How you’d get it
How you’d get this certificate
- Zavmo teaches you. You learn the units one-to-one with an AI tutor, on your own work.
- You register with an approved centre. That is a college, training provider or employer ProQual Awarding Body has approved to offer this qualification. Zavmo is not an approved centre, so you register with them, not with us.
- The centre assesses, and ProQual Awarding Body awards. A qualified assessor at the centre judges your evidence, and the certificate comes from ProQual Awarding Body.
01What it is
The ProQual Level 2 NVQ Certificate in Plant Operations provides a nationally recognized qualification for plant operatives, covering various pathways relating to operational roles.
These are the units ProQual Awarding Body registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated. Zavmo teaches towards them on your own work.
Zavmo is not an awarding body, is not an approved centre, and is not affiliated with ProQual Awarding Body. It does the teaching and the mapping. ProQual Awarding Body sets this qualification and awards it, and a qualified human assessor makes the assessment decision.
02The units
What each unit actually teaches you to do
Conforming to general health, safety and welfare in the workplace Real unit · ProQual Awarding Body
This unit focuses on understanding and complying with health, safety, and welfare regulations relevant to the workplace.
What you'll be able to do
- Comply with all workplace health, safety and welfare legislation requirements.
- Recognise hazards associated with the workplace.
- Contribute to workplace health, safety and welfare.
Conforming to productive working practices in the workplace Real unit · ProQual Awarding Body
This unit focuses on maintaining productivity and effective communication with others in the workplace.
What you'll be able to do
- Communicate with others to establish productive work practices.
- Follow organisational procedures to plan the sequence of work.
Controlling, Directing and Guiding the Operation of Plant or Machinery in the Workplace Real unit · ProQual Awarding Body
You'll learn to control, direct, and guide the operation of plant or machinery. The unit covers interpreting site plans, hand signals, risk assessments, organising operations with others, and compliance with relevant legislation and guidance.
What you'll be able to do
- Interpret information relating to controlling, directing and guiding the operation of plant or machinery.
- Organise with others the sequence and operation in which directing and guiding operations are to be carried out.
- Explain how to comply with relevant legislation and official guidance when carrying out controlling, directing and guiding operations of plant or machinery.
- Maintain safe and healthy working practices when controlling, directing and guiding the operation of plant and machinery.
- Select the required quantity and quality of resources to direct and guide the operation of plant and machinery.
- Minimise the risk of damage to the work and surrounding area when controlling, directing and guiding the operation of plant and machinery.
- Complete the work within the allocated time when controlling, directing and guiding the operation of plant and machinery.
- Comply with the given contract information to control, direct and guide the operation of plant or machinery to the required specification.
Moving, handling and storing resources in the workplace Real unit · ProQual Awarding Body
It teaches you to move, handle, and store resources safely in the workplace. It covers compliance with relevant legislation and guidance, safe manual handling techniques, selection of appropriate quantities, and maintaining safe working practices.
What you'll be able to do
- Comply with given information when moving, handling and/or storing resources
- Comply with relevant legislation and official guidance when moving, handling and/or storing resources
- Maintain safe working practices when moving, handling and/or storing resources
- Select the required quantity and quality of resources for the methods of work to move, handle and/or store occupational resources
- Prevent the risk of damage to occupational resources and surrounding environment when moving, handling and/or storing resources
- Complete the work within the allocated time when moving, handling and/or storing resources
- Comply with the given occupational resource information to move, handle and/or store resources to the required guidance
Operating plant or machinery for non-operational activities in the workplace Real unit · ProQual Awarding Body
You'll identify various plant and machinery used for non-operational activities such as maintenance and cleaning. The unit covers safety legislation, preparation, and safe operation to ensure effective use of equipment in non-operational workplace tasks.
What you'll be able to do
- Identify different types of plant or machinery used for non-operational activities
- Describe the safety requirements for operating plant or machinery for non-operational activities
- Prepare plant or machinery for non-operational activities
- Operate plant or machinery safely and effectively for non-operational activities
- Monitor the performance of the plant or machinery during operation
- Respond to problems or faults that may occur during operation
- Carry out post-operational checks and procedures on the plant or machinery
Preparing and operating batching plant to process materials in the workplace Real unit · ProQual Awarding Body
This unit focuses on preparing and operating batching plants to process materials safely and effectively. You'll perform pre-start checks, operate the plant according to specifications, identify suitable materials, and comply with organisational procedures.
What you'll be able to do
- Describe the procedures for preparing batching plant for processing materials in the workplace
- Operate batching plant safely and effectively to process materials in the workplace
- Identify different types of materials suitable for processing using batching plant
- Follow organisational procedures for maintaining batching plant in the workplace
- Comply with relevant health and safety regulations when operating batching plant in the workplace
Preparing and operating binder spreaders to lay and distribute materials in the workplace Real unit · ProQual Awarding Body
It teaches you to prepare and operate binder spreaders for laying and distributing materials. It covers pre-start checks, safety precautions, hazard identification, emergency procedures, and adherence to site plans and instructions for effective operation.
What you'll be able to do
- Describe the procedures for preparing binder spreaders for laying and distributing materials in the workplace
- Identify and explain the safety precautions required when operating binder spreaders
- Operate binder spreaders safely and effectively to lay and distribute materials in the workplace
- Describe the different types of materials that can be laid and distributed using binder spreaders
- Explain the importance of following site plans and instructions when laying and distributing materials
- Carry out routine maintenance and checks on binder spreaders
- Describe the procedures for shutting down and securing binder spreaders after use
- Explain how to recognise and respond to potential hazards during laying and distributing activities
Preparing and operating boom-type mobile elevating work platforms, MEWP, in the workplace Real unit · ProQual Awarding Body
It teaches you to prepare and safely operate boom-type mobile elevating work platforms (MEWP). You'll conduct pre-use checks, identify hazards, and apply correct operational techniques while adhering to safety regulations in the workplace.
What you'll be able to do
- Prepare boom-type mobile elevating work platforms (MEWP) for operation in the workplace
- Operate boom-type mobile elevating work platforms (MEWP) safely in the workplace
- Identify and respond to potential hazards associated with operating boom-type mobile elevating work platforms (MEWP)
- Carry out pre-use checks on boom-type mobile elevating work platforms (MEWP)
- Position boom-type mobile elevating work platforms (MEWP) for effective work
- Adhere to relevant health and safety regulations when operating boom-type mobile elevating work platforms (MEWP)
- Store boom-type mobile elevating work platforms (MEWP) correctly after use
Preparing and operating compact cranes to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
This unit covers the skills and knowledge required to prepare and operate compact cranes for lifting and transferring loads.
What you'll be able to do
- Interpret information for operating compact cranes.
- Maintain safe and healthy working practices when using compact cranes.
Preparing and operating container handlers to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll develop the knowledge and skills to prepare and operate container handlers safely for lifting and transferring loads. The unit covers pre-start checks, safe operation, hazard recognition, and adherence to manufacturer and site safety procedures.
What you'll be able to do
- Describe the procedures for preparing container handlers to lift and transfer loads in the workplace
- Operate container handlers safely and effectively to lift and transfer loads in the workplace
- Identify and respond to potential hazards when operating container handlers to lift and transfer loads in the workplace
- Follow organisational procedures for reporting faults or issues with container handlers used to lift and transfer loads in the workplace
- Adhere to health and safety regulations when lifting and transferring loads using container handlers
Preparing and operating crushers to process materials in the workplace Real unit · ProQual Awarding Body
You'll study the purpose, function, and components of crushers, alongside safety requirements and guarding devices. The unit teaches you to prepare, operate, and maintain crushers safely and effectively to process materials in the workplace.
What you'll be able to do
- Describe the purpose and function of crushers in the workplace
- Explain the safety precautions required when preparing and operating crushers
- Prepare a crusher for operation according to manufacturer's instructions and workplace procedures
- Operate a crusher to process materials safely and effectively
- Monitor the performance of the crusher during operation
- Respond appropriately to faults or malfunctions during operation
- Secure and shut down the crusher according to manufacturer's instructions and workplace procedures
Preparing and operating ergonomic manipulating machines to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll understand ergonomic principles and their importance in reducing workplace injury. The unit covers safety requirements and pre-use checks for ergonomic manipulating machines, and you'll learn to prepare and operate these machines safely and efficiently.
What you'll be able to do
- Describe the principles of ergonomics in the workplace
- Identify the safety requirements for operating ergonomic manipulating machines
- Prepare an ergonomic manipulating machine for lifting and transferring loads
- Operate an ergonomic manipulating machine to lift and transfer loads safely and efficiently
- Monitor the performance of the ergonomic manipulating machine during operation
- Respond to problems or faults that may occur during operation
- Carry out post-operational checks and procedures on the ergonomic manipulating machine
Preparing and operating excavator cranes to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll learn to prepare and operate excavator cranes safely for lifting and transferring loads. The unit includes performing pre-start checks, following manufacturer instructions, safe lifting practices, hazard identification, and effective load handling.
What you'll be able to do
- Describe the procedures for preparing excavator cranes to lift and transfer loads in the workplace
- Operate excavator cranes safely and effectively to lift and transfer loads in the workplace
- Identify and respond to potential hazards when operating excavator cranes to lift and transfer loads in the workplace
- Follow organisational procedures for reporting faults or issues with excavator cranes used to lift and transfer loads in the workplace
- Adhere to health and safety regulations when lifting and transferring loads using excavator cranes
Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace Real unit · ProQual Awarding Body
It teaches you to prepare and operate forward tipping dumpers for receiving, transporting, and discharging materials. It includes pre-start checks, safe operating techniques, hazard identification, and manoeuvring on uneven terrain in accordance with safety regulations.
What you'll be able to do
- Describe the procedures for preparing a forward tipping dumper for receiving, transporting and discharging materials.
- Demonstrate the correct operating techniques for a forward tipping dumper.
- Identify potential hazards associated with operating a forward tipping dumper in the workplace.
- Explain the importance of following safety regulations when operating a forward tipping dumper.
- Describe the procedures for receiving, transporting and discharging materials using a forward tipping dumper.
- Explain how to carry out routine checks and maintenance on a forward tipping dumper.
- Describe the procedures for parking and securing a forward tipping dumper.
Preparing and operating hoists to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll learn to prepare and operate hoists safely for lifting and transferring loads. The unit includes pre-operational checks, safe lifting techniques, hazard identification, adherence to safety procedures, and effective communication during operations.
What you'll be able to do
- Describe the procedures for preparing hoists for lifting and transferring loads in the workplace
- Demonstrate the safe and effective operation of hoists to lift and transfer loads in the workplace
- Identify potential hazards and risks associated with operating hoists in the workplace
- Apply relevant health and safety regulations and guidelines when operating hoists
- Explain the importance of conducting pre-operational checks on hoists
- Describe the procedures for securing and transferring loads using hoists
- Explain the importance of effective communication during lifting and transferring operations using hoists
- Describe the procedures for safely parking and securing hoists after use
Preparing and operating industrial forklift trucks to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
This unit provides learners with the knowledge to prepare and operate industrial forklift trucks safely for lifting and transferring loads. It includes pre-start checks, hazard identification, safe operating techniques, and adherence to load capacity and safety regulations.
What you'll be able to do
- Describe the procedures for preparing an industrial forklift truck for lifting and transferring loads.
- Demonstrate the correct operating techniques for an industrial forklift truck.
- Identify potential hazards associated with operating an industrial forklift truck in the workplace.
- Explain the importance of following safety regulations when operating an industrial forklift truck.
- Describe the procedures for lifting and transferring loads using an industrial forklift truck.
- Explain how to carry out routine checks and maintenance on an industrial forklift truck.
- Describe the procedures for parking and securing an industrial forklift truck.
Preparing and operating landfill compactors to compact materials in the workplace Real unit · ProQual Awarding Body
This unit covers the preparation, operation, and maintenance of landfill compactors for compacting materials safely and effectively. You'll perform pre-start checks, monitor machine performance, identify hazards, and follow manufacturer and workplace procedures.
What you'll be able to do
- Prepare landfill compactors for operation in accordance with manufacturer's instructions and workplace procedures.
- Operate landfill compactors safely and effectively to compact materials in the designated area.
- Monitor the performance of the landfill compactor during operation and identify any potential issues.
- Compact materials to the required density and levels, following site specifications.
- Carry out routine maintenance and checks on the landfill compactor.
- Shut down and secure the landfill compactor according to workplace procedures.
Preparing and operating loader compressors to extract loose materials in the workplace Real unit · ProQual Awarding Body
You'll learn to prepare and operate loader compressors safely for extracting loose materials. The unit covers pre-start checks, interpreting manufacturer guidance, safe operation, efficient manoeuvring, and hazard identification and mitigation.
What you'll be able to do
- Prepare loader compressors for operation in accordance with manufacturer's instructions and workplace procedures.
- Operate loader compressors safely and effectively to extract loose materials from the designated area.
- Manoeuvre the loader compressor to access and extract loose materials efficiently.
- Load and transport loose materials to the designated location, following site specifications.
- Monitor the performance of the loader compressor during operation and identify any potential issues.
- Carry out routine maintenance and checks on the loader compressor.
- Shut down and secure the loader compressor according to workplace procedures.
Preparing and operating lorry loaders or knuckle booms to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll gain knowledge and skills to prepare and operate lorry loaders or knuckle booms safely for lifting and transferring loads. The unit includes pre-operational checks, safe lifting techniques, load placement, hazard identification, and effective communication.
What you'll be able to do
- Describe the procedures for preparing lorry loaders or knuckle booms for lifting and transferring loads in the workplace
- Demonstrate the safe and effective operation of lorry loaders or knuckle booms to lift and transfer loads in the workplace
- Identify potential hazards and risks associated with operating lorry loaders or knuckle booms in the workplace
- Apply relevant health and safety regulations and guidelines when operating lorry loaders or knuckle booms
- Explain the importance of conducting pre-operational checks on lorry loaders or knuckle booms
- Describe the procedures for securing and transferring loads using lorry loaders or knuckle booms
- Explain the importance of effective communication during lifting and transferring operations
- Describe the procedures for safely parking and securing lorry loaders or knuckle booms after use
Preparing and operating mast climber-type mobile elevating work platforms, MEWP, in the workplace Real unit · ProQual Awarding Body
You'll develop the skills to prepare and operate mast climber-type mobile elevating work platforms (MEWP) safely in the workplace. The unit covers pre-start checks, safe operation at various heights, hazard identification, and adherence to safety protocols.
What you'll be able to do
- Describe the procedures for preparing mast climber-type mobile elevating work platforms (MEWP) for operation in the workplace
- Operate mast climber-type mobile elevating work platforms (MEWP) safely and effectively in the workplace
- Identify potential hazards associated with operating mast climber-type mobile elevating work platforms (MEWP) in the workplace
- Follow organisational procedures for maintaining mast climber-type mobile elevating work platforms (MEWP) in the workplace
- Comply with relevant health and safety regulations when operating mast climber-type mobile elevating work platforms (MEWP) in the workplace
Preparing and operating overhead cranes to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
This unit provides learners with the skills to prepare and operate overhead cranes for lifting and transferring loads. It covers relevant safety legislation, pre-operational checks, emergency procedures, and hazard management to promote safe crane operation in the workplace.
What you'll be able to do
- Describe the safety procedures for preparing and operating overhead cranes in the workplace
- Prepare an overhead crane for lifting and transferring loads in accordance with manufacturer's instructions and workplace procedures
- Operate an overhead crane safely and efficiently to lift and transfer loads in the workplace
- Identify potential hazards and risks associated with operating overhead cranes and implement appropriate control measures
- Carry out routine checks and maintenance on overhead cranes
- Comply with relevant legislation and regulations when operating overhead cranes
Preparing and operating pedestrian operated tower cranes to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll be able to prepare and operate pedestrian operated tower cranes for lifting and transferring loads safely. The unit includes pre-start checks, safety precautions, hazard identification, emergency procedures, and compliance with lifting plans and workplace requirements.
What you'll be able to do
- Describe the procedures for preparing pedestrian operated tower cranes for lifting and transferring loads in the workplace
- Identify and explain the safety precautions required when operating pedestrian operated tower cranes
- Operate pedestrian operated tower cranes safely and effectively to lift and transfer loads in the workplace
- Describe the different types of loads that can be lifted and transferred using pedestrian operated tower cranes
- Explain the importance of following lifting plans and instructions when lifting and transferring loads
- Carry out routine maintenance and checks on pedestrian operated tower cranes
- Describe the procedures for shutting down and securing pedestrian operated tower cranes after use
- Explain how to recognise and respond to potential hazards during lifting and transferring activities
Preparing and operating plant or machinery attachments in the workplace Real unit · ProQual Awarding Body
This unit covers the preparation and safe operation of plant or machinery attachments. You'll perform pre-operational checks, operate attachments effectively, identify hazards, and comply with site-specific safety procedures and manufacturer instructions.
What you'll be able to do
- Describe the procedures for preparing plant or machinery attachments for operation in the workplace
- Demonstrate the safe and effective operation of plant or machinery attachments in the workplace
- Identify potential hazards and risks associated with operating plant or machinery attachments in the workplace
- Apply relevant health and safety regulations and guidelines when operating plant or machinery attachments
- Explain the importance of conducting pre-operational checks on plant or machinery attachments
- Describe the procedures for attaching and detaching plant or machinery attachments
- Explain the importance of effective communication during operation of plant or machinery attachments
- Describe the procedures for safely parking and securing plant or machinery attachments after use
Preparing and operating plant or machinery to sweep, clean or clear in the workplace Real unit · ProQual Awarding Body
You'll gain knowledge and skills to prepare and operate plant or machinery for sweeping, cleaning, or clearing tasks safely and effectively. The unit includes pre-start checks, safe operating practices, hazard identification, and following organisational procedures.
What you'll be able to do
- Describe the procedures for preparing plant or machinery to sweep, clean or clear in the workplace
- Operate plant or machinery safely and effectively to sweep, clean or clear in the workplace
- Identify and respond to potential hazards when operating plant or machinery to sweep, clean or clear in the workplace
- Follow organisational procedures for reporting faults or issues with plant or machinery used to sweep, clean or clear in the workplace
- Adhere to health and safety regulations when sweeping, cleaning or clearing in the workplace
Preparing and operating reach trucks to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll learn to safely prepare and operate reach trucks for lifting and transferring loads. The unit covers health and safety legislation, pre-operational checks, emergency procedures, and safe operational techniques in accordance with manufacturer and workplace guidelines.
What you'll be able to do
- Describe the safety procedures for preparing and operating reach trucks in the workplace
- Prepare a reach truck for lifting and transferring loads in accordance with manufacturer's instructions and workplace procedures
- Operate a reach truck safely and efficiently to lift and transfer loads in the workplace
- Identify potential hazards and risks associated with operating reach trucks and implement appropriate control measures
- Carry out routine checks and maintenance on reach trucks
- Comply with relevant legislation and regulations when operating reach trucks
Preparing and operating rear tipping dump trucks to receive, transport and discharge materials in the workplace Real unit · ProQual Awarding Body
This unit equips learners to prepare and operate rear tipping dump trucks for receiving, transporting, and discharging materials. It covers pre-start checks, safety precautions, hazard identification, emergency procedures, and adherence to site procedures and instructions.
What you'll be able to do
- Describe the procedures for preparing rear tipping dump trucks for receiving, transporting, and discharging materials in the workplace
- Identify and explain the safety precautions required when operating rear tipping dump trucks
- Operate rear tipping dump trucks safely and effectively to receive, transport, and discharge materials in the workplace
- Describe the different types of materials that can be received, transported, and discharged using rear tipping dump trucks
- Explain the importance of following site plans and instructions when receiving, transporting, and discharging materials
- Carry out routine maintenance and checks on rear tipping dump trucks
- Describe the procedures for shutting down and securing rear tipping dump trucks after use
- Explain how to recognise and respond to potential hazards during receiving, transporting, and discharging activities
Preparing and operating ride-on rollers to compact materials in the workplace Real unit · ProQual Awarding Body
This unit covers the preparation and safe operation of ride-on rollers for compacting materials in the workplace. You'll develop skills in performing pre-start checks, operating the machinery effectively, identifying suitable materials for compaction, and following organisational maintenance procedures.
What you'll be able to do
- Describe the procedures for preparing ride-on rollers for operation in the workplace
- Operate ride-on rollers safely and effectively to compact materials in the workplace
- Identify different types of materials suitable for compaction using ride-on rollers
- Follow organisational procedures for maintaining ride-on rollers in the workplace
- Comply with relevant health and safety regulations when operating ride-on rollers in the workplace
Preparing and operating road/rail adapted plant in the workplace Real unit · ProQual Awarding Body
You'll learn to prepare and operate road/rail adapted plant safely and effectively. The unit includes pre-start checks, control functions, safety devices, personal protective equipment, safe operating techniques, hazard identification, and organisational procedures.
What you'll be able to do
- Describe the procedures for preparing road/rail adapted plant for operation in the workplace
- Operate road/rail adapted plant safely and effectively in the workplace
- Identify potential hazards associated with operating road/rail adapted plant in the workplace
- Follow organisational procedures for maintaining road/rail adapted plant in the workplace
- Comply with relevant health and safety regulations when operating road/rail adapted plant in the workplace
Preparing and operating rough terrain masted forklifts to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
This unit develops learners' ability to prepare and operate rough terrain masted forklifts for lifting and transferring loads. It covers pre-start checks, safe steering and operating techniques, hazard identification, and the use of personal protective equipment.
What you'll be able to do
- Describe the procedures for preparing a rough terrain masted forklift for lifting and transferring loads.
- Demonstrate the correct operating techniques for a rough terrain masted forklift.
- Identify potential hazards associated with operating a rough terrain masted forklift in the workplace.
- Explain the importance of following safety regulations when operating a rough terrain masted forklift.
- Describe the procedures for lifting and transferring loads using a rough terrain masted forklift.
- Explain how to carry out routine checks and maintenance on a rough terrain masted forklift.
- Describe the procedures for parking and securing a rough terrain masted forklift.
Preparing and operating scissor-type mobile elevating work platforms, MEWP, in the workplace Real unit · ProQual Awarding Body
This unit provides learners with the skills to prepare and safely operate scissor-type mobile elevating work platforms (MEWP). It covers pre-start checks, control functions, hazard recognition, and safe positioning and operation in various environmental conditions.
What you'll be able to do
- Prepare scissor-type mobile elevating work platforms (MEWP) for operation in the workplace
- Operate scissor-type mobile elevating work platforms (MEWP) safely in the workplace
- Identify and respond to potential hazards associated with operating scissor-type mobile elevating work platforms (MEWP)
- Carry out pre-use checks on scissor-type mobile elevating work platforms (MEWP)
- Position scissor-type mobile elevating work platforms (MEWP) for effective work
- Adhere to relevant health and safety regulations when operating scissor-type mobile elevating work platforms (MEWP)
- Store scissor-type mobile elevating work platforms (MEWP) correctly after use
Preparing and operating screeners to process materials in the workplace Real unit · ProQual Awarding Body
You'll gain knowledge and skills to prepare and operate screeners for processing materials. The unit covers safety legislation, pre-operational checks, emergency procedures, and hazard identification to ensure safe and efficient screener operation.
What you'll be able to do
- Describe the safety procedures for preparing and operating screeners in the workplace
- Prepare a screener for processing materials in accordance with manufacturer's instructions and workplace procedures
- Operate a screener safely and efficiently to process materials in the workplace
- Identify potential hazards and risks associated with operating screeners and implement appropriate control measures
- Carry out routine checks and maintenance on screeners
- Comply with relevant legislation and regulations when operating screeners
Preparing and operating self-propelled bowsers to receive, transport and discharge materials in the workplace Real unit · ProQual Awarding Body
This unit covers the preparation and operation of self-propelled bowsers for receiving, transporting, and discharging materials. You'll understand safety precautions, pre-start checks, and procedures to operate bowsers safely and effectively in the workplace.
What you'll be able to do
- Describe the procedures for preparing self-propelled bowsers for receiving, transporting and discharging materials in the workplace
- Explain the safety precautions required when operating self-propelled bowsers
- Operate self-propelled bowsers to receive, transport and discharge materials in accordance with workplace procedures
- Identify potential hazards and risks associated with operating self-propelled bowsers
- Describe the procedures for carrying out routine checks and maintenance on self-propelled bowsers
- Record and report any defects or issues identified during operation or maintenance of self-propelled bowsers
Preparing and operating self-propelled modular transporters, SPMT, to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
This unit equips learners with the skills to prepare and operate self-propelled modular transporters (SPMT) safely for lifting and transferring loads. You'll perform pre-start checks, apply safe lifting techniques, identify hazards, and comply with safety requirements.
What you'll be able to do
- Describe the procedures for preparing self-propelled modular transporters (SPMT) to lift and transfer loads in the workplace
- Operate self-propelled modular transporters (SPMT) safely and effectively to lift and transfer loads in the workplace
- Identify and respond to potential hazards when operating self-propelled modular transporters (SPMT) to lift and transfer loads in the workplace
- Follow organisational procedures for reporting faults or issues with self-propelled modular transporters (SPMT) used to lift and transfer loads in the workplace
- Adhere to health and safety regulations when lifting and transferring loads using self-propelled modular transporters (SPMT)
Preparing and operating self-propelled spreaders to lay and distribute materials in the workplace Real unit · ProQual Awarding Body
This unit provides learners with the skills to prepare and operate self-propelled spreaders for laying and distributing materials evenly. You'll perform pre-start checks, adjust spreader settings, monitor distribution rates, and maintain safe operating practices.
What you'll be able to do
- Prepare self-propelled spreaders for operation in accordance with manufacturer's instructions and workplace procedures.
- Operate self-propelled spreaders safely and effectively to lay and distribute materials evenly.
- Adjust the spreader settings to achieve the required material distribution rate and pattern.
- Monitor the material distribution process to ensure consistent and accurate application.
- Maintain a consistent speed and path while operating the spreader to achieve uniform coverage.
- Carry out routine maintenance and checks on the self-propelled spreader.
- Shut down and secure the self-propelled spreader according to workplace procedures.
Preparing and operating sideloader forklifts to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll gain knowledge and skills to prepare and operate sideloader forklifts safely for lifting and transferring loads. The unit covers pre-operational checks, safe operating techniques, accurate load placement, hazard identification, and effective communication.
What you'll be able to do
- Describe the procedures for preparing sideloader forklifts for lifting and transferring loads in the workplace
- Demonstrate the safe and effective operation of sideloader forklifts to lift and transfer loads in the workplace
- Identify potential hazards and risks associated with operating sideloader forklifts in the workplace
- Apply relevant health and safety regulations and guidelines when operating sideloader forklifts
- Explain the importance of conducting pre-operational checks on sideloader forklifts
- Describe the procedures for securing and transferring loads using sideloader forklifts
- Explain the importance of effective communication during lifting and transferring operations
- Describe the procedures for safely parking and securing sideloader forklifts after use
Preparing and operating skid steer loaders to excavate in the workplace Real unit · ProQual Awarding Body
This unit equips learners to prepare and operate skid steer loaders for excavation tasks. It includes safety procedures, pre-operational checks, emergency protocols, and safe operation to manage excavation activities effectively in the workplace.
What you'll be able to do
- Describe the safety procedures for preparing and operating skid steer loaders in the workplace
- Prepare a skid steer loader for excavating in accordance with manufacturer's instructions and workplace procedures
- Operate a skid steer loader safely and efficiently to excavate materials in the workplace
- Identify potential hazards and risks associated with operating skid steer loaders and implement appropriate control measures
- Carry out routine checks and maintenance on skid steer loaders
- Comply with relevant legislation and regulations when operating skid steer loaders
Preparing and operating skid steer loaders to extract loose materials in the workplace Real unit · ProQual Awarding Body
It teaches you to prepare and operate skid steer loaders safely to extract loose materials. You'll perform pre-start checks, interpret manufacturer instructions, manoeuvre the machinery efficiently, and identify and mitigate potential hazards.
What you'll be able to do
- Prepare skid steer loaders for operation in accordance with manufacturer's instructions and workplace procedures.
- Operate skid steer loaders safely and effectively to extract loose materials from the designated area.
- Manoeuvre the skid steer loader to access and extract loose materials efficiently.
- Load and transport loose materials to the designated location, following site specifications.
- Monitor the performance of the skid steer loader during operation and identify any potential issues.
- Carry out routine maintenance and checks on the skid steer loader.
- Shut down and secure the skid steer loader according to workplace procedures.
Preparing and operating skip handlers to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll gain knowledge of preparing and operating skip handlers, including pre-start checks, load securing, and safe operation procedures. The unit focuses on hazard identification, risk assessment, and compliance with workplace safety standards.
What you'll be able to do
- Describe the procedures for preparing skip handlers for lifting and transferring loads in the workplace
- Explain the safety precautions required when operating skip handlers
- Operate skip handlers to lift and transfer loads in accordance with workplace procedures
- Identify potential hazards and risks associated with operating skip handlers
- Describe the procedures for carrying out routine checks and maintenance on skip handlers
- Record and report any defects or issues identified during operation or maintenance of skip handlers
Preparing and operating soil compactors to compact materials in the workplace Real unit · ProQual Awarding Body
You'll gain skills to prepare and operate soil compactors for material compaction. The unit covers pre-start checks, safe operating techniques, hazard identification, and the importance of following safety regulations and maintenance procedures.
What you'll be able to do
- Describe the procedures for preparing a soil compactor for compacting materials.
- Demonstrate the correct operating techniques for a soil compactor.
- Identify potential hazards associated with operating a soil compactor in the workplace.
- Explain the importance of following safety regulations when operating a soil compactor.
- Describe the procedures for compacting materials using a soil compactor.
- Explain how to carry out routine checks and maintenance on a soil compactor.
- Describe the procedures for parking and securing a soil compactor.
Preparing and operating static concrete placing booms to discharge and place materials in the workplace Real unit · ProQual Awarding Body
This unit covers the purpose, function, and main components of static concrete placing booms. You'll gain knowledge of safety precautions, pre-start checks, and operational procedures to prepare and operate these booms safely in the workplace.
What you'll be able to do
- Describe the purpose and function of static concrete placing booms in the workplace
- Explain the safety precautions required when preparing and operating static concrete placing booms
- Prepare a static concrete placing boom for operation according to manufacturer's instructions and workplace procedures
- Operate a static concrete placing boom to discharge and place materials safely and effectively
- Monitor the performance of the static concrete placing boom during operation
- Respond appropriately to faults or malfunctions during operation
- Secure and shut down the static concrete placing boom according to manufacturer's instructions and workplace procedures
Preparing and operating towed scrapers to lay and distribute materials in the workplace Real unit · ProQual Awarding Body
You'll be able to safely prepare and operate towed scrapers for laying and distributing materials. The unit includes safety procedures, pre-operational checks, emergency responses, and hazard identification to ensure efficient and safe scraper operation.
What you'll be able to do
- Describe the safety procedures for preparing and operating towed scrapers in the workplace
- Prepare a towed scraper for laying and distributing materials in accordance with manufacturer's instructions and workplace procedures
- Operate a towed scraper safely and efficiently to lay and distribute materials in the workplace
- Identify potential hazards and risks associated with operating towed scrapers and implement appropriate control measures
- Carry out routine checks and maintenance on towed scrapers
- Comply with relevant legislation and regulations when operating towed scrapers
Preparing and operating tractors with towed equipment for non-agricultural activities in the workplace Real unit · ProQual Awarding Body
This unit equips learners with knowledge of tractors with towed equipment used in non-agricultural activities. You'll understand safety precautions, pre-start checks, and operational procedures to prepare, operate, and maintain these machines safely in the workplace.
What you'll be able to do
- Describe the purpose and function of tractors with towed equipment in non-agricultural activities
- Explain the safety precautions required when preparing and operating tractors with towed equipment
- Prepare a tractor with towed equipment for operation according to manufacturer's instructions and workplace procedures
- Operate a tractor with towed equipment safely and effectively for non-agricultural activities
- Monitor the performance of the tractor and towed equipment during operation
- Respond appropriately to faults or malfunctions during operation
- Secure and shut down the tractor and towed equipment according to manufacturer's instructions and workplace procedures
Preparing and operating trailer-mounted concrete pumps to receive, pump and discharge materials in the workplace Real unit · ProQual Awarding Body
It teaches you to prepare and operate trailer-mounted concrete pumps for receiving, pumping, and discharging materials. It includes understanding the equipment's components, hydraulic functions, safety requirements, and operational procedures to ensure safe and efficient use.
What you'll be able to do
- Describe the features and functions of a trailer-mounted concrete pump
- Identify the safety requirements for operating trailer-mounted concrete pumps
- Prepare a trailer-mounted concrete pump for receiving, pumping and discharging materials
- Operate a trailer-mounted concrete pump to receive, pump and discharge materials safely and efficiently
- Monitor the performance of the concrete pump during operation
- Respond to problems or faults that may occur during operation
- Carry out post-operational checks and procedures on the trailer-mounted concrete pump
Preparing and operating volumetric trucks to receive and transport materials in the workplace Real unit · ProQual Awarding Body
It teaches you to prepare and operate volumetric trucks safely for receiving and transporting materials. You'll perform pre-operational checks, apply safe operating techniques, dispense materials accurately, and follow site-specific safety procedures.
What you'll be able to do
- Describe the procedures for preparing volumetric trucks for receiving and transporting materials in the workplace
- Demonstrate the safe and effective operation of volumetric trucks to receive and transport materials in the workplace
- Identify potential hazards and risks associated with operating volumetric trucks in the workplace
- Apply relevant health and safety regulations and guidelines when operating volumetric trucks
- Explain the importance of conducting pre-operational checks on volumetric trucks
- Describe the procedures for receiving and loading materials onto volumetric trucks
- Explain the importance of effective communication during receiving and transporting operations
- Describe the procedures for safely parking and securing volumetric trucks after use
Preparing and operating wheeled loading shovels to excavate in the workplace Real unit · ProQual Awarding Body
This unit covers the preparation and operation of wheeled loading shovels for excavation activities. You'll understand safety precautions, pre-start checks, hazard identification, emergency procedures, and effective operation in line with site plans and instructions.
What you'll be able to do
- Describe the procedures for preparing wheeled loading shovels for excavation activities in the workplace
- Identify and explain the safety precautions required when operating wheeled loading shovels for excavation
- Operate wheeled loading shovels safely and effectively to excavate materials in the workplace
- Describe the different types of materials that can be excavated using wheeled loading shovels
- Explain the importance of following site plans and instructions when excavating
- Carry out routine maintenance and checks on wheeled loading shovels
- Describe the procedures for shutting down and securing wheeled loading shovels after use
- Explain how to recognise and respond to potential hazards during excavation activities
Preparing and operating wheeled loading shovels to extract loose materials in the workplace Real unit · ProQual Awarding Body
This unit covers the preparation and operation of wheeled loading shovels for extracting loose materials. You'll understand the equipment's main components, hydraulic system functions, safety requirements, and operational procedures to manoeuvre and extract materials efficiently and safely.
What you'll be able to do
- Describe the features and functions of a wheeled loading shovel
- Identify the safety requirements for operating wheeled loading shovels
- Prepare a wheeled loading shovel for extracting loose materials
- Operate a wheeled loading shovel to extract loose materials safely and efficiently
- Manoeuvre the wheeled loading shovel in confined spaces
- Monitor the performance of the wheeled loading shovel during operation
- Respond to problems or faults that may occur during operation
- Carry out post-operational checks and procedures on the wheeled loading shovel
Preparing and operting telescopic handlers to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll gain knowledge and skills to prepare and operate telescopic handlers safely for lifting and transferring loads. The unit includes performing pre-start checks, manoeuvring the handler, handling different load types, and adhering to health and safety requirements.
What you'll be able to do
- Describe the procedures for preparing telescopic handlers for lifting and transferring loads in the workplace
- Operate telescopic handlers safely and effectively to lift and transfer loads in the workplace
- Identify different types of loads suitable for lifting and transferring using telescopic handlers
- Follow organisational procedures for maintaining telescopic handlers in the workplace
- Comply with relevant health and safety regulations when operating telescopic handlers in the workplace
Preparing for, and arranging and securing plant or machinery for transportation in the workplace Real unit · ProQual Awarding Body
You'll gain skills to assess, prepare, and secure plant or machinery for transportation within the workplace. The unit includes evaluating equipment characteristics, selecting transportation methods, coordinating logistics, and ensuring safe and secure movement.
What you'll be able to do
- Assess the plant or machinery to be transported, identifying its characteristics and any specific requirements.
- Prepare the plant or machinery for transportation, ensuring it is safe and secure.
- Select appropriate transportation methods and equipment based on the plant or machinery's characteristics and site conditions.
- Arrange the transportation of the plant or machinery, coordinating with relevant personnel and organisations.
- Secure the plant or machinery for transportation, using appropriate methods and equipment to prevent movement or damage.
- Comply with relevant health and safety regulations and industry best practices throughout the transportation process.
Preparing to and Directing and Guiding the Movement of Vehicles, Plant or Machinery in the Workplace Real unit · ProQual Awarding Body
You'll develop knowledge and skills to prepare for and direct the movement of vehicles, plant, or machinery safely. The unit includes interpreting site plans, organising operations, communication methods, and compliance with relevant legislation and guidance.
What you'll be able to do
- Interpret information relating to preparing for, directing, and guiding the movement of vehicles, plant, or machinery
- Organise the sequence of operations for directing and guiding the movement of vehicles, plant, or machinery with others
- Explain relevant legislation and official guidance when directing and guiding the movement of vehicles, plant, or machinery
- Maintain safe and healthy working practices when preparing for, directing, and guiding the movement of vehicles, plant, or machinery
- Select the required quantity and quality of resources to prepare for, and direct and guide the movement of vehicles, plant, or machinery
- Minimise the risk of damage to the work and surrounding area when preparing for and directing and guiding the movement of vehicles, plant, or machinery
- Complete the work within the allocated time when preparing for, and directing and guiding the movement of vehicles, plant, or machinery
- Comply with the given contract information to prepare for, and direct and guide the movement of vehicles, plant, or machinery to the required specification
Setting Out Secondary Dimensional Work Control in the Workplace Real unit · ProQual Awarding Body
You'll interpret documentation and apply relevant legislation and guidance to set out secondary dimensional work control. The unit emphasises safe working practices and resource selection to ensure accuracy and compliance in construction projects.
What you'll be able to do
- Interpret information relating to setting out dimensional control of the work
- Demonstrate knowledge of relevant legislation and official guidance for setting out dimensional control of the work
- Apply safe and healthy working practices when setting out dimensional control of the work
- Select the required quantity and quality of resources to set out dimensional control of the work
- Minimise the risk of damage to the work and surrounding area when setting out dimensional control of the work
- Complete the work within the allocated time when setting out dimensional control of the work
- Comply with the given contract information to set out dimensional control of the work to the required specification
Slinging and hand signalling the movement of suspended loads in the workplace Real unit · ProQual Awarding Body
This unit equips learners with knowledge of the roles and responsibilities of slingers and signallers in moving suspended loads. You'll identify and inspect different types of slings, attach loads securely, and use hand signals to direct load movement while maintaining effective communication.
What you'll be able to do
- Describe the roles and responsibilities of a slinger and signaller
- Identify different types of slings and their appropriate uses
- Inspect slings for damage and defects
- Attach slings to loads correctly and securely
- Use hand signals to direct the movement of suspended loads
- Maintain clear and effective communication with the crane operator
- Ensure the safety of personnel and equipment during lifting operations
By email
Free, by email
Is this the right qualification for you?
One email to help you decide: the facts, what it teaches, the jobs it leads to and where to start free. With a link back here. Nothing else follows unless you confirm your address.
Juliette Denny, Zavmo's founder, writes about learning and work on LinkedIn. Follow Juliette's Learning Tribe
Study the units online with a personal AI tutor, for £70 a month. Your first Future Fluency module is free.
03The standards
The national standards these units are built against
What the job actually needs, in the words employers and awarding bodies already use for the work itself.
- Standard
Control, direct and guide the operation of plant or machinery
- Standard
Direct and guide the movement of plant or machinery in mines
- Standard
Lift, transfer and position loads
- Standard
Operate Plant or Machinery for Non-Operational Activities
- Standard
Operate Plant or Machinery to Access, Lift and Transfer Set Pieces and Items
- Standard
Operate mobile elevated work platforms
- Standard
Operate plant or machinery to compact
- Standard
Operate plant or machinery to construct or form
- Standard
Operate plant or machinery to construct or form
- Standard
Operate plant or machinery to lay and distribute
- Standard
Operate plant or machinery to process
- Standard
Operate plant or machinery to sweep, clean or clear
- Standard
Operate plant to compact
- Standard
Operate plant to construct or form
- Standard
Operate plant to lay and distribute
- Standard
Operate specialised plant and machinery to performance requirements (lifting and transferring) in offshore crane operations
- Standard
Provide information to vehicle drivers operating in your area of responsibility
- Standard
Set out secondary dimensional work control
04Where it leads
The jobs these credits are mapped to
A qualification is never a dead end here. Each of these is a job record this qualification is a mapped route into.
- 1 record
- 1 record
- 1 record
Where this can lead
Plant Operations Manager
This work can lead to VP of Global Operations, running operations across several sites, or Chief Operating Officer, overseeing a whole company's operations.
See the whole journeyStill deciding?
One email to help you decide: the facts, what it teaches, the jobs it leads to and where to start free. With a link back here. Nothing else follows unless you confirm your address.
05The credits
The credits, and who awards them
Level 2 credits are regulated, and they are awarded by ProQual Awarding Body rather than by Zavmo. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you have covered and what is next.
What you would be collecting
Conforming to general health, safety and welfare in the workplaceConforming to productive working practices in the workplaceControlling, Directing and Guiding the Operation of Plant or Machinery in the WorkplaceMoving, handling and storing resources in the workplaceOperating plant or machinery for non-operational activities in the workplacePreparing and operating batching plant to process materials in the workplacePreparing and operating binder spreaders to lay and distribute materials in the workplacePreparing and operating boom-type mobile elevating work platforms, MEWP, in the workplace
Each one is a real unit registered against this qualification.
How you’d practise it
You don’t watch this. You do it.
You are not assessed on remembering this. You are assessed on applying it, analysing it, evaluating it and producing something. So that is what the practice is: projects, role play and your own live cases, with a tutor in the room.
The Navigator · your what-if tutor Illustration The Navigator Your plan for “Controlling, Directing and Guiding the Operation of Plant or Machinery in the Workplace” assumes the same two people are free in March. What have you seen that makes you slightly uneasy about that?
You One of them has been pulled onto the migration twice already. Probably fine.
The Navigator That is the thread worth pulling. Let us build the version where it happens a third time and find the move that works either way.
- Bring your own plan Create
For “Controlling, Directing and Guiding the Operation of Plant or Machinery in the Workplace” you bring the plan you are actually working on, not a case study. Zavmo pulls on the assumptions in it until the weak one shows.
What you leave holding
The standards this credential builds, in the shape the product keeps them
Nothing here is marked learned. There is no learner on a public page, so the map shows what the qualification covers rather than what anybody has done.
ProQual Level 2 NVQ Certificate in Plant Operations (Construction)
- Control, direct and guide the operation of plant or machinery
- Direct and guide the movement of plant or machinery in mines
- Lift, transfer and position loads
- Operate Plant or Machinery for Non-Operational Activities
- Operate Plant or Machinery to Access, Lift and Transfer Set Pieces and Items
- Operate mobile elevated work platforms
- Operate plant or machinery to compact
- Operate plant or machinery to construct or form
How you would learn this
One to one, on the work you already do
A tutor sets the task against your own job and marks the reasoning, at your pace. There is no cohort to fall behind.
A lesson from Conforming to general health, safety and welfare in the workplace, one of this qualification's own units.
Applied to your work in any of these jobs
Which job do you mean?
This unit focuses on understanding and complying with health, safety, and welfare regulations relevant to the workplace.
How the thinking builds
- 1 Remember
- 2 Understand
- 3 Apply
- 4 Analyse
- 5 Evaluate
- 6 Create
It is £70 a month, billed monthly. Your free first module is Future Fluency, and you can cancel any time. Teaching towards this qualification begins when you subscribe.
Built for ProQual Level 2 NVQ Certificate in Plant Operations (Construction)
51 units in this credential, in the order it lists them, awarded by ProQual Awarding Body.
- Conforming to general health, safety and welfare in the workplace
- Conforming to productive working practices in the workplace
- Controlling, Directing and Guiding the Operation of Plant or Machinery in the Workplace
- Moving, handling and storing resources in the workplace
- Operating plant or machinery for non-operational activities in the workplace
- Preparing and operating batching plant to process materials in the workplace
and 45 more in the full unit list below.
Free tools
Want a read on where you stand?
Three free tools, no account needed. Each one ends with a role, a level and a way in.
Learned on your own work, taught one-to-one.
Everything you just read, learned one-to-one on the job you already do. Your free first module is Future Fluency, so you can see how the teaching works before you pay for anything.
Start my free AI Fluency moduleNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.
The title, level, credits, guided learning hours and unit learning outcomes on this page are taken from the Ofqual Register of Regulated Qualifications. Contains public sector information licensed under the Open Government Licence v3.0. Where this data comes from.