How you’d get it

How you’d get this certificate

  1. Zavmo teaches you. You learn the units one-to-one with an AI tutor, on your own work.
  2. You register with an approved centre. That is a college, training provider or employer Logic Certification Limited has approved to offer this qualification. Zavmo is not an approved centre, so you register with them, not with us.
  3. The centre assesses, and Logic Certification Limited awards. A qualified assessor at the centre judges your evidence, and the certificate comes from Logic Certification Limited.

More on studying for a qualification

01What it is

Earn your Level 2 Smart Metering Diploma to gain essential skills in smart meter installation and maintenance, enhancing your career prospects in the energy sector.

These are the units Logic Certification Limited registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated. Zavmo teaches towards them on your own work, and work done here is recognised as prior learning under the agreements we hold.

Zavmo is not an awarding body, is not an approved centre, and is not affiliated with Logic Certification Limited. It does the teaching and the mapping. Logic Certification Limited sets this qualification and awards it, and a qualified human assessor makes the assessment decision.

Free first step

Try a free Future Fluency lesson first

The free part is a Future Fluency lesson on using AI at work. It is not part of this qualification. Next, a free account. We build your plan for this qualification as you set up. Teaching towards this qualification begins when you subscribe.

No card · Nothing to commit to

02The units

What each unit actually teaches you to do

Applied practices and principles for installing low pressure natural gas smart meters up to U6 only Real unit · Logic Certification Limited
You'll gain knowledge of electrical safety risks, earthing types, and scientific principles related to gas utilisation for low pressure natural gas smart metres. The unit covers gas pressure regulators, combustion effects, and operating pressures within low pressure gas networks.

What you'll be able to do

  • Understand the dangers associated with electricity when preparing to install low pressure natural gas smart meters
  • Use scientific principles in gas utilisation for natural gas smart metering
  • Understand how to use gas pressure regulators
  • Know about combustion and the effects of its products
  • Understand building materials and methods used in the installation of natural gas smart meters
  • Understand gas safety regulations, legislation and standards in natural gas smart metering
Change single phase meter and associated equipment Real unit · Logic Certification Limited
It teaches you to plan, prepare, and safely change single phase metres and associated equipment following company procedures and health and safety standards. You'll conduct risk assessments, select and inspect equipment, and communicate work plans to relevant parties.

What you'll be able to do

  • Plan for work activities to change single phase meter and associated equipment in line with company procedures
  • Prepare resources to change single phase meter and associated equipment in line with company procedures
  • Change a single phase meter and associated equipment in line with company procedures
  • Understand how to change a single phase meter and associated equipment using general knowledge
  • Understand how to change a single phase meter and associated equipment using work-specific knowledge
Delivering customer service when working within the energy and utilities sector Real unit · Logic Certification Limited
You'll gain skills to prepare for work activities at customer premises and maintain professional relationships within the energy and utilities sector. The unit emphasises effective communication, documentation preparation, and addressing customer needs appropriately.

What you'll be able to do

  • Prepare for a work activity in a customers’ premises in the Energy and Utilities sector
  • Establish and maintain working relations with customers in the Energy and Utilities sector
Install and Commission Communication Systems for Smart Meters Real unit · Logic Certification Limited
This unit covers the principles of communication technologies used in smart metreing. You'll learn to plan, install, commission, test, and complete communication systems for smart metres, including understanding different in-house display equipment and their implications.

What you'll be able to do

  • Know the principles of communication technologies used in smart metering
  • Plan the location for the smart metering communication system
  • Install communication system for smart meters
  • Commission
  • Test and complete communication installation for smart meters
  • Identify and rectify faults in smart meter communication systems
Install single phase meter and associated equipment Real unit · Logic Certification Limited
You'll develop the ability to plan, prepare, and safely install single phase metres and associated equipment in accordance with company procedures and health and safety regulations. The unit includes conducting site-specific risk assessments and effective communication with affected parties.

What you'll be able to do

  • Plan for work activities to install single phase meter and associated equipment in line with company procedures
  • Prepare resources to install single phase meter and associated equipment in line with company procedures
  • Install a single phase meter and associated equipment in line with company procedures
  • Understand how to install a single phase meter and associated equipment using general knowledge
  • Understand how to install a single phase meter and associated equipment using work-specific knowledge
Low pressure gas smart meter tightness testing and direct purging Real unit · Logic Certification Limited
You'll learn to plan and prepare for tightness testing and direct purging of low pressure gas smart metres. The unit covers site risk assessments, compliance with industry standards, de-commissioning procedures, and conducting tightness tests and purging safely.

What you'll be able to do

  • Plan and prepare work activities for tightness testing and direct purging - low pressure only
  • De-commission natural gas systems and components to industry standards
  • Tightness test and direct purge low pressure natural gas smart meters
Prepare, install and commission low pressure natural gas smart meter and regulator up to 6.0m3/hr Real unit · Logic Certification Limited
This unit develops learners' skills to plan, prepare, install, and commission low pressure natural gas smart metres (up to 6.0m3/hr). It includes site inspection, risk assessment, voltage testing, de-commissioning procedures, and communication with affected parties.

What you'll be able to do

  • Plan and prepare work activities to install natural gas smart meter (up to 6.0m3/hr) on low pressure gas systems
  • Prepare resources to install natural gas smart meter (up to 6.0m3/hr) on low pressure gas systems
  • De-commission natural gas meters and regulators (up to 6.0m3/hr) on low pressure gas service
  • Install natural gas smart meter (up to 6.0m3/hr) on low pressure gas service
  • Commission natural gas smart meter (up to 6.0m3/hr) on low pressure gas service
Using and communicating technical Information in the energy and utilities sector Real unit · Logic Certification Limited
This unit develops learners' ability to obtain, interpret, and communicate technical information in the energy and utilities sector. It includes identifying information sources, using diagrams, and accurately recording and reporting technical data for work activities.

What you'll be able to do

  • Know relevant information sources for the Energy and Utilities sector
  • Obtain
  • Interpret and use technical information in the Energy and Utilities sector
  • Record and communicate technical information in the Energy and Utilities sector
Working practices in the energy and utilities sector Real unit · Logic Certification Limited
This unit provides learners with the skills to plan, prepare, and maintain safe working practices within the energy and utilities sector. It includes selecting appropriate tools, equipment, materials, PPE, preparing work areas, and obtaining necessary authorisations.

What you'll be able to do

  • Plan and prepare to complete activities in the Energy and Utilities sector
  • Maintain working practices whilst completing activities in the Energy and Utilities sector
  • Identify
  • Respond to and resolve problems and areas for improvement in own area of responsibility
  • Create and maintain effective working relationships in the Energy and Utilities sector
  • Contribute to own personal learning and development needs in the Energy and Utilities sector
Working safely in the energy and utilities sector Real unit · Logic Certification Limited
You'll understand hazards and risks specific to the energy and utilities sector, focusing on smart metre installation. The unit covers safety legislation, hazard identification, risk mitigation, and the correct selection and use of personal protective equipment (PPE).

What you'll be able to do

  • Know hazards and risks in the Energy and Utilities sector
  • Work to required safety signs and legislation in the Energy and Utilities sector
  • Select
  • Use and store personal protective equipment (PPE) relevant to the activity being carried out in the Energy and Utilities sector
  • Take action in the event of accidents and emergencies in the Energy and Utilities sector
  • Maintain a safe working environment in the Energy and Utilities sector
  • Manual handle tools, equipment and materials safely in the Energy and Utilities sector
03The standards

The national standards these units are built against

What the job actually needs, in the words employers and awarding bodies already use for the work itself.

  • Carry out fault finding on metering installations in the energy supply and use sector

    Standard
  • Carry out fault finding on smart meters in the energy supply and use sector Legacy

    Standard
  • Carry out installation or changing of electric meters and associated equipment

    Standard
  • Deliver customer service in the energy supply and use sector

    Standard
  • Deliver customer service in the energy supply and use sector Legacy

    Standard
  • Install and commission communication systems for Smart Meters

    Standard
  • Install and commission communication systems for metering installations

    Standard
  • Replace Plant and Apparatus in Electricity Power Utilities Environment

    Standard
  • Use and communicate technical information in the energy supply and use sector

    Standard
  • Work Safely in the Utilities Environment

    Standard
04Where it leads

The jobs these credits are mapped to

A qualification is never a dead end here. Each of these is a job record this qualification is a mapped route into.

Where this can lead

Junior Energy Management Assistant

This work can lead to a senior energy analyst role, or on to managing energy programmes across a whole portfolio of buildings.

See the whole journey
05The credits

The credits, and who awards them

Level 2 credits are regulated, and they are awarded by Logic Certification Limited rather than by Zavmo. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you have covered and what is next.

What you would be collecting

Applied practices and principles for installing low pressure natural gas smart meters up to U6 onlyChange single phase meter and associated equipmentDelivering customer service when working within the energy and utilities sectorInstall and Commission Communication Systems for Smart MetersInstall single phase meter and associated equipmentLow pressure gas smart meter tightness testing and direct purgingPrepare, install and commission low pressure natural gas smart meter and regulator up to 6.0m3/hrUsing and communicating technical Information in the energy and utilities sector

Each one is a real unit registered against this qualification.

How you’d practise it

You don’t watch this. You do it.

You are not assessed on remembering this. You are assessed on applying it, analysing it, evaluating it and producing something. So that is what the practice is: projects, role play and your own live cases, with a tutor in the room.

The Analyst The Analyst · your map-it-properly tutor Illustration
The Analyst In “Install and Commission Communication Systems for Smart Meters” you have moved the target from 48 hours to 24. Where does that time come from?
You The team prioritises better, I suppose.
The Analyst Or it comes out of the follow-ups, and reopened cases climb in about six weeks. Let us map it and find out which, before it is a surprise.
The same lesson on the real thing: the conversation in the middle, the thinking ladder on the left, and the criteria each answer is evidencing on the right.
  • Map a live decision Analyse

    “Install and Commission Communication Systems for Smart Meters” runs on a decision you are facing now. Zavmo maps it with you and shows what the second-order effect looks like before you find out the slow way.

What you leave holding

The standards this credential builds, in the shape the product keeps them

Nothing here is marked learned. There is no learner on a public page, so the map shows what the qualification covers rather than what anybody has done.

See Your Progress Grow Illustration
LCL Awards Level 2 Diploma In Smart Metering - Dual Fuel
  • Carry out fault finding on metering installations in the energy supply and use sector
  • Carry out fault finding on smart meters in the energy supply and use sector Legacy
  • Carry out installation or changing of electric meters and associated equipment
  • Deliver customer service in the energy supply and use sector
  • Deliver customer service in the energy supply and use sector Legacy
  • Install and commission communication systems for Smart Meters
  • Install and commission communication systems for metering installations
  • Replace Plant and Apparatus in Electricity Power Utilities Environment
This is your Mind Palace on learn.zavmo.ai. Every skill above comes from this role's own record, not an example borrowed from another job. A node lights up when you evidence it, and what you build stays yours between jobs. That is the part a course cannot do.

How you would learn this

One to one, on the work you already do

A tutor sets the task against your own job and marks the reasoning, at your pace. There is no cohort to fall behind.

A lesson from Applied practices and principles for installing low pressure natural gas smart meters up to U6 only, one of this qualification's own units.

Applied practices and principles for installing low pressure natural gas smart meters up to U6 only Level 2

Applied to your work in any of these jobs

Learners will gain knowledge of electrical safety risks, earthing types, and scientific principles related to gas utilisation for low pressure natural gas smart metres. The unit covers gas pressure regulators, combustion effects, and operating pressures within low pressure gas networks.

How the thinking builds
  1. 1 Remember
  2. 2 Understand
  3. 3 Apply
  4. 4 Analyse
  5. 5 Evaluate
  6. 6 Create
An illustration of a Zavmo lesson, built from this role’s own route. The unit, its objective and every criterion above are the awarding body’s own words, not an example.

It is £70 a month, billed monthly. Your free first module is Future Fluency, and you can cancel any time. Teaching towards this qualification begins when you subscribe.

Your Plan Illustration

Built for LCL Awards Level 2 Diploma In Smart Metering - Dual Fuel

10 units in this credential, in the order it lists them, awarded by Logic Certification Limited.

  1. Applied practices and principles for installing low pressure natural gas smart meters up to U6 only
  2. Change single phase meter and associated equipment
  3. Delivering customer service when working within the energy and utilities sector
  4. Install and Commission Communication Systems for Smart Meters
  5. Install single phase meter and associated equipment
  6. Low pressure gas smart meter tightness testing and direct purging

and 4 more in the full unit list below.

These are the real units of this credential, in its own order. Nothing here is marked done, because this plan has not been started by anyone yet. Yours would fill in as you go.

Free tools

Want a read on where you stand?

Three free tools, no account needed. Each one ends with a role, a level and a way in.

Learned on your own work, taught one-to-one.

Everything you just read, learned one-to-one on the job you already do. Your free first module is Future Fluency, so you can see how the teaching works before you pay for anything.

Build my plan, free

No card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.

The title, level, credits, guided learning hours and unit learning outcomes on this page are taken from the Ofqual Register of Regulated Qualifications. Contains public sector information licensed under the Open Government Licence v3.0. Where this data comes from.