft
- Maintain units and components which generate the electrical power, control and provide or distribute high and low voltage electrical current
- Remove, fit and test a range of ignition system components
- Select the correct tools and equipment to use, based on the operations to be performed and the components to be removed or replaced
- Maintain aircraft ignition components such as induction vibrators, magnetos, distributors, exciters, booster coils, transformers, storage capacitors, spark plugs, igniters, ignition harness and other associated wiring and switches
- Remove required components and fit approved replacements
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining indicating and recording systems on aircraft (Aviation Maintenance) (ATA 31) Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the skills to maintain aircraft indicating and recording systems. You'll perform maintenance tasks following approved procedures and use relevant manuals and documentation to ensure compliance with airworthiness standards.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft indicating and recording systems.
- Follow the approved aircraft maintenance manual when maintaining indicating and recording systems.
- Follow approved change documentation (service bulletin) when maintaining indicating and recording systems.
- Adhere to airworthiness requirements when maintaining indicating and recording systems.
- Maintain indicating and recording systems on fixed wing aircraft.
- Maintain indicating and recording systems on rotary winged aircraft.
- Maintain visual display units.
- Maintain instruments.
- Maintain instrument panels.
- Maintain control systems that give visual or aural warnings.
- Maintain units that record, store or compute data from unrelated systems.
- Maintain systems/units which integrate indicating instruments into a central display system.
- Maintain instruments not related to any specific system.
- Remove aircraft indicating and recording system components.
- Fit aircraft indicating and recording system components.
- Test aircraft indicating and recording system components.
- Use the approved procedure for correctly isolating the circuit/system.
- Fit approved replacements for removed components.
- Test the completed system to meet the aircraft maintenance manual requirements.
- Adjust the completed system to meet the aircraft maintenance manual requirements.
- Test the completed system to meet change documentation (service bulletin) requirements.
- Adjust the completed system to meet change documentation (service bulletin) requirements.
- Test the completed system to meet airworthiness requirements.
- Adjust the completed system to meet airworthiness requirements.
Maintaining landing gear on aircraft (Aviation Maintenance) (ATA 32) Real unit · Excellence, Achievement & Learning Limited
You'll develop the skills to maintain aircraft landing gear systems in accordance with approved maintenance manuals and service bulletins. The unit focuses on safe maintenance procedures, accurate documentation, and compliance with airworthiness requirements for both fixed wing and rotary aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft landing gear in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Apply maintenance activities to both fixed wing and rotary winged aircraft, covering the units and components which provide a means of supporting and steering the aircraft on the ground or water
- Maintain units and components which make it possible to retract and store the landing gear in flight (including main gear and nose wheel, tail skid assemblies, brakes, wheels, floats, skids, skis, doors, shock struts, tyres, linkages and indicating and warning systems)
- Use the approved procedure for correctly isolating and, where appropriate, de-pressurising the system, before breaking into the system circuit
- Remove a range of landing gear components
- Fit approved replacements for landing gear components, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining lighting systems on aircraft (Aviation Maintenance) (ATA 33) Real unit · Excellence, Achievement & Learning Limited
You'll learn to maintain aircraft lighting systems in accordance with approved manuals and safety procedures. The unit includes maintenance of various lighting components, accurate documentation, and identification of relevant training for system upkeep.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft lighting systems in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Identify the training and development required to maintain aircraft lighting systems.
- Maintain electrically powered units and components which provide for external and internal illumination.
- Remove, fit and test a range of lighting system components.
- Select the correct tools and equipment to use, based on the operations to be performed and the components to be removed or replaced.
- Remove required components and fit approved replacements.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Maintaining lubricating oil systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit covers maintenance activities on aircraft lubricating oil systems in accordance with approved manuals and change documentation. You'll perform maintenance tasks, identify defects, and ensure adherence to airworthiness requirements for both fixed and rotary wing aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft lubricating oil systems, in accordance with the aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Carry out maintenance activities on both fixed wing and rotary winged aircraft
- Carry out maintenance activities on the units and components external to the engine, which store and deliver lubricating oil to and from the engine
- Carry out maintenance activities on units and components from the lubricating oil engine outlet to the inlet, including the inlet and outlet fittings, tanks, radiators, valves, and the auxiliary oil systems
- Perform maintenance activities including the removal, fitting and testing of a range of lubricating oil system components
- Use the approved procedure for correctly isolating the system before breaking into the system circuit
- Remove the required components and fit approved replacements, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining navigation systems on aircraft (Aviation Maintenance) (ATA 34) Real unit · Excellence, Achievement & Learning Limited
It teaches you to maintain aircraft navigation systems following approved maintenance manuals, change documentation, and airworthiness requirements. You'll gain knowledge of navigation systems on fixed wing and rotary wing aircraft and perform compliant maintenance activities.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft navigation systems, in accordance with the aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Apply knowledge of both fixed wing and rotary winged aircraft navigation systems.
- Apply knowledge of units and components which provide aircraft navigational information, as applicable to the aircraft type.
- Perform maintenance activities including the removal, fitting and testing of a range of navigational components.
- Select the correct tools and equipment to use, based on the operations to be performed and the components to be removed or replaced.
- Maintain aircraft system components including items such as air data computers, pitot/static, distance measuring equipment (DME), very high frequency omnidirectional range (VOR), instrument landing (ILS), auto direction finder (ADF), global positioning (GPS), Doppler, long range navigation (LORAN), homing, inertial navigation system (INS), compasses and other devices, as applicable to the aircraft type.
- Remove the required components and fit approved replacements, as appropriate.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Maintaining oxygen systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll develop competence in maintaining aircraft oxygen systems, applying safety procedures and adhering to maintenance manuals and airworthiness requirements. The unit includes accurate recording of maintenance activities on both fixed wing and rotary wing aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft oxygen systems in accordance with the aircraft maintenance manual, approved change documentation (service bulletin), and airworthiness requirements
- Apply maintenance activities to both fixed wing and rotary winged aircraft oxygen systems
- Identify the units and components which store, regulate, and deliver oxygen to passengers and/or crew, including bottles, relief valves, shut-off valves, outlets, regulators, masks, and walk-around bottles
- Perform maintenance activities including the removal, fitting, and testing of a range of oxygen components
- Apply the approved procedure for correctly isolating the system before breaking into the system circuit
- Remove required components and fit approved replacements, as appropriate
- Recharge the system and test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin), and airworthiness requirements
Maintaining pneumatic systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll gain the skills to maintain aircraft pneumatic systems by following the aircraft maintenance manual and approved change documentation. The unit includes safe isolation and de-pressurisation procedures prior to maintenance to ensure compliance with airworthiness requirements.
What you'll be able to do
- Carry out maintenance activities on aircraft pneumatic systems in accordance with the aircraft maintenance manual.
- Carry out maintenance activities on aircraft pneumatic systems in accordance with approved change documentation (service bulletin).
- Carry out maintenance activities on aircraft pneumatic systems in accordance with airworthiness requirements.
- Use the approved procedure for correctly isolating and de-pressurising the pneumatic system before breaking into the system circuit.
- Remove pneumatic components as required.
- Fit approved replacements for pneumatic components as appropriate.
- Pressurise the pneumatic system.
- Test and adjust the completed pneumatic system to meet the aircraft maintenance manual requirements.
- Test and adjust the completed pneumatic system to meet change documentation (service bulletin) requirements.
- Test and adjust the completed pneumatic system to meet airworthiness requirements.
Maintaining power plant on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
It teaches you to maintain aircraft power plant systems, including engine air intakes and mounts, in accordance with approved manuals and safety procedures. You'll perform maintenance activities, record work accurately, and identify relevant training for ongoing competence.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft power plant in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Identify the training and development required to maintain aircraft power plant.
- Maintain the overall power package/engine dressing, inclusive of engine air intakes, engine mounts, cowling, scoops and cowl flaps.
- Carry out a complete engine change.
- Remove, fit and test a range of power plant components.
- Remove required components and fit approved replacements.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Maintaining propeller/propulsor systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the competence to maintain aircraft propeller and propulsor systems. You'll follow approved maintenance manuals and change documentation, ensuring adherence to airworthiness requirements for fixed and variable pitch propellers.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft propeller/propulsor systems, in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Apply knowledge of both fixed and variable pitch mechanical or electrical propellers, pumps, motors, governor, alternators, and those units and components external to or integral with the engine that are used to control the propeller blade angle.
- Apply knowledge of propeller spinner synchronizers.
- Apply knowledge of propulsor duct assemblies, including aerodynamic fairing of mechanical components, stators and vectoring systems.
- Perform maintenance activities including the removal, fitting and testing of a range of propeller/propulsor system components.
- Remove required components and fit approved replacements, as appropriate.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Maintaining radar systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll learn to maintain aircraft radar systems in compliance with maintenance manuals, service bulletins, and airworthiness requirements. The unit covers maintenance on radar systems for both fixed wing and rotary wing aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft radar systems in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Apply knowledge of both fixed wing and rotary winged aircraft radar systems.
- Apply knowledge of units and components associated with surveillance radar (including supplementary surveillance radar), weather radar, and obstacle warning systems (such as enhanced ground proximity warning systems - EGPWS), traffic collision and avoidance systems (TCAS), towed radar decoys, radar (radio) altimeter, tactical air navigation (TACAN), identification friend or foe (IFF), Doppler, and radar jamming devices, as applicable to the aircraft type.
- Perform maintenance activities including the removal, fitting and testing of a range of radar components.
- Select the correct tools and equipment to use, based on the operations to be performed and the components to be removed or replaced.
- Maintain aircraft radar components including items such as scanners, aerials, transponders, transmitters, receiver units, microwave generators, processors, power supply units, waveguides, intermediate frequency units, indicator units, radar displays, coolant units and control units, and other devices, as applicable to the aircraft type.
Maintaining reciprocating engine turbo‐supercharging systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit covers the maintenance of reciprocating engine turbo-supercharging systems on aircraft. You'll learn to perform maintenance activities safely and accurately, following approved aircraft maintenance manuals and service bulletins, and will record all maintenance in compliance with airworthiness requirements.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft reciprocating engine turbo-supercharging systems in accordance with the approved aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Apply maintenance activities to both fixed wing and rotary winged aircraft, including power recovery turbine assemblies and turbo-supercharging units when external to the engine
- Remove a range of engine turbo-supercharging system components
- Fit approved replacements for engine turbo-supercharging system components, as appropriate
- Test and adjust the completed turbo-supercharging system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining reciprocating engines on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll develop competence in maintaining aircraft reciprocating engines, including spark and compression ignition types. The unit covers maintenance activities in accordance with approved manuals and change documentation, emphasising safety and airworthiness compliance.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft reciprocating engines, both spark and compression ignition, in accordance with approved aircraft maintenance manuals, change documentation, and airworthiness requirements.
- Apply maintenance activities to both fixed wing and rotary winged aircraft.
- Apply general maintenance requirements to reciprocating engines.
- Remove, fit, and test a range of reciprocating engine components.
- Remove required components and fit approved replacements.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation, and airworthiness requirements.
Maintaining rotor blade and tail pylon folding systems on rotorcraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
It teaches you to maintain rotor blade and tail pylon folding systems on rotorcraft. You'll follow approved maintenance manuals and service bulletins to perform safe and compliant maintenance, including understanding the function of automatic and manual folding systems.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on rotor blade and tail pylon folding systems in accordance with the approved rotorcraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Maintain the whole of the system for ensuring automatic or manual folding and spreading of the rotor blades and/or tail pylon
- Maintain the mechanical, hydraulic, electrical and indicating equipment and systems permanently fitted to the rotorcraft
- Remove a range of rotor blade and tail pylon folding system components
- Fit approved replacements for rotor blade and tail pylon folding system components, as appropriate
- Test and adjust the completed system to meet the rotorcraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining rotor drive systems on rotorcraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll gain the skills to maintain rotorcraft main and tail drive systems following approved maintenance practices and safety procedures. The unit covers understanding component functions, performing maintenance, and accurate documentation in compliance with airworthiness requirements.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on rotorcraft main and/or tail drive systems in accordance with the approved rotorcraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements
- Explain the main and tail rotor drive, including all components transmitting power to the rotors, such as engine coupling components, driveshafts and bearings, drive supports, clutch and freewheel units, gearboxes and their components, accelerometers, vibration monitoring equipment and indicating systems which show operation or activation of the rotor systems
- Perform maintenance activities including the removal, fitting and testing of a range of main and/or tail rotor drive system components
- Remove required components and fit approved replacements, as appropriate
- Test and adjust the completed system to meet the rotorcraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining rotor systems on rotorcraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the skills to maintain rotorcraft main and tail rotor systems. You'll follow approved maintenance procedures, apply airworthiness requirements, and document maintenance activities accurately for rotor head assemblies, blades, and associated components.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on rotorcraft main and/or tail rotors in accordance with approved documentation and airworthiness requirements
- Maintain the main and tail rotor head assembly, rotor blades and blade folding system
- Maintain swashplate assemblies and rotor shaft units
- Maintain indicating systems which show operation or activation of the rotor systems
- Remove, fit and test a range of main and/or tail rotor system components
- Remove required components and fit approved replacements
- Test and adjust the completed system to meet the rotorcraft maintenance manual, change documentation (service bulletin) and airworthiness requirements
Maintaining stabilisers on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit equips learners to maintain aircraft stabilisers by adhering to approved procedures and airworthiness standards. You'll be able to remove, fit, test, and repair stabiliser components while accurately documenting maintenance activities.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft stabilisers in accordance with approved documentation and airworthiness requirements
- Remove, fit and test a range of aircraft stabiliser components
- Make repairs to primary and secondary airframe/stabiliser structures, as appropriate to the aircraft type
Maintaining turbine engines on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll develop competence in maintaining aircraft turbine engines by following approved maintenance manuals and change documentation. The unit covers procedures for removing and fitting turbine engine components in accordance with airworthiness requirements.
What you'll be able to do
- Carry out maintenance activities on aircraft turbine engines in accordance with the approved aircraft maintenance manual.
- Carry out maintenance activities on aircraft turbine engines in accordance with approved change documentation (service bulletin).
- Carry out maintenance activities on aircraft turbine engines in accordance with airworthiness requirements.
- Remove turbine engine components as required.
- Fit approved replacements for turbine engine components as appropriate.
- Test and adjust the completed turbine engine system to meet the aircraft maintenance manual requirements.
- Test and adjust the completed turbine engine system to meet change documentation (service bulletin) requirements.
- Test and adjust the completed turbine engine system to meet airworthiness requirements.
Maintaining vacuum systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll learn to maintain aircraft vacuum systems in accordance with maintenance manuals, service bulletins, and airworthiness standards. The unit includes performing maintenance tasks and accurately documenting all activities on fixed wing and rotary wing aircraft.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft vacuum systems, in accordance with the aircraft maintenance manual, approved change documentation (service bulletin) and airworthiness requirements.
- Apply knowledge of both fixed wing and rotary winged aircraft vacuum systems.
- Apply knowledge of the units and components used to generate, deliver and regulate negative air pressure, including pumps, regulators and lines, through to and including the manifold.
- Perform maintenance activities including the removal, fitting and testing of a range of vacuum components.
- Use the approved procedure for correctly isolating and bringing the system to atmospheric pressure before breaking into the system circuit.
- Remove the required components and fit approved replacements, as appropriate.
- Pressurise the system and test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin) and airworthiness requirements.
Maintaining water and waste systems on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit equips learners to maintain aircraft water and waste systems safely and effectively. You'll apply approved maintenance manuals, change documentation, and airworthiness requirements while accurately recording all maintenance activities.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft water and waste systems in accordance with the aircraft maintenance manual, approved change documentation (service bulletin), and airworthiness requirements
- Apply maintenance activities to both fixed wing and rotary winged aircraft water and waste systems
- Identify the units and components which store and deliver fresh water for use, and those fixed components which store and provide a means of removing water and waste
- Perform maintenance activities including the removal, fitting, and testing of a range of water and waste system components, such as wash basins, toilet assemblies, water and waste tanks, valves, and pipes
- Apply the approved procedure for correctly isolating the system before breaking into the system circuit
- Remove required components and fit approved replacements, as appropriate
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation (service bulletin), and airworthiness requirements
Maintaining windows on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
It teaches you to maintain aircraft windows on fixed wing and rotary wing aircraft. You'll follow approved maintenance manuals and change documentation to perform maintenance safely and in compliance with airworthiness requirements.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft windows in accordance with approved aircraft maintenance manuals, change documentation, and airworthiness requirements.
- Apply maintenance activities to both fixed wing and rotary winged aircraft.
- Maintain fuselage and crew compartment windows and windshields, including windows installed in doors.
- Remove, fit, and test a range of windows where appropriate.
- Select the correct tools and equipment based on the operations to be performed and the window equipment to be removed or fitted.
- Maintain aircraft windows including the transparent material and frame of sliding and fixed windows and windshields, frost shields, handles, and latching mechanisms.
- Remove required window components and fit approved replacements.
- Test and adjust the completed system to meet the aircraft maintenance manual, change documentation, and airworthiness requirements.
Maintaining wings on aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
You'll develop competence in maintaining aircraft wings, including removal, fitting, testing, and repair of components. The unit emphasises adherence to safety procedures, maintenance manuals, structural repair manuals, and airworthiness requirements.
What you'll be able to do
- Demonstrate competence in carrying out maintenance activities on aircraft wings in accordance with the approved aircraft maintenance manual, structural repair manual, approved change documentation (service bulletin) and airworthiness requirements
- Perform maintenance activities including the removal, fitting and testing of a range of aircraft wing components
- Make repairs to primary and secondary airframe/wing structures, as appropriate to the aircraft type
Reinstating the work area on completion of activities (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit emphasises the skills needed to ensure that work areas are reinstated and maintained post-activity in aviation environments.
What you'll be able to do
- Ensure a clean and safe work environment after maintenance activities.
Towing, marshalling and parking aircraft (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
Teaches the skills necessary for the safe towing and parking of aircraft.
What you'll be able to do
- Carry out towing and marshalling of aircraft safely and efficiently.
Using and interpreting engineering data and documentation (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit focuses on the skills required to effectively use and interpret engineering documentation relevant to aviation maintenance.
What you'll be able to do
- Interpret various engineering documents and data used in aviation maintenance.
Working efficiently and effectively in advanced manufacturing and engineering (Aviation Maintenance) Real unit · Excellence, Achievement & Learning Limited
This unit covers the practices for maintaining efficiency and effectiveness in manufacturing and engineering environments within aviation.
What you'll be able to do
- Apply principles of efficiency and effectiveness in engineering practices.
03The standards
The national standards these units are built against
What the job actually needs, in the words employers and awarding bodies already use for the work itself.
- Standard
Check and operate aircraft propulsion units, systems and controls
- Standard
Check and operate flight instruments and automatic flight control systems
- Standard
Control aircraft during flight
- Standard
Identify and report continuing airworthiness documentation problems
- Standard
Identify, Interpret and manage the requirements for providing continuing airworthiness certification activities
- Standard
Identify, monitor and resolve aircraft maintenance programme problems
- Standard
Implement approved aircraft maintenance programmes
- Standard
Inspect and maintain aeronautical ground lighting systems
- Standard
Maintain aeronautical ground lighting serviceability
- Standard
Maintain air conditioning and ventilation systems used in food and drink operations
- Standard
Maintain air conditioning and ventilation systems used in food and drink operations
- Standard
Maintaining air conditioning and ventilation systems
- Standard
Manage and monitor automated systems
- Standard
Manage the monitoring of continuing airworthiness compliance with regulatory requirements
- Standard
Monitor Aircraft Fuelling System Performance
- Standard
Work in a continuing airworthiness environment
04Where it leads
The jobs these credits are mapped to
A qualification is never a dead end here. Each of these is a job record this qualification is a mapped route into.
- 2 records
- 1 record
- 1 record
- 1 record
- 1 record
- 1 record
Showing 6 roles, drawn from 10 job records mapped to this qualification. Near-identical records are folded together, and each row says how many it stands for.
Where this can lead
Aviation Compliance Manager
This work can lead to shaping safety culture across an organisation, or to roles that influence industry-wide standards.
See the whole journey05The credits
The credits, and who awards them
Level 3 credits are regulated, and they are awarded by Excellence, Achievement & Learning Limited rather than by Zavmo. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you have covered and what is next.
What you would be collecting
Carrying Out Flight Servicing and Routine Maintenance of Aircraft (Aviation Maintenance)Complying with statutory regulations and organisational safety requirements (Aviation Maintenance)Complying with statutory regulations and organisational safety requirements (Aviation Maintenance)Levelling and weighing aircraft (Aviation Maintenance)Lifting and trestling/shoring aircraft for maintenance/repair operations (Aviation Maintenance)Maintaining air conditioning systems on aircraft (Aviation Maintenance) (ATA 21)Maintaining airborne auxiliary power systems on aircraft (Aviation Maintenance)Maintaining auto flight systems on aircraft (Aviation Maintenance) (ATA 22)
Each one is a real unit registered against this qualification.
How you’d practise it
You don’t watch this. You do it.
You are not assessed on remembering this. You are assessed on applying it, analysing it, evaluating it and producing something. So that is what the practice is: projects, role play and your own live cases, with a tutor in the room.
The Navigator · your what-if tutor Illustration The Navigator Your plan for “Maintaining power plant on aircraft (Aviation Maintenance)” assumes the same two people are free in March. What have you seen that makes you slightly uneasy about that?
You One of them has been pulled onto the migration twice already. Probably fine.
The Navigator That is the thread worth pulling. Let us build the version where it happens a third time and find the move that works either way.
- Bring your own plan Create
For “Maintaining power plant on aircraft (Aviation Maintenance)” you bring the plan you are actually working on, not a case study. Zavmo pulls on the assumptions in it until the weak one shows.
- Draft the real one Create
You do “Maintaining indicating and recording systems on aircraft (Aviation Maintenance) (ATA 31)” on a real document of your own. Zavmo works on the draft you have to send anyway, so the coursework and the job are the same piece of work.
- Map a live decision Analyse
“Maintaining air conditioning systems on aircraft (Aviation Maintenance) (ATA 21)” runs on a decision you are facing now. Zavmo maps it with you and shows what the second-order effect looks like before you find out the slow way.
What you leave holding
The standards this credential builds, in the shape the product keeps them
Nothing here is marked learned. There is no learner on a public page, so the map shows what the qualification covers rather than what anybody has done.
EAL Level 3 Diploma in Aviation Maintenance (Development Competence)
- Check and operate aircraft propulsion units, systems and controls
- Check and operate flight instruments and automatic flight control systems
- Control aircraft during flight
- Identify and report continuing airworthiness documentation problems
- Identify, Interpret and manage the requirements for providing continuing airworthiness certification activities
- Identify, monitor and resolve aircraft maintenance programme problems
- Implement approved aircraft maintenance programmes
- Inspect and maintain aeronautical ground lighting systems
How you would learn this
One to one, on the work you already do
A tutor sets the task against your own job and marks the reasoning, at your pace. There is no cohort to fall behind.
A lesson from Carrying Out Flight Servicing and Routine Maintenance of Aircraft (Aviation Maintenance), one of this qualification's own units.
Applied to your work in any of these jobs
Which job do you mean?
Covers routine servicing tasks and maintenance checks necessary for aircraft operation.
How the thinking builds
- 1 Remember
- 2 Understand
- 3 Apply
- 4 Analyse
- 5 Evaluate
- 6 Create
It is £70 a month, billed monthly. Your free first module is Future Fluency, and you can cancel any time. Teaching towards this qualification begins when you subscribe.
Built for EAL Level 3 Diploma in Aviation Maintenance (Development Competence)
53 units in this credential, in the order it lists them, awarded by Excellence, Achievement & Learning Limited.
- Carrying Out Flight Servicing and Routine Maintenance of Aircraft (Aviation Maintenance)
- Complying with statutory regulations and organisational safety requirements (Aviation Maintenance)
- Levelling and weighing aircraft (Aviation Maintenance)
- Lifting and trestling/shoring aircraft for maintenance/repair operations (Aviation Maintenance)
- Maintaining air conditioning systems on aircraft (Aviation Maintenance) (ATA 21)
- Maintaining airborne auxiliary power systems on aircraft (Aviation Maintenance)
and 47 more in the full unit list below.
Free tools
Want a read on where you stand?
Three free tools, no account needed. Each one ends with a role, a level and a way in.
Learned on your own work, taught one-to-one.
Everything you just read, learned one-to-one on the job you already do. Your free first module is Future Fluency, so you can see how the teaching works before you pay for anything.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.
The title, level, credits, guided learning hours and unit learning outcomes on this page are taken from the Ofqual Register of Regulated Qualifications. Contains public sector information licensed under the Open Government Licence v3.0. Where this data comes from.