NOCN · RQF Level 2
NOCN Level 2 NVQ Diploma in Performing Engineering Operations
You don’t just earn this. You learn to use it, one-to-one, on your own real work.
- LevelRQF Level 2
- Total credits40
- Guided learning214 hours
- Units in this qualification72
Awarded by NOCN · on the Ofqual register
Start here
See how this course maps onto your role
Ten quick questions, one per Future Fluency, asked against this qualification rather than a generic one.
Check my fluency, free
About 5 minutes · No card · Nothing to commit to
What you’ll learn
What each unit actually teaches you to do
Qualification Number 603/0649/X Total Qualification Time (TQT) 400 Credits 40 Minimum Age 16 Level Level 2 Registration Start Date 17/10/2016 Current Tariff £131.00 This qualification is vocationally based and as such, offers the opportunity for learners to demonstrate an achievement of practical skills, understanding and knowledge of working within performing engineering operations. Learners will gain knowledge on the generic skills such as health and safety and working in engineering and select one of two different pathways, engineering practices or technical support where they will be able to focus on the skills specific to their role. This qualification is suitable for learners looking to gain employment within the engineering sector at an operational level or for those already employed in an operational role within the sector where it can be achieved to demonstrate competence in their role.
These are the units NOCN registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated, and every one you earn is yours to keep.
Assembling Pattern, Model and Engineering Woodwork ComponentsReal unit · NOCN
It teaches you to assemble pattern, model, and engineering woodwork components to required dimensions. You'll use appropriate joining techniques, check assembled components for accuracy and quality, and rectify any defects or deviations.
What you'll be able to do
- Assemble pattern, model and engineering woodwork components to meet required specifications.
- Demonstrate knowledge of the processes involved in assembling pattern, model and engineering woodwork components.
Assembling Structural Sub Assemblies to Produce a Public Service VehicleReal unit · NOCN
You'll learn to assemble structural sub-assemblies for public service vehicles following specified procedures and quality standards. The unit includes component identification, assembly techniques, use of appropriate tools, and adherence to safety and quality control processes.
What you'll be able to do
- Assemble structural sub-assemblies to produce a public service vehicle, following specified procedures and quality standards.
- Demonstrate knowledge of how to assemble structural sub-assemblies to produce a public service vehicle, including component identification, assembly techniques, and quality control processes.
Assembling and Testing Electronic CircuitsReal unit · NOCN
You'll learn to assemble and test electronic circuits according to circuit diagrams. The unit covers testing procedures, fault identification through analysis of test results, and understanding the function of key electronic components and correct soldering techniques.
What you'll be able to do
- Assemble and test electronic circuits according to given specifications.
- Demonstrate knowledge of the correct procedures for assembling and testing electronic circuits.
Assembling and Testing Fluid Power SystemsReal unit · NOCN
You'll assemble and test fluid power systems by following specified diagrams and instructions. They will connect components using appropriate fittings, test for leaks and functionality, adjust system parametres, and understand fluid power principles and components.
What you'll be able to do
- Assemble and test fluid power systems according to specified procedures.
- Demonstrate knowledge of the principles and practices involved in assembling and testing fluid power systems.
Assembling, Wiring and Testing Electrical Panels/Components Mounted in EnclosuresReal unit · NOCN
It teaches you to assemble, wire, and test electrical panels and components within enclosures. They will interpret electrical drawings, assemble and wire components correctly, manage cables, and test for functionality and safety.
What you'll be able to do
- Assemble, wire and test electrical panels and components mounted in enclosures.
- Describe the methods used to assemble, wire and test electrical panels and components mounted in enclosures.
Carrying Out Aircraft Detail Fitting ActivitiesReal unit · NOCN
It teaches you to carry out aircraft detail fitting activities by selecting appropriate tools, preparing work areas, following procedures, and checking the quality of completed fittings against required standards.
What you'll be able to do
- Carry out aircraft detail fitting activities to the required standards
- Demonstrate knowledge of how to carry out aircraft detail fitting activities
Carrying Out Hand Forging of Engineering MaterialsReal unit · NOCN
You'll learn to carry out hand forging of engineering materials to meet specifications. The unit includes preparing the work area, applying forging techniques, inspecting components for quality, and rectifying defects while maintaining safety.
What you'll be able to do
- Carry out hand forging of engineering materials to meet specified requirements.
- Demonstrate knowledge of the processes involved in carrying out hand forging of engineering materials.
Carrying Out Heat Treatment of Engineering MaterialsReal unit · NOCN
This unit covers carrying out heat treatment of engineering materials according to specified parametres. You'll select appropriate processes, prepare materials, operate heat treatment equipment, and monitor temperature and time to achieve desired properties.
What you'll be able to do
- Carry out heat treatment of engineering materials according to specified parameters
- Monitor and control the heat treatment process to achieve desired material properties
- Demonstrate knowledge of the principles and techniques involved in the heat treatment of engineering materials
Carrying Out Maintenance Activities on Motorsport Vehicle Electrical EquipmentReal unit · NOCN
This unit equips learners to carry out maintenance activities on motorsport vehicle electrical equipment. You'll prepare vehicles and work areas, diagnose faults using testing methods, repair or replace components, and test completed work following manufacturer instructions.
What you'll be able to do
- Carry out maintenance activities on motorsport vehicle electrical equipment, following manufacturer's instructions.
- Demonstrate knowledge of the electrical systems and components found in motorsport vehicles and the maintenance procedures required.
Carrying out Engineering Activities Efficiently and EffectivelyReal unit · NOCN
This unit develops learners' ability to work efficiently and effectively within engineering environments. You'll learn to organise work activities, use resources to minimise waste, communicate effectively, and follow established procedures and best practices.
What you'll be able to do
- Work efficiently and effectively in engineering environments, following established procedures and best practices.
- Demonstrate knowledge of how to work efficiently and effectively in engineering, including time management, resource utilisation, and communication skills.
Conducting Business Improvement ActivitiesReal unit · NOCN
This unit provides learners with the ability to conduct business improvement activities, including identifying improvement areas, gathering and analysing data, developing and implementing solutions, and monitoring effectiveness. It also covers knowledge of business improvement methodologies and tools.
What you'll be able to do
- Conduct business improvement activities effectively
- Demonstrate knowledge of how to conduct business improvement activities
Cutting and Shaping Materials using Thermal Cutting EquipmentReal unit · NOCN
It teaches you to cut and shape materials using thermal cutting equipment. You'll select suitable equipment, prepare the work area, apply cutting techniques to specified dimensions, and control parametres to achieve accurate and clean cuts.
What you'll be able to do
- Cut and shape materials using thermal cutting equipment to meet specified requirements
- Demonstrate knowledge of the principles and practices involved in cutting and shaping materials using thermal cutting equipment
Diagnosing and Rectifying Faults on Motorsport Vehicle Systems during CompetitionReal unit · NOCN
You'll learn to diagnose and rectify faults on motorsport vehicle systems during competition. The unit covers identifying fault symptoms, using diagnostic tools and techniques, interpreting diagnostic information, and performing prompt and effective repairs in a competitive environment.
What you'll be able to do
- Diagnose faults on motorsport vehicle systems during competition.
- Rectify faults on motorsport vehicle systems during competition.
- Understand the procedures for diagnosing faults on motorsport vehicle systems during competition.
- Understand the procedures for rectifying faults on motorsport vehicle systems during competition.
Fettling, Finishing and Checking Cast ComponentsReal unit · NOCN
This unit covers fettling, finishing, and checking cast components. You'll remove excess material using fettling techniques, finish surfaces to specified requirements, check for defects and dimensional accuracy, and understand various fettling methods.
What you'll be able to do
- Fettle, finish and check cast components to ensure they meet quality standards.
- Demonstrate knowledge of the techniques and tools used to fettle, finish and check cast components.
Finishing Surfaces by Applying Coatings or CoveringsReal unit · NOCN
This unit covers the preparation of surfaces and the application of coatings or coverings to achieve a consistent and defect-free finish. You'll develop skills in surface preparation, application techniques, inspection, and corrective actions to ensure durable and high-quality finishes.
What you'll be able to do
- Finish surfaces by applying appropriate coatings or coverings, ensuring a high-quality and durable finish.
- Demonstrate knowledge of different coating and covering materials, application techniques, and surface preparation methods used in finishing surfaces.
Finishing Surfaces by Applying TreatmentsReal unit · NOCN
It teaches you to finish surfaces by preparing them according to requirements, applying treatments using appropriate methods and materials, and checking finished surfaces to ensure quality. You'll also understand different types of surface treatments and their applications.
What you'll be able to do
- Finish surfaces by applying treatments to meet specified requirements.
- Demonstrate knowledge of the methods and materials used to finish surfaces by applying treatments.
Fitting Sub Assemblies and Components to Public Service VehiclesReal unit · NOCN
You'll learn to fit sub-assemblies and components to public service vehicles according to specifications. The unit covers identifying correct sub-assemblies, vehicle preparation, fitting using appropriate tools and techniques, and checking alignment and functionality of fitted components.
What you'll be able to do
- Fit sub-assemblies to public service vehicles according to specifications.
- Fit components to public service vehicles according to specifications.
- Understand the procedures for fitting sub-assemblies to public service vehicles.
- Understand the procedures for fitting components to public service vehicles.
Forming and Assembling Electrical Cable Enclosure and Support SystemsReal unit · NOCN
You'll develop the ability to form and assemble electrical cable enclosure and support systems according to specifications. The unit includes component formation, assembly procedures, cable securing methods, and inspection to ensure compliance with drawings and industry standards.
What you'll be able to do
- Form and assemble electrical cable enclosure and support systems according to specifications and industry standards.
- Demonstrate knowledge of the principles and practices involved in forming and assembling electrical cable enclosure and support systems, including component selection and installation techniques.
Forming and Assembling Pipework SystemsReal unit · NOCN
This unit provides learners with the skills to form and assemble pipework systems in line with industry standards. You'll learn to prepare work areas, form components, use appropriate joining methods, inspect for leaks, and adhere to safety and quality regulations.
What you'll be able to do
- Form and assemble pipework systems in accordance with industry standards and safety regulations.
- Demonstrate knowledge of the procedures for forming and assembling pipework systems.
General Electrical and Electronic Engineering ApplicationsReal unit · NOCN
It teaches you to carry out general electrical and electronic engineering applications safely and effectively. You'll follow established procedures, adhere to safety guidelines, use appropriate tools and test equipment, and develop an understanding of basic circuit analysis and component selection.
What you'll be able to do
- Carry out general electrical and electronic engineering applications, following established procedures and safety guidelines.
- Demonstrate knowledge of how to carry out general electrical and electronic engineering applications, including circuit analysis, component selection, and testing methods.
General Fabrication and Welding ApplicationsReal unit · NOCN
You'll carry out general fabrication and welding applications by applying safe working practices, preparing materials, performing fabrication and welding techniques, and checking completed work against specifications.
What you'll be able to do
- Carry out general fabrication and welding applications in accordance with industry standards and safety regulations.
- Demonstrate knowledge of the processes involved in general fabrication and welding applications.
General Machining, Fitting and Assembly ApplicationsReal unit · NOCN
This unit develops learners' ability to carry out general machining, fitting, and assembly applications. You'll perform basic machining operations, select appropriate cutting tools and speeds, check dimensions and tolerances, and carry out fitting operations such as filing, tapping, and reaming.
What you'll be able to do
- Carry out general machining applications to meet required standards.
- Carry out general fitting applications to meet required standards.
- Carry out general assembly applications to meet required standards.
- Understand the procedures for general machining applications.
- Understand the procedures for general fitting applications.
- Understand the procedures for general assembly applications.
General Maintenance Engineering ApplicationsReal unit · NOCN
It teaches you to perform general maintenance engineering tasks, including routine maintenance, fault diagnosis, and component repair or replacement. You'll follow established procedures and develop an understanding of preventative maintenance principles and inspection techniques.
What you'll be able to do
- Carry out general maintenance engineering applications according to established procedures.
- Demonstrate knowledge of the principles and practices of general maintenance engineering applications.
Inspecting a Motorsport Vehicle during a CompetitionReal unit · NOCN
You'll inspect motorsport vehicles during competition by conducting visual inspections, identifying mechanical and safety issues, and reporting findings. They will also gain knowledge of key vehicle components relevant to inspection.
What you'll be able to do
- Inspect a motorsport vehicle during a competition, following established procedures.
- Demonstrate knowledge of the inspection procedures and requirements for motorsport vehicles during a competition.
Installing Aircraft Mechanical FastenersReal unit · NOCN
It teaches you to install aircraft mechanical fasteners following specified procedures and safety guidelines. You'll develop competence in fastener installation, safety application, and quality inspection, supported by knowledge of different types of aircraft mechanical fasteners.
What you'll be able to do
- Install aircraft mechanical fasteners according to specified procedures and safety guidelines.
- Demonstrate knowledge of the correct methods for installing aircraft mechanical fasteners.
Joining Public Service Vehicle Components by Mechanical ProcessesReal unit · NOCN
This unit covers mechanical joining methods for Public Service Vehicle components. You'll select suitable joining techniques, prepare components for alignment and fit, perform mechanical joining processes, and inspect completed joints to required standards.
What you'll be able to do
- Join Public Service Vehicle components using mechanical processes.
- Describe the methods used to join Public Service Vehicle components using mechanical processes.
Maintaining Electrical Equipment/SystemsReal unit · NOCN
This unit focuses on maintaining electrical equipment and systems. You'll gain knowledge and skills to follow maintenance procedures, perform routine tasks, diagnose faults with suitable techniques, and repair or replace components effectively.
What you'll be able to do
- Maintain electrical equipment and systems in accordance with established procedures
- Demonstrate knowledge of the principles and practices involved in maintaining electrical equipment and systems
Maintaining Electronic Equipment/SystemsReal unit · NOCN
This unit covers the maintenance of electronic equipment and systems. You'll learn to follow established procedures, carry out routine maintenance, diagnose faults using appropriate tools, and repair or replace faulty components to ensure correct operation.
What you'll be able to do
- Maintain electronic equipment and systems in accordance with established procedures
- Demonstrate knowledge of the principles and practices involved in maintaining electronic equipment and systems
Maintaining Fluid Power EquipmentReal unit · NOCN
This unit provides learners with skills to maintain fluid power equipment effectively and safely. You'll inspect equipment, perform routine maintenance tasks, identify and rectify common faults, and document maintenance activities in line with manufacturer specifications.
What you'll be able to do
- Maintain fluid power equipment according to manufacturer specifications and safety guidelines.
- Demonstrate knowledge of the principles and practices involved in maintaining fluid power equipment.
Maintaining Mechanical Devices and EquipmentReal unit · NOCN
It teaches you to maintain mechanical devices and equipment by inspecting for wear and damage, performing routine maintenance tasks such as lubrication and cleaning, replacing parts according to manufacturer instructions, and documenting maintenance activities.
What you'll be able to do
- Maintain mechanical devices and equipment in accordance with manufacturer's instructions and safety regulations.
- Demonstrate knowledge of the methods and procedures for maintaining mechanical devices and equipment.
Maintaining and Testing Process Instrumentation and Control DevicesReal unit · NOCN
You'll learn to maintain and test process instrumentation and control devices safely. The unit covers identifying devices, performing routine maintenance, testing functionality, recording results, and understanding the operational principles of various instrumentation and control devices.
What you'll be able to do
- Maintain and test process instrumentation and control devices safely
- Demonstrate knowledge of how to maintain and test process instrumentation and control devices
Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and TransportationReal unit · NOCN
You'll prepare and manoeuvre Armoured Fighting Vehicles (AFVs) for maintenance and transportation safely and effectively. The unit covers performing pre-operation checks, securing equipment, applying safety protocols, and controlling vehicle movement.
What you'll be able to do
- Prepare Armoured Fighting Vehicles (AFVs) for maintenance and transportation, following safety protocols
- Manoeuvre Armoured Fighting Vehicles (AFVs) safely and effectively
- Demonstrate knowledge of the procedures and safety requirements for preparing and manoeuvring Armoured Fighting Vehicles (AFVs) for maintenance and transportation
Preparing and Proving CNC Fabrication Machine Tool ProgramsReal unit · NOCN
This unit develops learners' skills to prepare and prove CNC fabrication machine tool programs by interpreting engineering drawings, programming using appropriate software, simulating to identify errors, modifying programs, and proving their accuracy. It includes understanding CNC codes and their importance.
What you'll be able to do
- Prepare and prove CNC fabrication machine tool programs accurately
- Demonstrate knowledge of how to prepare and prove CNC fabrication machine tool programs
Preparing and Proving CNC Machine Tool ProgramsReal unit · NOCN
This unit covers preparing and proving CNC machine tool programmes. You'll interpret engineering drawings, prepare programmes using software, simulate and correct errors, set up machine tools with appropriate tooling, and prove programmes through testing.
What you'll be able to do
- Prepare and prove CNC machine tool programs.
- Describe the methods used to prepare and prove CNC machine tool programs.
Preparing and Using Grinding MachinesReal unit · NOCN
You'll learn to prepare and operate grinding machines to achieve desired surface finishes and dimensional accuracy. The unit covers the selection of grinding wheels, machine setup, grinding techniques, and inspection for defects to ensure quality outcomes.
What you'll be able to do
- Prepare and use grinding machines to achieve desired surface finishes and dimensional accuracy.
- Demonstrate knowledge of different types of grinding machines, grinding wheels, and techniques for preparing and using them effectively and safely.
Preparing and Using Lathes for Turning OperationsReal unit · NOCN
You'll prepare and use lathes for turning operations, selecting suitable tooling, inspecting equipment, securing workpieces, and setting lathe speed and feed rates. They will apply turning techniques to achieve specified dimensions and surface finishes.
What you'll be able to do
- Prepare lathes for turning operations
- Use lathes safely and effectively for turning operations
- Demonstrate knowledge of how to prepare and use lathes for turning operations
Preparing and Using Milling MachinesReal unit · NOCN
It teaches you to prepare and use milling machines effectively and safely. You'll select appropriate machines and tools, perform pre-use checks, set cutting parametres, and carry out milling operations to meet specified quality standards.
What you'll be able to do
- Prepare milling machines in accordance with established procedures and safety guidelines
- Use milling machines to perform specified tasks, adhering to quality standards
- Demonstrate knowledge of the principles and techniques involved in preparing and using milling machines
Preparing and using CNC Fabrication MachineryReal unit · NOCN
This unit covers preparing and using CNC fabrication machinery safely and effectively. You'll prepare machinery, load and set up materials, operate machinery to produce components to specification, monitor the process, and make necessary adjustments.
What you'll be able to do
- Prepare and use CNC fabrication machinery safely and effectively.
- Demonstrate knowledge of the procedures and safety precautions for preparing and using CNC fabrication machinery.
Preparing and using CNC Machining CentresReal unit · NOCN
You'll learn to prepare and operate CNC machining centres safely and effectively. The unit covers machine preparation, program loading, tool setting, process monitoring, component production to specifications, and maintaining a clean and safe work environment.
What you'll be able to do
- Prepare and use CNC machining centres effectively and safely.
- Demonstrate knowledge of the processes involved in preparing and using CNC machining centres.
Preparing and using CNC Milling MachinesReal unit · NOCN
You'll develop competence in preparing and using CNC milling machines, including tool selection and setup, program loading and verification, machine operation to produce components to specification, process monitoring, adjustment, and finished component inspection, alongside understanding machine components.
What you'll be able to do
- Prepare and use CNC milling machines competently
- Demonstrate knowledge of how to prepare and use CNC milling machines
Preparing and using CNC Turning MachinesReal unit · NOCN
It teaches you to prepare and use CNC turning machines to produce components according to specifications. You'll gain practical skills in machine setup, program loading, tool setting, process monitoring, adjustment, and maintaining safety and cleanliness in the work area.
What you'll be able to do
- Prepare and use CNC turning machines effectively and safely.
- Demonstrate knowledge of the processes involved in preparing and using CNC turning machines.
Preparing and using Industrial RobotsReal unit · NOCN
You'll gain knowledge and skills to prepare and operate industrial robots safely and effectively. This includes understanding manufacturer preparation steps, adhering to safety guidelines, demonstrating preparation procedures, and operating robots for specified tasks while recognising hazards.
What you'll be able to do
- Prepare industrial robots in accordance with manufacturer's instructions and safety guidelines.
- Use industrial robots effectively and safely for the intended purpose.
- Know the procedures for preparing industrial robots for operation.
- Know the correct methods for using industrial robots in various applications.
Preparing and using Manual Flame Brazing and Braze Welding EquipmentReal unit · NOCN
You'll develop practical skills to prepare and use manual flame brazing and braze welding equipment safely. This includes selecting appropriate equipment, preparing the work area, applying brazing techniques, controlling heat input, and inspecting joints for quality.
What you'll be able to do
- Prepare and use manual flame brazing and braze welding equipment safely and effectively
- Demonstrate knowledge of the procedures and safety precautions required when preparing and using manual flame brazing and braze welding equipment
Preparing and using Manual Metal Arc Welding EquipmentReal unit · NOCN
It teaches you to prepare and use manual metal arc welding equipment safely and effectively. You'll gain knowledge of equipment setup, welding parametre selection, welding techniques, and weld inspection to produce sound joints and identify defects.
What you'll be able to do
- Prepare and use manual metal arc welding equipment safely and effectively to produce sound welds.
- Demonstrate knowledge of the principles of manual metal arc welding, including equipment setup, welding techniques, and safety precautions.
Preparing and using Manual Oxy/Fuel Gas Welding EquipmentReal unit · NOCN
It teaches you to prepare and use manual oxy/fuel gas welding equipment safely and effectively. You'll develop skills in equipment preparation, identifying correct gas pressures, leak checks, safe lighting and extinguishing procedures, and performing basic welding techniques.
What you'll be able to do
- Prepare manual gas welding equipment for use.
- Use manual gas welding equipment safely and effectively.
- Understand the procedures for preparing manual gas welding equipment.
- Understand the safe working practices when using manual gas welding equipment.
Preparing and using Manual TIG or Plasma-Arc Welding EquipmentReal unit · NOCN
This unit covers the preparation and use of manual TIG or plasma-arc welding equipment. You'll learn to select appropriate equipment, inspect for defects, set up according to safety guidelines, and check gas flow and electrical connections.
What you'll be able to do
- Prepare manual TIG or plasma-arc welding equipment for use
- Use manual TIG or plasma-arc welding equipment effectively
- Demonstrate knowledge of how to prepare and use manual TIG or plasma-arc welding equipment
Preparing and using Semi-Automatic MIG, MAG and Flux Cored Arc Welding EquipmentReal unit · NOCN
It teaches you to prepare and use semi-automatic MIG, MAG, and flux cored arc welding equipment safely and effectively. You'll develop skills in equipment preparation, setting welding parametres, producing welds, inspecting for defects, and making necessary adjustments.
What you'll be able to do
- Prepare and use semi-automatic MIG, MAG and flux cored arc welding equipment in accordance with safety procedures and industry standards.
- Demonstrate knowledge of the correct procedures for preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment.
Producing Aircraft Detail AssembliesReal unit · NOCN
You'll gain the skills to produce aircraft detail assemblies to required specifications and quality standards. The unit includes component assembly using appropriate techniques and tools, inspection for defects, documentation of processes, and safe handling of materials.
What you'll be able to do
- Produce aircraft detail assemblies to the required specifications and quality standards.
- Demonstrate knowledge of the techniques and procedures involved in producing aircraft detail assemblies.
Producing CAD Models/Drawings using a CAD SystemReal unit · NOCN
You'll develop the ability to produce CAD models and drawings using a CAD system to meet specified design requirements and industry standards. The unit covers CAD software operation, modelling techniques, drawing conventions, and the importance of accuracy and compliance in design documentation.
What you'll be able to do
- Produce CAD models and drawings using a CAD system, according to specified design requirements and industry standards.
- Demonstrate knowledge of how to produce CAD models and drawings using a CAD system, including software operation, modelling techniques, and drawing conventions.
Producing Cast Components by Manual MeansReal unit · NOCN
You'll develop practical skills to produce cast components by manual means, including mould and core preparation, melting and pouring molten metal, casting removal, cleaning, defect inspection, and basic finishing. The unit also covers knowledge of metal types and solidification processes.
What you'll be able to do
- Produce cast components by manual means, ensuring they meet the required specifications.
- Demonstrate knowledge of the manual processes involved in producing cast components.
Producing Components by Rapid Prototyping TechniquesReal unit · NOCN
It teaches you to produce components using rapid prototyping techniques according to specified design parametres and material requirements. You'll gain knowledge of various rapid prototyping processes, material properties, equipment operation, and factors affecting the quality of prototypes.
What you'll be able to do
- Produce components by rapid prototyping techniques, following specified design parameters and material requirements.
- Demonstrate knowledge of how to produce components by rapid prototyping techniques, including process selection, material properties, and equipment operation.
Producing Components using Hand Fitting TechniquesReal unit · NOCN
You'll gain skills in producing components using hand fitting techniques, including tool selection, shaping and assembling components to required tolerances, measuring and inspecting accuracy, and refining fit to ensure quality and function, alongside relevant theoretical understanding.
What you'll be able to do
- Produce components using hand fitting techniques, ensuring accuracy and quality.
- Demonstrate knowledge of the hand fitting techniques used to produce components.
Producing Composite AssembliesReal unit · NOCN
You'll learn to produce composite assemblies by preparing work areas and resources, following procedures and instructions, checking quality against standards, and rectifying defects. The unit also includes knowledge of composite materials and assembly techniques.
What you'll be able to do
- Produce composite assemblies to the required standards
- Demonstrate knowledge of the processes involved in producing composite assemblies
Producing Composite Mouldings using Pre-Preg TechniquesReal unit · NOCN
It teaches you to produce composite mouldings using pre-preg laminating techniques. You'll prepare mould surfaces, apply pre-preg materials using correct methods, use vacuum bagging for consolidation, and inspect mouldings for defects.
What you'll be able to do
- Produce composite mouldings using pre-preg laminating techniques, following established procedures
- Ensure the quality and integrity of composite mouldings produced
- Demonstrate knowledge of the principles and techniques involved in producing composite mouldings using pre-preg laminating techniques
Producing Composite Mouldings using Resin Film Infusion TechniquesReal unit · NOCN
You'll gain the skills to produce composite mouldings using resin film infusion techniques. The unit covers mould and material preparation, resin application, infusion, curing, demoulding, and inspection to ensure mouldings meet specified quality standards.
What you'll be able to do
- Produce composite mouldings using resin film infusion techniques, adhering to safety guidelines.
- Demonstrate knowledge of the processes and materials used in producing composite mouldings using resin film infusion techniques.
Producing Composite Mouldings using Resin Flow Infusion TechniquesReal unit · NOCN
You'll learn to produce composite mouldings using resin flow infusion techniques to meet specified requirements. The unit covers preparation of work areas and equipment, application of resin flow infusion, monitoring and adjustment of resin flow, and inspection of finished mouldings for defects and conformity.
What you'll be able to do
- Produce composite mouldings using resin flow infusion techniques to meet specified requirements
- Demonstrate knowledge of the processes involved in producing composite mouldings using resin flow infusion techniques
Producing Composite Mouldings using Wet Lay-up TechniquesReal unit · NOCN
You'll produce composite mouldings using wet lay-up techniques by preparing moulds, applying resin and reinforcement materials, curing mouldings according to procedures, and removing mouldings without damage. They will also learn about different composite materials and processes.
What you'll be able to do
- Produce composite mouldings using wet lay-up techniques, adhering to specified procedures.
- Demonstrate knowledge of the materials and processes involved in producing composite mouldings using wet lay-up techniques.
Producing Electrical or Electronic Engineering Drawings using a CAD SystemReal unit · NOCN
You'll produce electrical or electronic engineering drawings using a CAD system. They will create drawings incorporating industry-standard symbols, annotate with relevant information, and save files appropriately, understanding drawing types and CAD conventions.
What you'll be able to do
- Produce electrical or electronic engineering drawings using a CAD system, adhering to industry standards.
- Demonstrate knowledge of the techniques and procedures for producing electrical or electronic engineering drawings using a CAD system.
Producing Engineering Project PlansReal unit · NOCN
This unit equips learners with the skills to produce engineering project plans by defining scope and objectives, developing schedules with realistic timelines, allocating resources effectively, and identifying risks with mitigation strategies. It includes understanding the importance of project planning.
What you'll be able to do
- Produce engineering project plans that meet specified requirements.
- Demonstrate knowledge of the processes involved in producing effective engineering project plans.
Producing Mechanical AssembliesReal unit · NOCN
You'll learn to produce mechanical assemblies by interpreting engineering drawings and specifications. The unit includes selecting tools, assembling components to specified tolerances, and inspecting assemblies to ensure accuracy and compliance with requirements.
What you'll be able to do
- Produce mechanical assemblies to meet specified requirements and tolerances.
- Demonstrate knowledge of the techniques and processes involved in producing mechanical assemblies.
Producing Platework Components and AssembliesReal unit · NOCN
You'll produce platework components and assemblies by interpreting engineering drawings, selecting materials, cutting, forming, assembling, and inspecting components. They will understand the processes involved in producing platework to specification.
What you'll be able to do
- Produce platework components and assemblies.
- Explain the processes involved in producing platework components and assemblies.
Producing Sheet Metal Components and AssembliesReal unit · NOCN
This unit covers the production of sheet metal components and assemblies. You'll interpret engineering drawings, use appropriate tools, produce components within dimensional tolerances, and inspect finished products to ensure quality and accuracy.
What you'll be able to do
- Produce sheet metal components to the required dimensions and tolerances.
- Assemble sheet metal components accurately and securely.
- Know the techniques for producing sheet metal components.
- Know the correct procedures for assembling sheet metal components.
Producing and Preparing Molten Materials for CastingReal unit · NOCN
You'll develop the ability to produce and prepare molten materials for casting, ensuring adherence to safety regulations and quality standards. Skills include producing molten materials to specified alloy compositions, controlling temperature and viscosity, and maintaining material quality.
What you'll be able to do
- Produce and prepare molten materials for casting, adhering to safety regulations and quality standards.
- Demonstrate knowledge of the correct methods for producing and preparing molten materials for casting.
Producing and Preparing Sand Moulds and Cores for CastingReal unit · NOCN
This unit covers the production and preparation of sand moulds and cores for casting. You'll develop skills in preparing sand mixtures, constructing moulds, producing cores, and assembling components with correct alignment and support, supported by theoretical knowledge of the processes involved.
What you'll be able to do
- Produce and prepare sand moulds and cores for casting, adhering to relevant standards and procedures.
- Demonstrate knowledge of the methods and techniques used to produce and prepare sand moulds and cores for casting.
Stripping and Rebuilding Motorsport Engines Pre-CompetitionReal unit · NOCN
You'll learn to safely strip and rebuild motorsport engines pre-competition. This includes dismantling, cleaning, inspecting, replacing components, reassembling with correct tolerances, and understanding the importance of each process.
What you'll be able to do
- Strip and rebuild motorsport engines in preparation for competition.
- Explain the procedures for stripping and rebuilding motorsport engines in preparation for competition.
Stripping and Rebuilding Motorsport Vehicles Pre-CompetitionReal unit · NOCN
You'll strip and rebuild motorsport vehicles pre-competition by dismantling components following procedures, inspecting for wear and damage, rebuilding according to manufacturer and competition guidelines, and applying appropriate torque settings.
What you'll be able to do
- Strip and rebuild motorsport vehicles in preparation for competition, following established procedures and safety guidelines.
- Demonstrate knowledge of the processes involved in stripping and rebuilding motorsport vehicles pre-competition, including component identification, inspection, and reassembly techniques.
Using Computer Software Packages to Assist with Engineering ActivitiesReal unit · NOCN
You'll learn to use computer software packages to assist with engineering activities. The unit covers selecting appropriate software, completing tasks according to instructions, saving work correctly, and troubleshooting basic software problems, supported by understanding software functions.
What you'll be able to do
- Use computer software packages effectively to assist with engineering activities
- Demonstrate knowledge of how to use computer software packages to assist with engineering activities
Using Wood for Pattern, Modelmaking and other Engineering ApplicationsReal unit · NOCN
It teaches you to use wood for pattern making, model making, and other engineering applications. You'll develop skills in selecting appropriate wood based on properties, preparing and shaping wood to specified dimensions and tolerances, supported by relevant theoretical knowledge.
What you'll be able to do
- Use wood for pattern making in engineering applications.
- Use wood for model making in engineering applications.
- Use wood for other engineering applications.
- Understand the properties of wood relevant to pattern making, model making and other engineering applications.
- Understand the procedures for using wood in pattern making, model making and other engineering applications.
Using and Communicating Technical InformationReal unit · NOCN
You'll learn to locate, interpret, and extract key technical information from various sources. They will apply this information to solve problems and communicate technical details clearly and concisely in written and verbal formats.
What you'll be able to do
- Use technical information effectively
- Communicate technical information clearly and accurately
- Demonstrate knowledge of how to use and communicate technical information
Wiring and Testing Electrical Equipment and CircuitsReal unit · NOCN
You'll develop the ability to wire and test electrical equipment and circuits in accordance with industry standards. The unit includes connecting wires per diagrams, using testing instruments, inspecting for defects, ensuring safety compliance, and documenting procedures.
What you'll be able to do
- Wire and test electrical equipment and circuits in accordance with industry standards and safety regulations.
- Demonstrate knowledge of the procedures involved in wiring and testing electrical equipment and circuits.
Wiring and Testing Programmable Controller based SystemsReal unit · NOCN
You'll learn to wire and test programmable controller based systems according to wiring diagrams and safety regulations. The unit includes selecting wiring methods, connecting components, and verifying system functionality.
What you'll be able to do
- Wire programmable controller based systems according to specified designs and safety regulations
- Test the functionality and performance of wired programmable controller based systems
- Demonstrate knowledge of the principles and procedures for wiring and testing programmable controller based systems
Working Safely in an Engineering EnvironmentReal unit · NOCN
It teaches you to work safely within an engineering environment by adhering to health and safety regulations and organisational procedures. You'll identify hazards, assess risks, implement control measures, use personal protective equipment correctly, and report unsafe conditions.
What you'll be able to do
- Work safely in an engineering environment, adhering to relevant health and safety regulations and organisational procedures.
- Demonstrate knowledge of how to work safely in an engineering environment, including hazard identification, risk assessment, and control measures.
The honest bit
You’ve started things before
Most courses were built for a room full of people who aren’t you. A cohort moves on whether or not your week allowed it, and by the third week the thing you’re behind on becomes the reason you stop opening it.
There’s no cohort here, and no timetable to fall behind. Before anything starts, Zavmo asks when you’re sharpest and how long you can realistically sit down for, then builds the sessions around those answers. A bad fortnight changes your pace. It doesn’t put you behind.
And you only pay once you start learning. Searching and planning are free, and you can cancel any time — so the cost of finding out is an afternoon, not a year.
Your passport
Every credit is a stamp you keep
Level 2 credits are regulated. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you’ve earned and what’s next.
Assembling Pattern, Model and Engineering Woodwork ComponentsAssembling Structural Sub Assemblies to Produce a Public Service VehicleAssembling and Testing Electronic CircuitsAssembling and Testing Fluid Power SystemsAssembling, Wiring and Testing Electrical Panels/Components Mounted in EnclosuresCarrying Out Aircraft Detail Fitting ActivitiesCarrying Out Hand Forging of Engineering MaterialsCarrying Out Heat Treatment of Engineering Materials
Each stamp is a real unit registered against this qualification.
Who’d teach you this
The Evidence Evaluator
Assessor
Helps you show what you can actually do, gathering the evidence that proves it as you learn.
Meet all twelve tutorsWhere this connects
Where these credits take you
A qualification is never a dead end here. See the jobs its credits open, the national occupational standards its units map to, and the future skills they quietly build.
NOCN Level 2 NVQ Diploma in Performing Engineering Operations
- Assembling Structural Sub Assemblies to Produce a Public Service Vehicle Legacy
- Assembling and testing electronic circuits Legacy
- Carry out basic electrical tests and repairs on motorsport vehicles
- Carrying out composite assembly operations
- Carrying out hand forging of engineering materials Legacy
- Carrying out heat treatment of engineering materials Legacy
- Casting metal by manual means
- Cleaning metallic castings manually
Where this can lead
Maintenance Technician I
Your journey starts here, learning the foundations. With dedication and a thirst for knowledge, there are genuinely exciting and rewarding career paths open to you in operations and maintenance. We're here to help you build that future.
See the whole journey →Opens the roleMaintenance Technician IOne of the jobs this qualification is a route intoSee the role →Opens the roleMaintenance Technician / ApprenticeOne of the jobs this qualification is a route intoSee the role →Opens the roleMaintenance ApprenticeOne of the jobs this qualification is a route into · 1 near-identical record folded inSee the role →Future FluencyAll ten future skillsSee how every unit is contextualised by the tenExplore →
Showing 3 roles, drawn from 4 job records mapped to this qualification.
Skills it covers
What the job actually needs. These are the standards the units are built against, in the words employers and awarding bodies already use for the work itself.
Assembling Structural Sub Assemblies to Produce a Public Service Vehicle LegacyAssembling and testing electronic circuits LegacyCarry out basic electrical tests and repairs on motorsport vehiclesCarrying out composite assembly operationsCarrying out hand forging of engineering materials LegacyCarrying out heat treatment of engineering materials LegacyCasting metal by manual meansCleaning metallic castings manuallyControlling and treating molten metal in readiness for castingDetermine the requirements for operations and maintenance of electricity network assetsDiagnosing and rectifying faults on motorsport vehicle systems (during competition) LegacyFettling, finishing and checking cast components LegacyFinishing surfaces by applying coatings or coverings LegacyFinishing surfaces by applying treatments LegacyFitting Sub Assemblies and Components to Public Service Vehicles LegacyForming and Assembling Pipework SystemsForming and Assembling Pipework Systems LegacyForming runner, riser and feeder systems in sand moulds+55 more
How you’ll actually learn this
One-to-one, on your own real work
A qualification is usually something done to you: sit the class, sit the exam, hope it sticks. Here it’s the opposite. You learn it one-to-one with a companion, on your own real work, and you keep going until you can use it, not just recall it.
One-to-one, on your real workNo lectures, no past-papers. Every unit is practised on the actual tasks your job throws at you, a tutor beside you, not a video in front of you.
Taught to the top, not the testMost courses stop at remembering. Your companion keeps climbing: analysing, judging, creating. That’s the part a machine can’t do for you.
Credits you keep, a map that continuesEvery unit is regulated and yours for good. The day you finish, Zavmo already knows the next role your new credits open.
Applied to your work in any of these jobs
Which job do you mean?
This unit enables learners to assemble pattern, model, and engineering woodwork components to required dimensions. Learners will use appropriate joining techniques, check assembled components for accuracy and quality, and rectify any defects or deviations.
How the thinking builds
- Remember
- Understand
- Apply
- Analyse
- Evaluate
- Create
Built for NOCN Level 2 NVQ Diploma in Performing Engineering Operations
72 units in this credential, in the order it lists them, awarded by NOCN.
- Assembling Pattern, Model and Engineering Woodwork Components
- Assembling Structural Sub Assemblies to Produce a Public Service Vehicle
- Assembling and Testing Electronic Circuits
- Assembling and Testing Fluid Power Systems
- Assembling, Wiring and Testing Electrical Panels/Components Mounted in Enclosures
- Carrying Out Aircraft Detail Fitting Activities
and 66 more in the full unit list below.
One to one, not one to many
No two people run this the same way
A course is written once and handed to everyone. This is assembled around you, and keeps changing as it learns you. Five things it reads, and what each one changes.
- Your actual work Every unit is taught against a live piece of your own work, not a worked example from a textbook.
- What you already know The first conversation finds your starting point, so you skip what you can already do and spend the time on what you cannot.
- The conditions you learn under Not a learning-styles quiz. The evidence does not support those. The dimensions the research does back, read once and used to shape the plan.
- How far you got last time It picks up mid-thought. The tutor knows what you said, what you struggled with, and what it asked you to try.
- Which tutor suits the moment Twelve of them, each for a different kind of thinking. The one who walks you through a first idea is not the one who stress-tests it.
See how you learn, free. Eight questions, no sign-up. A directional taster; the diagnostic inside Zavmo goes deeper and keeps adapting.
Why it sticks
Most courses stop at remembering
There’s a well-known ladder of how deeply you learn something, called Bloom’s Taxonomy. Most courses get you up the first two rungs: you remember some facts, you pass a test, you forget it. Real skill lives at the top. Judging, deciding, creating. And this isn’t a generic ladder: every rung has a named Zavmo tutor who walks you up it.
- 6CreateThe Creative Catalyst
- 5EvaluateThe Evidence Evaluator
- 4AnalyseThe Analyst
- 3ApplyThe Coach
- 2UnderstandThe Connector
- 1RememberThe Builder
Where most courses leave you Where Zavmo takes you
Why this matters: AI can already remember and understand for you. What it can’t do is
take your real problem and judge the right call. So the only learning worth paying
for is the learning that takes you to the top. That’s exactly what a tutor doing it with
you, on your real work, is for.
The value
Why the companion is worth £70 a month
You’re not paying for the units. They’re regulated, and the same wherever you earn them. You’re paying for the one thing that decides whether you actually get there: a companion that makes them stick, on your real work.
That is one-to-one on this qualification, every day, on the work you already do, for £70 a month. Your first module is free, so you can see the teaching before you pay for any of it. Billed monthly, cancel any time and billing stops.
Earned on your own work, taught to the top.
Everything you just read, learned one-to-one on the job you already do. Your first module is free, so you can see the teaching before you pay for any of it.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.