Pearson Education Ltd · RQF Level 3
Pearson BTEC Level 3 National Extended Diploma in Mechanical Engineering
You don’t just earn this. You learn to use it, one-to-one, on your own real work.
- LevelRQF Level 3
- Guided learning1,080 hours
- Units in this qualification38
Awarded by Pearson Education Ltd · on the Ofqual register
Start here
See how this course maps onto your role
Ten quick questions, one per Future Fluency, asked against this qualification rather than a generic one.
Check my fluency, free
About 5 minutes · No card · Nothing to commit to
What you’ll learn
What each unit actually teaches you to do
BTEC Nationals are level 3 vocational qualifications that provide specialist, work-related learning in a range of sectors.
These are the units Pearson Education Ltd registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated, and every one you earn is yours to keep.
A Specialist Engineering ProjectReal unit · Pearson Education Ltd
This unit guides learners through defining, planning, implementing, evaluating, and documenting a specialist engineering project. Emphasis is placed on adhering to safety regulations and meeting specified objectives and key performance indicators.
What you'll be able to do
- Define the scope and objectives of a specialist engineering project
- Plan the stages and resources required for the engineering project
- Implement the planned engineering project, adhering to safety regulations
- Evaluate the outcomes of the engineering project against the initial objectives
- Document the entire engineering project process, including challenges and solutions
Additive Manufacturing ProcessesReal unit · Pearson Education Ltd
You'll explore the principles and types of additive manufacturing technologies. The unit includes preparing 3D models, operating and maintaining additive manufacturing equipment, and understanding material properties and process advantages.
What you'll be able to do
- Describe the principles of additive manufacturing processes
- Identify different types of additive manufacturing technologies
- Prepare 3D models for additive manufacturing
- Operate and maintain additive manufacturing equipment
Analogue Electronic CircuitsReal unit · Pearson Education Ltd
You'll develop knowledge of analogue electronic circuit principles, including voltage, current, and resistance. The unit covers analysis, design, construction, testing, and troubleshooting of analogue circuits using theoretical and practical methods.
What you'll be able to do
- Understand the fundamental principles of analogue electronic circuits, including voltage, current, and resistance.
- Analyse the behaviour of analogue electronic circuits using circuit theorems and simulation software.
- Design and build analogue electronic circuits to meet specific performance requirements.
- Test and troubleshoot analogue electronic circuits using appropriate test equipment.
- Evaluate the performance of analogue electronic circuits and identify areas for improvement.
Applied Commercial and Quality Principles in EngineeringReal unit · Pearson Education Ltd
You'll understand commercial operations and quality assurance principles within engineering. The unit covers supply chain management, contract types, commercial impact analysis, continuous improvement, and regulatory compliance.
What you'll be able to do
- Understand the principles of commercial operations within an engineering context
- Apply quality assurance principles and practices in engineering activities
- Analyse the impact of commercial decisions on engineering projects
- Evaluate the importance of continuous improvement in engineering quality
- Understand the role of regulatory bodies and standards in engineering
Autonomous Mobile RoboticsReal unit · Pearson Education Ltd
This unit investigates different types of autonomous mobile robots, their software and hardware components, and applications across industries. You'll develop practical skills to design and build an autonomous mobile robot to meet a client brief.
What you'll be able to do
- Investigate the use of different types of autonomous mobile robot
- Investigate the software and hardware used in autonomous mobile robots
- Develop an autonomous mobile robot to complete an activity defined in a client brief
Calculus to Solve Engineering ProblemsReal unit · Pearson Education Ltd
You'll study fundamental calculus concepts and apply differentiation and integration techniques to solve engineering problems. The unit includes modelling, analysis, and optimisation of engineering systems using calculus.
What you'll be able to do
- Understand the fundamental concepts of calculus
- Apply calculus techniques to solve engineering problems
- Differentiate and integrate mathematical functions relevant to engineering
- Use calculus to model and analyse engineering systems
- Interpret and evaluate the results of calculus-based calculations
- Apply calculus to optimise engineering designs and processes
Computer Aided Design in EngineeringReal unit · Pearson Education Ltd
This unit introduces the principles and techniques of Computer Aided Design (CAD) in engineering. You'll create, interpret, and analyse 2D and 3D engineering drawings using CAD software and manage CAD files within an organisational context.
What you'll be able to do
- Understand the principles of Computer Aided Design (CAD) in engineering
- Use CAD software to create 2D and 3D engineering drawings
- Apply CAD techniques to design engineering components and assemblies
- Interpret and analyse engineering drawings produced using CAD software
- Manage and store CAD files effectively within an organisation
Computer Aided Manufacturing and PlanningReal unit · Pearson Education Ltd
You'll study the principles of Computer Aided Manufacturing (CAM) and Computer Aided Planning (CAP). The unit includes using CAM and CAP software to generate manufacturing instructions, plan processes, and evaluate their effectiveness.
What you'll be able to do
- Understand the principles of Computer Aided Manufacturing (CAM)
- Understand the principles of Computer Aided Planning (CAP)
- Use CAM software to generate manufacturing instructions
- Use CAP software to plan manufacturing processes
- Evaluate the effectiveness of CAM and CAP in a manufacturing environment
Computer ProgrammingReal unit · Pearson Education Ltd
You'll gain an understanding of fundamental computer programming concepts and develop skills to design, develop, test, debug, and document computer programs using appropriate languages and industry standards.
What you'll be able to do
- Understand the fundamental concepts of computer programming
- Design and develop computer programs using appropriate programming languages
- Test and debug computer programs effectively
- Document computer programs according to industry standards
Computer Systems SecurityReal unit · Pearson Education Ltd
This unit covers computer systems security principles, including identification of threats and vulnerabilities. You'll implement and evaluate security measures while considering relevant legislation and risk management practices.
What you'll be able to do
- Understand the fundamental principles of computer systems security
- Identify potential security threats and vulnerabilities in computer systems
- Implement security measures to protect computer systems from threats
- Evaluate the effectiveness of security measures implemented
- Understand relevant legislation and ethical considerations related to computer systems security
Computer Systems Support and PerformanceReal unit · Pearson Education Ltd
This unit covers computer systems architecture, support principles, and performance optimisation. You'll learn to provide effective systems support, monitor performance, and implement improvements.
What you'll be able to do
- Understand the architecture of computer systems
- Understand the principles of computer systems support
- Understand how to optimise computer systems performance
- Provide computer systems support
- Monitor and improve computer systems performance
Delivery of Engineering Processes Safely as a TeamReal unit · Pearson Education Ltd
This unit focuses on the safe delivery of engineering processes within a team environment. You'll understand safety importance, identify hazards, apply safe working practices, and demonstrate effective teamwork and communication skills.
What you'll be able to do
- Understand the importance of safety in engineering processes
- Identify potential hazards and risks associated with engineering activities
- Apply safe working practices and procedures in an engineering environment
- Demonstrate effective teamwork and communication skills in engineering projects
- Contribute to the safe delivery of engineering processes as part of a team
- Evaluate the effectiveness of team working in ensuring safety
Dynamic Mechanical Principles in PracticeReal unit · Pearson Education Ltd
You'll gain practical understanding of dynamic mechanical principles, applying mathematical analysis to dynamic systems, investigating system behaviour, using measurement tools, interpreting data, and solving engineering problems related to dynamics.
What you'll be able to do
- Understand the fundamental principles of dynamic mechanical systems
- Apply mathematical principles to analyse dynamic mechanical systems
- Investigate the behaviour of dynamic mechanical systems in practice
- Use appropriate tools and equipment to measure and analyse dynamic mechanical properties
- Interpret data and draw conclusions about the performance of dynamic mechanical systems
- Apply knowledge of dynamic mechanical principles to solve practical engineering problems
Electrical MachinesReal unit · Pearson Education Ltd
You'll understand the principles of operation, construction, and characteristics of DC, AC synchronous, and AC induction electrical machines. The unit enables analysis of machine performance and application of control methods for speed and torque.
What you'll be able to do
- Understand the principles of operation of different types of electrical machines
- Analyse the construction and characteristics of electrical machines
- Evaluate the performance of electrical machines under various operating conditions
- Apply methods for controlling the speed and torque of electrical machines
- Understand the maintenance requirements for electrical machines
Electrical Power Distribution and TransmissionReal unit · Pearson Education Ltd
You'll study the principles and components of electrical power distribution and transmission systems. The unit covers voltage levels, transformers, and factors affecting efficiency and reliability, enabling learners to apply relevant safety regulations.
What you'll be able to do
- Understand the principles of electrical power distribution and transmission systems.
- Explain the components and operation of electrical power distribution and transmission networks.
- Analyse the factors affecting the efficiency and reliability of electrical power distribution and transmission.
- Apply relevant safety regulations and procedures for working with electrical power distribution and transmission equipment.
- Evaluate the environmental impact of electrical power distribution and transmission systems and identify sustainable solutions.
Electronic Devices and CircuitsReal unit · Pearson Education Ltd
It teaches you to understand electronic components and circuits, construct and test basic circuits, analyse circuit behaviour, apply design principles, and troubleshoot faults effectively.
What you'll be able to do
- Understand the characteristics of different electronic components
- Construct and test basic electronic circuits
- Analyse the behaviour of electronic circuits
- Understand the principles of circuit design
- Troubleshoot electronic circuits
Electronic Measurement and Testing of CircuitsReal unit · Pearson Education Ltd
You'll study the principles of electronic measurement and testing of circuits. The unit develops practical skills to perform measurements and tests, identify errors, and analyse results to ensure circuit functionality.
What you'll be able to do
- Understand the principles of electronic measurement
- Understand the principles of electronic testing of circuits
- Perform electronic measurements on circuits
- Perform electronic testing of circuits
- Analyse the results of electronic measurements and testing
Engineering Maintenance and Condition Monitoring TechniquesReal unit · Pearson Education Ltd
This unit provides an understanding of engineering maintenance principles and condition monitoring techniques. You'll identify maintenance strategies, apply monitoring methods, analyse data to predict failures, and implement maintenance procedures.
What you'll be able to do
- Understand the principles of engineering maintenance
- Identify different types of maintenance strategies
- Apply condition monitoring techniques to assess the health of engineering equipment
- Analyse condition monitoring data to predict potential failures
- Implement maintenance procedures to ensure the reliable operation of engineering systems
Engineering PrinciplesReal unit · Pearson Education Ltd
This unit provides foundational knowledge of mechanical, electrical, and thermal engineering principles. You'll apply these principles to solve practical problems, understand material properties, and interpret engineering drawings and specifications.
What you'll be able to do
- Understand fundamental mechanical principles
- Understand fundamental electrical principles
- Understand fundamental thermal principles
- Apply engineering principles to solve practical problems
- Understand the properties of engineering materials
- Interpret engineering drawings and diagrams
Engineering Product Design and ManufactureReal unit · Pearson Education Ltd
You'll understand engineering product design principles and apply the design process from concept to prototype. The unit includes evaluation of manufacturing methods, creation of detailed drawings, and analysis of prototype performance.
What you'll be able to do
- Understand the principles of engineering product design
- Apply the product design process from concept to prototype
- Evaluate different manufacturing processes for engineering products
- Create detailed engineering drawings and specifications
- Manufacture a prototype of an engineering product
- Analyse and evaluate the performance of the manufactured product against design specifications
Fabrication Manufacturing ProcessesReal unit · Pearson Education Ltd
This unit covers various fabrication manufacturing processes including cutting, forming, joining, and finishing. You'll understand the principles, applications, advantages, and disadvantages of these processes and develop skills to apply and evaluate them in manufacturing contexts.
What you'll be able to do
- Understand different fabrication manufacturing processes
- Understand the principles of different fabrication manufacturing processes
- Apply fabrication manufacturing processes
- Evaluate the application of fabrication manufacturing processes
Further Engineering MathematicsReal unit · Pearson Education Ltd
It teaches you to apply algebraic, trigonometric, calculus, and statistical methods to solve engineering problems. You'll learn to manipulate formulae, solve equations, and analyse engineering data effectively.
What you'll be able to do
- Apply algebraic techniques to solve engineering problems
- Apply trigonometric methods to solve engineering problems
- Utilise calculus to solve engineering problems
- Apply statistical methods to analyse engineering data
Industrial RoboticsReal unit · Pearson Education Ltd
This unit covers the health and safety and maintenance requirements of industrial robots, their operation, design, sensors, and end effectors. You'll learn to produce programming solutions for industrial robots to address engineering problems.
What you'll be able to do
- Investigate the health and safety and maintenance requirements associated with industrial robots
- Investigate the operation and design of industrial robots for different applications
- Investigate the operation of industrial robot sensors and end effectors
- Produce a program for an industrial robot to solve an engineering problem
Maintenance of Mechanical SystemsReal unit · Pearson Education Ltd
This unit covers the principles of mechanical system maintenance, including preventative and corrective approaches. You'll identify common faults, apply diagnostic and repair techniques, and demonstrate practical maintenance skills.
What you'll be able to do
- Understand the principles of mechanical system maintenance, including preventative and corrective maintenance.
- Identify common mechanical system faults and their causes.
- Apply appropriate maintenance techniques to diagnose and repair mechanical system faults.
- Demonstrate practical skills in the maintenance of mechanical systems, including lubrication, alignment, and component replacement.
- Evaluate the effectiveness of maintenance procedures and recommend improvements.
Manufacturing Computer Numerical Control Machining ProcessesReal unit · Pearson Education Ltd
You'll explore the principles, setup, operation, and programming of Computer Numerical Control (CNC) machines in manufacturing. The unit includes analysis of quality control, health and safety requirements, and CNC machining advantages.
What you'll be able to do
- Understand the principles of Computer Numerical Control (CNC) machining processes in manufacturing
- Describe the different types of CNC machines used in manufacturing
- Explain the process of setting up and operating CNC machines
- Apply CNC programming techniques to manufacture components
- Analyse the quality control procedures used in CNC machining
- Evaluate the health and safety requirements when working with CNC machines
Manufacturing Primary Forming ProcessesReal unit · Pearson Education Ltd
This unit covers primary forming manufacturing processes such as casting, forging, and extrusion. You'll understand process principles, techniques, applications, and evaluate advantages and disadvantages for specific uses.
What you'll be able to do
- Understand the range of primary forming processes used in manufacturing, including casting, forging, and extrusion.
- Explain the principles and techniques involved in each primary forming process.
- Analyse the advantages and disadvantages of different primary forming processes for specific applications.
- Evaluate the impact of primary forming processes on material properties and product quality.
- Apply health and safety procedures relevant to manufacturing primary forming processes.
Manufacturing Secondary Machining ProcessesReal unit · Pearson Education Ltd
This unit covers secondary machining processes including drilling, tapping, and reaming. You'll understand process principles, set up and operate equipment, perform machining to specified tolerances, and apply quality control procedures.
What you'll be able to do
- Understand the principles of secondary machining processes
- Set up and operate secondary machining equipment
- Perform secondary machining operations to specified tolerances
- Understand quality control procedures in secondary machining
Mechanical Behaviour of Metallic MaterialsReal unit · Pearson Education Ltd
This unit provides an understanding of the mechanical behaviour of metallic materials, including deformation, strength, creep, and fatigue. You'll analyse properties under various conditions and evaluate material suitability for applications.
What you'll be able to do
- Describe the different types of mechanical behaviour exhibited by metallic materials
- Explain the factors that influence the mechanical behaviour of metallic materials
- Analyse the properties of metallic materials under different loading conditions
- Evaluate the suitability of different metallic materials for specific engineering applications
Mechanical Behaviour of Non-Metallic MaterialsReal unit · Pearson Education Ltd
You'll explore the mechanical behaviour of non-metallic materials such as polymers, ceramics, and composites. The unit covers deformation, strength, time-dependent behaviour, and factors influencing material properties and suitability.
What you'll be able to do
- Describe the different types of mechanical behaviour exhibited by non-metallic materials
- Explain the factors that influence the mechanical behaviour of non-metallic materials
- Analyse the properties of non-metallic materials under different loading conditions
- Evaluate the suitability of different non-metallic materials for specific engineering applications
Mechanical Measurement and Inspection TechnologyReal unit · Pearson Education Ltd
You'll study mechanical measurement and inspection technology principles. The unit develops practical skills to perform measurements and inspections, use relevant instruments, and analyse results to identify defects and ensure component quality.
What you'll be able to do
- Understand the principles of mechanical measurement
- Understand the principles of mechanical inspection technology
- Perform mechanical measurements
- Perform mechanical inspections
- Analyse the results of mechanical measurements and inspections
Microcontroller Systems for EngineersReal unit · Pearson Education Ltd
This unit provides knowledge of microcontroller system architecture and programming principles. You'll develop, test, debug, and integrate microcontroller programmes within engineering systems for practical applications.
What you'll be able to do
- Understand the architecture of microcontroller systems
- Understand the principles of programming microcontroller systems
- Develop programs for microcontroller systems
- Test and debug microcontroller systems
- Integrate microcontroller systems with other engineering systems
- Understand the applications of microcontroller systems in engineering
Pneumatic and Hydraulic SystemsReal unit · Pearson Education Ltd
This unit provides knowledge of pneumatic and hydraulic system principles and components. You'll analyse system performance, apply safe working practices, and carry out maintenance procedures for pneumatic and hydraulic systems.
What you'll be able to do
- Understand the fundamental principles of pneumatic systems
- Understand the fundamental principles of hydraulic systems
- Analyse the components used in pneumatic systems
- Analyse the components used in hydraulic systems
- Apply safe working practices when working with pneumatic and hydraulic systems
- Evaluate the performance of pneumatic systems
- Evaluate the performance of hydraulic systems
- Maintain pneumatic systems
- Maintain hydraulic systems
Principles and Applications of Fluid MechanicsReal unit · Pearson Education Ltd
You'll study fundamental fluid mechanics principles, fluid properties, and behaviour under various conditions. The unit enables application of fluid mechanics to solve engineering problems and evaluate fluid flow in diverse systems.
What you'll be able to do
- Understand the fundamental principles of fluid mechanics
- Explain the properties of fluids and their behaviour under different conditions
- Apply fluid mechanics principles to solve engineering problems
- Analyse fluid flow in various engineering systems
- Evaluate the applications of fluid mechanics in different engineering contexts
- Use appropriate tools and techniques to measure fluid properties
Programmable Logic ControllersReal unit · Pearson Education Ltd
You'll study the fundamental principles and architecture of Programmable Logic Controllers (PLCs). The unit focuses on developing, implementing, testing, and troubleshooting basic PLC programmes for effective control of engineering processes.
What you'll be able to do
- Understand the fundamental principles of Programmable Logic Controllers (PLCs)
- Identify the key components and architecture of a PLC system
- Develop and implement basic PLC programs using appropriate programming languages
- Test and troubleshoot PLC programs to ensure correct functionality
- Apply PLC systems to control engineering processes
Static Mechanical Principles in PracticeReal unit · Pearson Education Ltd
You'll study static mechanical principles including forces, moments, and equilibrium. The unit develops skills to analyse structural behaviour under load, apply engineering standards, and interpret static mechanical properties practically.
What you'll be able to do
- Understand the fundamental principles of static mechanics, including forces, moments, and equilibrium.
- Apply static mechanical principles to analyse the behaviour of structures and components under load.
- Demonstrate practical skills in measuring and calculating static mechanical properties.
- Interpret and apply relevant engineering standards and codes of practice related to static mechanics.
- Evaluate the suitability of different materials for static mechanical applications.
Thermodynamic Principles and PracticeReal unit · Pearson Education Ltd
You'll study fundamental thermodynamic principles and apply thermodynamic laws to analyse engineering systems. The unit includes calculation of thermodynamic properties, analysis of cycles, and application to equipment design and operation.
What you'll be able to do
- Understand the fundamental principles of thermodynamics
- Apply thermodynamic laws to analyse engineering systems
- Calculate thermodynamic properties of substances
- Analyse thermodynamic cycles and processes
- Apply thermodynamic principles to the design and operation of engineering equipment
Welding TechnologyReal unit · Pearson Education Ltd
You'll study various welding techniques such as MIG, TIG, and MMA, including material preparation and safety procedures. The unit develops practical skills in performing welding operations and inspecting weld quality.
What you'll be able to do
- Understand different welding techniques and their applications
- Prepare materials for welding
- Perform welding operations using different techniques
- Understand the importance of safety procedures in welding
- Inspect and test welds for quality
Work Experience in the Engineering SectorReal unit · Pearson Education Ltd
It teaches you to understand work experience requirements in the engineering sector, plan and prepare for placements, demonstrate professional behaviour, reflect on experiences, and understand relevant health and safety regulations.
What you'll be able to do
- Understand the requirements for work experience in the engineering sector
- Plan and prepare for a work experience placement
- Demonstrate professional behaviour in the workplace
- Reflect on and evaluate work experience
- Understand health and safety regulations in an engineering environment
The honest bit
You’ve started things before
Most courses were built for a room full of people who aren’t you. A cohort moves on whether or not your week allowed it, and by the third week the thing you’re behind on becomes the reason you stop opening it.
There’s no cohort here, and no timetable to fall behind. Before anything starts, Zavmo asks when you’re sharpest and how long you can realistically sit down for, then builds the sessions around those answers. A bad fortnight changes your pace. It doesn’t put you behind.
And you only pay once you start learning. Searching and planning are free, and you can cancel any time — so the cost of finding out is an afternoon, not a year.
Your passport
Every credit is a stamp you keep
Level 3 credits are regulated. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you’ve earned and what’s next.
A Specialist Engineering ProjectAdditive Manufacturing ProcessesAnalogue Electronic CircuitsApplied Commercial and Quality Principles in EngineeringAutonomous Mobile RoboticsCalculus to Solve Engineering ProblemsComputer Aided Design in EngineeringComputer Aided Manufacturing and Planning
Each stamp is a real unit registered against this qualification.
Who’d teach you this
The Evidence Evaluator
Assessor
Helps you show what you can actually do, gathering the evidence that proves it as you learn.
Meet all twelve tutorsWhere this connects
Where these credits take you
A qualification is never a dead end here. See the jobs its credits open, the national occupational standards its units map to, and the future skills they quietly build.
Where this can lead
Product Development Engineer
Your career here isn't a rigid ladder; it's more like a climbing wall with many routes. We're here to help you find the path that best suits your strengths and ambitions, whether that's becoming a deep technical specialist or leading teams and projects. The key is continuous learning and a genuine passion for building great products.
See the whole journey →Opens the roleProduct Development EngineerOne of the jobs this qualification is a route intoSee the role →Opens the roleSenior Product Development EngineerOne of the jobs this qualification is a route intoSee the role →Opens the roleProduct Development Engineer ManagerOne of the jobs this qualification is a route intoSee the role →Future FluencyAll ten future skillsSee how every unit is contextualised by the tenExplore →
How you’ll actually learn this
One-to-one, on your own real work
A qualification is usually something done to you: sit the class, sit the exam, hope it sticks. Here it’s the opposite. You learn it one-to-one with a companion, on your own real work, and you keep going until you can use it, not just recall it.
One-to-one, on your real workNo lectures, no past-papers. Every unit is practised on the actual tasks your job throws at you, a tutor beside you, not a video in front of you.
Taught to the top, not the testMost courses stop at remembering. Your companion keeps climbing: analysing, judging, creating. That’s the part a machine can’t do for you.
Credits you keep, a map that continuesEvery unit is regulated and yours for good. The day you finish, Zavmo already knows the next role your new credits open.
Applied to your work in any of these jobs
Which job do you mean?
This unit guides learners through defining, planning, implementing, evaluating, and documenting a specialist engineering project. Emphasis is placed on adhering to safety regulations and meeting specified objectives and key performance indicators.
How the thinking builds
- Remember
- Understand
- Apply
- Analyse
- Evaluate
- Create
Built for Pearson BTEC Level 3 National Extended Diploma in Mechanical Engineering
38 units in this credential, in the order it lists them, awarded by Pearson Education Ltd.
- A Specialist Engineering Project
- Additive Manufacturing Processes
- Analogue Electronic Circuits
- Applied Commercial and Quality Principles in Engineering
- Autonomous Mobile Robotics
- Calculus to Solve Engineering Problems
and 32 more in the full unit list below.
One to one, not one to many
No two people run this the same way
A course is written once and handed to everyone. This is assembled around you, and keeps changing as it learns you. Five things it reads, and what each one changes.
- Your actual work Every unit is taught against a live piece of your own work, not a worked example from a textbook.
- What you already know The first conversation finds your starting point, so you skip what you can already do and spend the time on what you cannot.
- The conditions you learn under Not a learning-styles quiz. The evidence does not support those. The dimensions the research does back, read once and used to shape the plan.
- How far you got last time It picks up mid-thought. The tutor knows what you said, what you struggled with, and what it asked you to try.
- Which tutor suits the moment Twelve of them, each for a different kind of thinking. The one who walks you through a first idea is not the one who stress-tests it.
See how you learn, free. Eight questions, no sign-up. A directional taster; the diagnostic inside Zavmo goes deeper and keeps adapting.
Why it sticks
Most courses stop at remembering
There’s a well-known ladder of how deeply you learn something, called Bloom’s Taxonomy. Most courses get you up the first two rungs: you remember some facts, you pass a test, you forget it. Real skill lives at the top. Judging, deciding, creating. And this isn’t a generic ladder: every rung has a named Zavmo tutor who walks you up it.
- 6CreateThe Creative Catalyst
- 5EvaluateThe Evidence Evaluator
- 4AnalyseThe Analyst
- 3ApplyThe Coach
- 2UnderstandThe Connector
- 1RememberThe Builder
Where most courses leave you Where Zavmo takes you
Why this matters: AI can already remember and understand for you. What it can’t do is
take your real problem and judge the right call. So the only learning worth paying
for is the learning that takes you to the top. That’s exactly what a tutor doing it with
you, on your real work, is for.
The value
Why the companion is worth £70 a month
You’re not paying for the units. They’re regulated, and the same wherever you earn them. You’re paying for the one thing that decides whether you actually get there: a companion that makes them stick, on your real work.
That is one-to-one on this qualification, every day, on the work you already do, for £70 a month. Your first module is free, so you can see the teaching before you pay for any of it. Billed monthly, cancel any time and billing stops.
Earned on your own work, taught to the top.
Everything you just read, learned one-to-one on the job you already do. Your first module is free, so you can see the teaching before you pay for any of it.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.