How you’d get it
How you’d get this certificate
- Zavmo teaches you. You learn the units one-to-one with an AI tutor, on your own work.
- You register with an approved centre. That is a college, training provider or employer ProQual Awarding Body has approved to offer this qualification. Zavmo is not an approved centre, so you register with them, not with us.
- The centre assesses, and ProQual Awarding Body awards. A qualified assessor at the centre judges your evidence, and the certificate comes from ProQual Awarding Body.
01What it is
ProQual Level 2 NVQ Diploma in Specialist Installation Occupations (Construction) provides a nationally recognised qualification for individuals working in the construction and built environment sector across a broad range of areas, assessing occupational competence.
These are the units ProQual Awarding Body registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated. Zavmo teaches towards them on your own work.
Zavmo is not an awarding body, is not an approved centre, and is not affiliated with ProQual Awarding Body. It does the teaching and the mapping. ProQual Awarding Body sets this qualification and awards it, and a qualified human assessor makes the assessment decision.
02The units
What each unit actually teaches you to do
Conforming to Productive Working Practices in the Workplace Real unit · ProQual Awarding Body
It teaches you to communicate effectively to establish productive work practices, plan work sequences following organisational procedures, maintain records, and foster good working relationships in the workplace.
What you'll be able to do
- Communicate with others to establish productive work practices.
- Follow organisational procedures to plan the sequence of work.
- Maintain relevant records in accordance with the organisational procedures.
- Maintain good working relationships when conforming to productive working practices.
Conforming to general health, safety and welfare in the workplace Real unit · ProQual Awarding Body
This unit covers health, safety and welfare legislation requirements in the workplace, ensuring that individuals can comply with the necessary standards for occupational safety.
What you'll be able to do
- Comply with all workplace health, safety and welfare legislation requirements.
Erecting and dismantling access/working platforms in the workplace Real unit · ProQual Awarding Body
You'll gain knowledge and skills to interpret information and comply with legislation when erecting and dismantling access/working platforms. The unit emphasises safe working practices, risk minimisation, and correct resource selection.
What you'll be able to do
- Interpret the given information relating to the work and resources when erecting and dismantling access/working platforms.
- Comply with relevant legislation and official guidance when erecting and dismantling access/working platforms.
- Maintain safe working practices when erecting and dismantling access/working platforms.
- Select the required quantity and quality of resources for the methods of work to erect and dismantle access/working platforms.
- Minimise the risk of damage to the work and surrounding area when erecting and dismantling access/working platforms.
- Complete the work within the allocated time when erecting and dismantling access/working platforms.
- Comply with the given contract information to erect and dismantle access/ working platforms to the required specification.
Installing acoustic packages and support frames in the workplace Real unit · ProQual Awarding Body
You'll learn to interpret information and comply with legislation when installing acoustic packages and support frames. The unit emphasises maintaining safe and healthy working practices and selecting appropriate resources.
What you'll be able to do
- Interpret the given information relating to the work and resources when installing acoustic packages and support frames.
- Comply with relevant legislation and official guidance when installing acoustic packages and support frames.
- Maintain safe and healthy working practices when installing acoustic packages and support frames.
- Select the required quantity and quality of resources for the methods of work to install acoustic packages and support frames.
- Minimise the risk of damage to the work and surrounding area when installing acoustic packages and support frames.
- Complete the work within the allocated time when installing acoustic packages and support frames.
- Comply with the given contract information to install acoustic packages and support frames to the required specification.
Installing and repairing ceilings in insulated enclosures in the workplace Real unit · ProQual Awarding Body
It teaches you to interpret information and comply with legislation when installing and repairing ceilings in insulated enclosures. You'll maintain safe working practices and select suitable tools and materials.
What you'll be able to do
- Interpret the given information relating to the work and resources when installing and repairing ceilings in insulated enclosures
- Comply with relevant legislation and official guidance when installing and repairing ceilings in insulated enclosures
- Maintain safe and healthy working practices when installing and repairing ceilings in insulated enclosures
- Select the required quantity and quality of resources for the methods of work to install and repair ceilings in insulated enclosures
- Minimise the risk of damage to the work and surrounding area when installing and repairing ceilings in insulated enclosures
- Complete the work within the allocated time when installing and repairing ceilings in insulated enclosures
- Comply with the given contract information to install and repair ceilings in insulated enclosures
Installing architectural metalwork in the workplace Real unit · ProQual Awarding Body
It teaches you to interpret technical information and comply with health and safety legislation when installing architectural metalwork. You'll maintain safe working practices and select appropriate resources.
What you'll be able to do
- Interpret the given information relating to the work, including drawings, specifications, and risk assessments, when installing architectural metalwork.
- Comply with relevant legislation, regulations, and official guidance relating to health and safety and environmental protection when installing architectural metalwork.
- Maintain safe and healthy working practices and adhere to health and safety procedures throughout the installation of architectural metalwork.
- Select the required quantity and quality of resources, including materials, tools, and equipment, for the methods of work to install architectural metalwork.
- Minimise the risk of damage to the architectural metalwork itself, the surrounding area, and other trades when installing architectural metalwork.
- Complete the installation work within the allocated time, meeting agreed deadlines and targets when installing architectural metalwork.
- Comply with the given contract information, including specifications, drawings, and instructions, to install architectural metalwork to the required specification.
Installing door and gate systems in the workplace Real unit · ProQual Awarding Body
This unit covers interpreting technical information and adhering to legislation when installing door and gate systems. You'll maintain safe practices, select appropriate resources, and minimise damage to the work area.
What you'll be able to do
- Interpret the given information relating to the work and resources when installing door and gate systems
- Comply with relevant legislation and official guidance when installing door and gate systems
- Maintain safe and healthy working practices when installing door and gate systems
- Select the required quantity and quality of resources for the methods of work to install door and gate systems
- Minimise the risk of damage to the work and surrounding area when installing door and gate systems
- Complete the work within the allocated time when installing door and gate systems
- Comply with the given contract information to install door and gate systems to the required specification
Installing industrial pallet racking systems in the workplace Real unit · ProQual Awarding Body
You'll gain skills to interpret technical drawings and comply with legislation when installing industrial pallet racking systems. The unit focuses on hazard identification and maintaining safe working practices.
What you'll be able to do
- Interpret the given information relating to the work, including drawings, specifications, and risk assessments, when installing industrial pallet racking systems.
- Comply with relevant legislation, regulations, and official guidance relating to health and safety and environmental protection when installing industrial pallet racking systems.
- Maintain safe working practices and adhere to health and safety procedures throughout the installation of industrial pallet racking systems.
- Select the required quantity and quality of resources, including materials, tools, and equipment, for the methods of work to install industrial pallet racking systems.
- Minimise the risk of damage to the industrial pallet racking system work itself, the surrounding area, and other trades when installing industrial pallet racking systems.
- Complete the installation work within the allocated time, meeting agreed deadlines and targets when installing industrial pallet racking systems.
- Comply with the given contract information, including specifications, drawings, and instructions, to install industrial pallet racking systems to the required specification.
Installing industrial shelving systems in the workplace Real unit · ProQual Awarding Body
This unit covers the interpretation of information and resources required for installing industrial shelving systems. You'll gain knowledge of relevant legislation and official guidance, and develop skills to maintain safe working practices during installation.
What you'll be able to do
- Interpret the given information relating to the work and resources when installing industrial shelving systems.
- Comply with relevant legislation and official guidance when installing industrial shelving systems.
- Maintain safe working practices when installing industrial shelving systems.
- Select the required quantity and quality of resources for the methods of work to install industrial shelving systems.
- Minimise the risk of damage to the work and surrounding area when installing industrial shelving systems.
- Complete the work within the allocated time when installing industrial shelving systems.
- Comply with the given contract information to install industrial shelving systems to the required specification.
Installing insulated cladding walls in the workplace Real unit · ProQual Awarding Body
You'll develop the ability to interpret information and resources for installing insulated cladding walls. The unit includes compliance with legislation, safe working practices, resource selection, and minimising damage during installation.
What you'll be able to do
- Interpret the given information relating to the work and resources when installing insulated cladding walls.
- Comply with relevant legislation and official guidance when installing insulated cladding walls.
- Maintain safe working practices when installing insulated cladding walls.
- Select the required quantity and quality of resources for the methods of work to install insulated cladding walls.
- Minimise the risk of damage to the work and surrounding area when installing insulated cladding walls.
- Complete the work within the allocated time when installing insulated cladding walls.
- Comply with the given contract information to install insulated cladding walls to the required specification.
Installing insulated enclosure floors in the workplace Real unit · ProQual Awarding Body
You'll develop the ability to interpret technical information and comply with legislation when installing insulated enclosure floors. The unit emphasises safe working practices and environmental considerations.
What you'll be able to do
- Interpret the given information relating to the work, including drawings, specifications, and risk assessments, when installing insulated enclosure floors.
- Comply with relevant legislation, regulations, and official guidance relating to health and safety and environmental protection when installing insulated enclosure floors.
- Maintain safe working practices and adhere to health and safety procedures throughout the installation of insulated enclosure floors.
- Select the required quantity and quality of resources, including materials, tools, and equipment, for the methods of work to install insulated enclosure floors.
- Minimise the risk of damage to the insulated enclosure floor work itself, the surrounding area, and other trades when installing insulated enclosure floors.
- Complete the installation work within the allocated time, meeting agreed deadlines and targets when installing insulated enclosure floors.
- Comply with the given contract information, including specifications, drawings, and instructions, to install insulated enclosure floors to the required specification.
Installing insulated enclosures in the workplace Real unit · ProQual Awarding Body
This unit covers the interpretation of technical information and compliance with legislation for installing insulated enclosures. You'll maintain safe working practices and select suitable resources throughout installation.
What you'll be able to do
- Interpret the given information relating to the work, including drawings, specifications, and risk assessments, when installing insulated enclosures.
- Comply with relevant legislation, regulations, and official guidance relating to health and safety and environmental protection when installing insulated enclosures.
- Maintain safe working practices and adhere to health and safety procedures throughout the installation of insulated enclosures.
- Select the required quantity and quality of resources, including materials, tools, and equipment, for the methods of work to install insulated enclosures.
- Minimise the risk of damage to the insulated enclosure work itself, the surrounding area, and other trades when installing insulated enclosures.
- Complete the installation work within the allocated time, meeting agreed deadlines and targets when installing insulated enclosures.
- Comply with the given contract information, including specifications, drawings, and instructions, to install insulated enclosures to the required specification.
Installing shutter systems in the workplace Real unit · ProQual Awarding Body
This unit equips learners to interpret information and adhere to health and safety regulations when installing shutter systems. You'll maintain safe working practices and select appropriate materials and tools.
What you'll be able to do
- Interpret the given information relating to the work, including drawings, specifications, and risk assessments, when installing shutter systems.
- Comply with relevant legislation, regulations, and official guidance relating to health and safety and environmental protection when installing shutter systems.
- Maintain safe and healthy working practices and adhere to health and safety procedures throughout the installation of shutter systems.
- Select the required quantity and quality of resources, including materials, tools, and equipment, for the methods of work to install shutter systems.
- Minimise the risk of damage to the shutter system work itself, the surrounding area, and other trades when installing shutter systems.
- Complete the installation work within the allocated time, meeting agreed deadlines and targets when installing shutter systems.
- Comply with the given contract information, including specifications, drawings, and instructions, to install shutter systems to the required specification.
Moving, handling and storing resources in the workplace Real unit · ProQual Awarding Body
You'll gain knowledge of safe moving, handling, and storing of resources in the workplace. The unit includes compliance with legislation, application of safe manual handling techniques, and prevention of damage to resources.
What you'll be able to do
- Comply with given information when moving, handling and/or storing resources
- Comply with relevant legislation and official guidance when moving, handling and/or storing resources
- Maintain safe working practices when moving, handling and/or storing resources
- Select the required quantity and quality of resources for the methods of work to move, handle and/or store occupational resources
- Prevent the risk of damage to occupational resources and surrounding environment when moving, handling and/or storing resources
- Complete the work within the allocated time when moving, handling and/or storing resources
- Comply with the given occupational resource information to move, handle and/or store resources to the required guidance
Preparing and operating boom-type mobile elevating work platforms, MEWP, in the workplace Real unit · ProQual Awarding Body
You'll learn to prepare and operate boom-type mobile elevating work platforms (MEWP) safely. The unit covers pre-start checks, control and safety devices, hazard identification, and correct operational procedures.
What you'll be able to do
- Prepare boom-type mobile elevating work platforms (MEWP) for operation in the workplace
- Operate boom-type mobile elevating work platforms (MEWP) safely in the workplace
- Identify and respond to potential hazards associated with operating boom-type mobile elevating work platforms (MEWP)
- Carry out pre-use checks on boom-type mobile elevating work platforms (MEWP)
- Position boom-type mobile elevating work platforms (MEWP) for effective work
- Adhere to relevant health and safety regulations when operating boom-type mobile elevating work platforms (MEWP)
- Store boom-type mobile elevating work platforms (MEWP) correctly after use
Preparing and operating industrial forklift trucks to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll gain the knowledge and skills to prepare and operate industrial forklift trucks safely. The unit includes pre-start checks, correct operating techniques, hazard identification, and the importance of load capacity.
What you'll be able to do
- Describe the procedures for preparing an industrial forklift truck for lifting and transferring loads.
- Demonstrate the correct operating techniques for an industrial forklift truck.
- Identify potential hazards associated with operating an industrial forklift truck in the workplace.
- Explain the importance of following safety regulations when operating an industrial forklift truck.
- Describe the procedures for lifting and transferring loads using an industrial forklift truck.
- Explain how to carry out routine checks and maintenance on an industrial forklift truck.
- Describe the procedures for parking and securing an industrial forklift truck.
Preparing and operating lorry loaders or knuckle booms to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll learn to prepare and operate lorry loaders or knuckle booms safely for lifting and transferring loads. The unit covers pre-operational checks, hazard identification, safe lifting techniques, and effective communication.
What you'll be able to do
- Describe the procedures for preparing lorry loaders or knuckle booms for lifting and transferring loads in the workplace
- Demonstrate the safe and effective operation of lorry loaders or knuckle booms to lift and transfer loads in the workplace
- Identify potential hazards and risks associated with operating lorry loaders or knuckle booms in the workplace
- Apply relevant health and safety regulations and guidelines when operating lorry loaders or knuckle booms
- Explain the importance of conducting pre-operational checks on lorry loaders or knuckle booms
- Describe the procedures for securing and transferring loads using lorry loaders or knuckle booms
- Explain the importance of effective communication during lifting and transferring operations
- Describe the procedures for safely parking and securing lorry loaders or knuckle booms after use
Preparing and operating mast climber-type mobile elevating work platforms, MEWP, in the workplace Real unit · ProQual Awarding Body
You'll learn to prepare and operate mast climber-type mobile elevating work platforms safely. The unit includes pre-start checks, control functions, hazard awareness, and safe operation at various heights.
What you'll be able to do
- Describe the procedures for preparing mast climber-type mobile elevating work platforms (MEWP) for operation in the workplace
- Operate mast climber-type mobile elevating work platforms (MEWP) safely and effectively in the workplace
- Identify potential hazards associated with operating mast climber-type mobile elevating work platforms (MEWP) in the workplace
- Follow organisational procedures for maintaining mast climber-type mobile elevating work platforms (MEWP) in the workplace
- Comply with relevant health and safety regulations when operating mast climber-type mobile elevating work platforms (MEWP) in the workplace
Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace Real unit · ProQual Awarding Body
This unit provides learners with knowledge of preparing and operating powered units, tools, or pedestrian plant safely. You'll understand pre-start checks, safety precautions, hazard identification, and defect reporting.
What you'll be able to do
- Describe the procedures for preparing powered units, tools or pedestrian plant, machinery or equipment for operation in the workplace
- Explain the safety precautions required when operating powered units, tools or pedestrian plant, machinery or equipment
- Operate powered units, tools or pedestrian plant, machinery or equipment effectively
- Follow organisational procedures when operating powered units, tools or pedestrian plant, machinery or equipment
- Describe the procedures for carrying out shut down and basic maintenance of powered units, tools or pedestrian plant, machinery or equipment
Preparing and operating rough terrain masted forklifts to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll develop the knowledge and skills to prepare and operate rough terrain masted forklifts safely for lifting and transferring loads. The unit covers pre-start checks, safe operating techniques, hazard identification, and compliance with safety procedures.
What you'll be able to do
- Describe the procedures for preparing a rough terrain masted forklift for lifting and transferring loads.
- Demonstrate the correct operating techniques for a rough terrain masted forklift.
- Identify potential hazards associated with operating a rough terrain masted forklift in the workplace.
- Explain the importance of following safety regulations when operating a rough terrain masted forklift.
- Describe the procedures for lifting and transferring loads using a rough terrain masted forklift.
- Explain how to carry out routine checks and maintenance on a rough terrain masted forklift.
- Describe the procedures for parking and securing a rough terrain masted forklift.
Preparing and operating scissor-type mobile elevating work platforms, MEWP, in the workplace Real unit · ProQual Awarding Body
It teaches you to prepare and safely operate scissor-type mobile elevating work platforms. It covers pre-start checks, hazard identification, environmental considerations, and correct operating procedures.
What you'll be able to do
- Prepare scissor-type mobile elevating work platforms (MEWP) for operation in the workplace
- Operate scissor-type mobile elevating work platforms (MEWP) safely in the workplace
- Identify and respond to potential hazards associated with operating scissor-type mobile elevating work platforms (MEWP)
- Carry out pre-use checks on scissor-type mobile elevating work platforms (MEWP)
- Position scissor-type mobile elevating work platforms (MEWP) for effective work
- Adhere to relevant health and safety regulations when operating scissor-type mobile elevating work platforms (MEWP)
- Store scissor-type mobile elevating work platforms (MEWP) correctly after use
Preparing and operating sideloader forklifts to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
This unit equips learners to prepare and operate sideloader forklifts safely and effectively. You'll understand pre-operational checks, safe operating techniques, hazard identification, and adherence to site safety procedures.
What you'll be able to do
- Describe the procedures for preparing sideloader forklifts for lifting and transferring loads in the workplace
- Demonstrate the safe and effective operation of sideloader forklifts to lift and transfer loads in the workplace
- Identify potential hazards and risks associated with operating sideloader forklifts in the workplace
- Apply relevant health and safety regulations and guidelines when operating sideloader forklifts
- Explain the importance of conducting pre-operational checks on sideloader forklifts
- Describe the procedures for securing and transferring loads using sideloader forklifts
- Explain the importance of effective communication during lifting and transferring operations
- Describe the procedures for safely parking and securing sideloader forklifts after use
Preparing and operting telescopic handlers to lift and transfer loads in the workplace Real unit · ProQual Awarding Body
You'll learn to prepare and operate telescopic handlers safely for lifting and transferring loads. The unit includes pre-start checks, control functions, hazard identification, and adherence to health and safety requirements.
What you'll be able to do
- Describe the procedures for preparing telescopic handlers for lifting and transferring loads in the workplace
- Operate telescopic handlers safely and effectively to lift and transfer loads in the workplace
- Identify different types of loads suitable for lifting and transferring using telescopic handlers
- Follow organisational procedures for maintaining telescopic handlers in the workplace
- Comply with relevant health and safety regulations when operating telescopic handlers in the workplace
Servicing and maintaining door or shutter systems in the workplace Real unit · ProQual Awarding Body
You'll develop the ability to interpret information and comply with legislation when servicing and maintaining door or shutter systems. The unit focuses on safe working practices and resource selection.
What you'll be able to do
- Interpret the given information relating to the work and resources when servicing and maintaining door or shutter systems
- Comply with relevant legislation and official guidance when servicing and maintaining door or shutter systems
- Maintain safe and healthy working practices when servicing and maintaining door or shutter systems
- Select the required quantity and quality of resources for the methods of work to service and maintain door or shutter systems
- Minimise the risk of damage to the work and surrounding area when servicing and maintaining door or shutter systems
- Complete the work within the allocated time when servicing and maintaining door or shutter systems
- Comply with the given contract information to service and maintain door or shutter systems to the required specification
Slinging and hand signalling the movement of suspended loads in the workplace Real unit · ProQual Awarding Body
This unit equips learners with knowledge of the roles and responsibilities of slingers and signallers in moving suspended loads. You'll learn to select and inspect slings, attach loads securely, and use hand signals to communicate effectively and maintain safety.
What you'll be able to do
- Describe the roles and responsibilities of a slinger and signaller
- Identify different types of slings and their appropriate uses
- Inspect slings for damage and defects
- Attach slings to loads correctly and securely
- Use hand signals to direct the movement of suspended loads
- Maintain clear and effective communication with the crane operator
- Ensure the safety of personnel and equipment during lifting operations
Using manual metal arc welding equipment Real unit · ProQual Awarding Body
It teaches you to safely set up, use, and shut down manual metal arc welding equipment. It covers safety precautions, electrode types, and welding positions to ensure effective welding practice.
What you'll be able to do
- Use manual metal arc welding equipment.
- Use manual metal arc welding equipment.
Using semi-automatic MIG or MAG welding equipment Real unit · ProQual Awarding Body
This unit covers the preparation and use of semi-automatic MIG or MAG welding equipment. You'll understand welding principles, equipment setup, process monitoring, and safe shutdown procedures.
What you'll be able to do
- Use semi-automatic MIG or MAG welding equipment effectively and safely
- Use semi-automatic MIG or MAG welding equipment, including understanding the principles and techniques involved
By email
Free, by email
Is this the right qualification for you?
One email to help you decide: the facts, what it teaches and where to start free. With a link back here. Nothing else follows unless you confirm your address.
Juliette Denny, Zavmo's founder, writes about learning and work on LinkedIn. Follow Juliette's Learning Tribe
Study the units online with a personal AI tutor, for £70 a month. Your first Future Fluency module is free.
03The standards
The national standards these units are built against
What the job actually needs, in the words employers and awarding bodies already use for the work itself.
- Standard
Dismantle and repair door, gate or shutter systems Legacy
- Standard
Elevate and track camera dollies
- Standard
Install Door and Gate Systems
- Standard
Install Industrial Pallet Racking Systems Legacy
- Standard
Install Industrial Shelving Systems Legacy
- Standard
Install Insulated Enclosure Floors Legacy
- Standard
Install Insulated Enclosures Legacy
- Standard
Install Shutter Systems Legacy
- Standard
Install acoustic packages and support frames
- Standard
Install and repair ceilings in insulated enclosures
- Standard
Install architectural metalwork
- Standard
Install assemblies and enclosures for Solar PV and EESS systems
- Standard
Install door, blind or shutter wiring systems Legacy
- Standard
Install enclosures for communications cables
- Standard
Install enclosures for electrical cables, conductors and wiring systems
- Standard
Install insulated cladding walls Legacy
- Standard
Install metal decking and edge trims
- Standard
Install studs by stud welding
Showing 18 of 21 standards these units map to.
Still deciding?
One email to help you decide: the facts, what it teaches and where to start free. With a link back here. Nothing else follows unless you confirm your address.
04The credits
The credits, and who awards them
Level 2 credits are regulated, and they are awarded by ProQual Awarding Body rather than by Zavmo. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you have covered and what is next.
What you would be collecting
Conforming to Productive Working Practices in the WorkplaceConforming to general health, safety and welfare in the workplaceErecting and dismantling access/working platforms in the workplaceInstalling acoustic packages and support frames in the workplaceInstalling and repairing ceilings in insulated enclosures in the workplaceInstalling architectural metalwork in the workplaceInstalling door and gate systems in the workplaceInstalling industrial pallet racking systems in the workplace
Each one is a real unit registered against this qualification.
How you’d practise it
You don’t watch this. You do it.
You are not assessed on remembering this. You are assessed on applying it, analysing it, evaluating it and producing something. So that is what the practice is: projects, role play and your own live cases, with a tutor in the room.
The Navigator · your what-if tutor Illustration The Navigator Your plan for “Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace” assumes the same two people are free in March. What have you seen that makes you slightly uneasy about that?
You One of them has been pulled onto the migration twice already. Probably fine.
The Navigator That is the thread worth pulling. Let us build the version where it happens a third time and find the move that works either way.
- Bring your own plan Create
For “Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace” you bring the plan you are actually working on, not a case study. Zavmo pulls on the assumptions in it until the weak one shows.
- Map a live decision Analyse
“Installing door and gate systems in the workplace” runs on a decision you are facing now. Zavmo maps it with you and shows what the second-order effect looks like before you find out the slow way.
What you leave holding
The standards this credential builds, in the shape the product keeps them
Nothing here is marked learned. There is no learner on a public page, so the map shows what the qualification covers rather than what anybody has done.
ProQual Level 2 NVQ Diploma in Specialist Installation Occupations (Construction)
- Dismantle and repair door, gate or shutter systems Legacy
- Elevate and track camera dollies
- Install Door and Gate Systems
- Install Industrial Pallet Racking Systems Legacy
- Install Industrial Shelving Systems Legacy
- Install Insulated Enclosure Floors Legacy
- Install Insulated Enclosures Legacy
- Install Shutter Systems Legacy
How you would learn this
One to one, on the work you already do
A tutor sets the task against your own job and marks the reasoning, at your pace. There is no cohort to fall behind.
A lesson from Conforming to Productive Working Practices in the Workplace, one of this qualification's own units.
Applied to your own work
This unit enables learners to communicate effectively to establish productive work practices, plan work sequences following organisational procedures, maintain records, and foster good working relationships in the workplace.
How the thinking builds
- 1 Remember
- 2 Understand
- 3 Apply
- 4 Analyse
- 5 Evaluate
- 6 Create
It is £70 a month, billed monthly. Your free first module is Future Fluency, and you can cancel any time. Teaching towards this qualification begins when you subscribe.
Built for ProQual Level 2 NVQ Diploma in Specialist Installation Occupations (Construction)
27 units in this credential, in the order it lists them, awarded by ProQual Awarding Body.
- Conforming to Productive Working Practices in the Workplace
- Conforming to general health, safety and welfare in the workplace
- Erecting and dismantling access/working platforms in the workplace
- Installing acoustic packages and support frames in the workplace
- Installing and repairing ceilings in insulated enclosures in the workplace
- Installing architectural metalwork in the workplace
and 21 more in the full unit list below.
Free tools
Want a read on where you stand?
Three free tools, no account needed. Each one ends with a role, a level and a way in.
Learned on your own work, taught one-to-one.
Everything you just read, learned one-to-one on the job you already do. Your free first module is Future Fluency, so you can see how the teaching works before you pay for anything.
Start my free AI Fluency moduleNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.
The title, level, credits, guided learning hours and unit learning outcomes on this page are taken from the Ofqual Register of Regulated Qualifications. Contains public sector information licensed under the Open Government Licence v3.0. Where this data comes from.