Pearson Education Ltd · RQF Level 3
Pearson BTEC Level 3 National Diploma in Engineering
You don’t just earn this. You learn to use it, one-to-one, on your own real work.
- LevelRQF Level 3
- Guided learning720 hours
- Units in this qualification51
Awarded by Pearson Education Ltd · on the Ofqual register
Start here
See how this course maps onto your role
Ten quick questions, one per Future Fluency, asked against this qualification rather than a generic one.
Check my fluency, free
About 5 minutes · No card · Nothing to commit to
What you’ll learn
What each unit actually teaches you to do
BTEC Nationals are level 3 vocational qualifications that provide specialist, work-related learning in a range of sectors.
These are the units Pearson Education Ltd registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated, and every one you earn is yours to keep.
A Specialist Engineering ProjectReal unit · Pearson Education Ltd
You'll define, plan, implement, and evaluate a specialist engineering project. The unit emphasises adherence to safety regulations, resource management, and documentation, enabling learners to meet project objectives and assess outcomes against key performance indicators.
What you'll be able to do
- Define the scope and objectives of a specialist engineering project
- Plan the stages and resources required for the engineering project
- Implement the planned engineering project, adhering to safety regulations
- Evaluate the outcomes of the engineering project against the initial objectives
- Document the entire engineering project process, including challenges and solutions
Additive Manufacturing ProcessesReal unit · Pearson Education Ltd
This unit covers the principles and technologies of additive manufacturing, including preparation of 3D models and operation and maintenance of equipment. You'll compare additive manufacturing with traditional methods and understand material considerations.
What you'll be able to do
- Describe the principles of additive manufacturing processes
- Identify different types of additive manufacturing technologies
- Prepare 3D models for additive manufacturing
- Operate and maintain additive manufacturing equipment
Analogue Electronic CircuitsReal unit · Pearson Education Ltd
You'll gain knowledge of analogue electronic circuits, including fundamental principles, circuit analysis using theorems and simulation, and design and construction of circuits to meet performance requirements. The unit also covers testing and troubleshooting techniques.
What you'll be able to do
- Understand the fundamental principles of analogue electronic circuits, including voltage, current, and resistance.
- Analyse the behaviour of analogue electronic circuits using circuit theorems and simulation software.
- Design and build analogue electronic circuits to meet specific performance requirements.
- Test and troubleshoot analogue electronic circuits using appropriate test equipment.
- Evaluate the performance of analogue electronic circuits and identify areas for improvement.
Applied Commercial and Quality Principles in EngineeringReal unit · Pearson Education Ltd
You'll gain knowledge of commercial operations and quality assurance within engineering. The unit covers supply chain management, contracts, quality principles, continuous improvement, and regulatory compliance, enabling learners to assess the impact of commercial decisions on engineering projects.
What you'll be able to do
- Understand the principles of commercial operations within an engineering context
- Apply quality assurance principles and practices in engineering activities
- Analyse the impact of commercial decisions on engineering projects
- Evaluate the importance of continuous improvement in engineering quality
- Understand the role of regulatory bodies and standards in engineering
Autonomous Mobile RoboticsReal unit · Pearson Education Ltd
It teaches you to investigate various autonomous mobile robots, their software and hardware components, and applications across industries. You'll develop practical skills to design and build an autonomous mobile robot to meet a client-defined activity.
What you'll be able to do
- Investigate the use of different types of autonomous mobile robot
- Investigate the software and hardware used in autonomous mobile robots
- Develop an autonomous mobile robot to complete an activity defined in a client brief
Calculus to Solve Engineering ProblemsReal unit · Pearson Education Ltd
It teaches you to understand and apply calculus concepts such as differentiation and integration to solve engineering problems. You'll model engineering systems mathematically and interpret calculus-based results for analysis and optimisation.
What you'll be able to do
- Understand the fundamental concepts of calculus
- Apply calculus techniques to solve engineering problems
- Differentiate and integrate mathematical functions relevant to engineering
- Use calculus to model and analyse engineering systems
- Interpret and evaluate the results of calculus-based calculations
- Apply calculus to optimise engineering designs and processes
Composites Manufacture and Repair ProcessesReal unit · Pearson Education Ltd
This unit covers the properties and characteristics of composite materials, various manufacturing processes, and inspection techniques. You'll learn to manufacture composite components, identify defects, and apply recognised repair methods for damaged composites.
What you'll be able to do
- Understand the properties and characteristics of composite materials
- Identify different composite manufacturing processes
- Apply appropriate techniques for manufacturing composite components
- Inspect composite components for defects and damage
- Apply recognised methods for repairing damaged composite structures
Computer Aided Design in EngineeringReal unit · Pearson Education Ltd
You'll study Computer Aided Design (CAD) principles and techniques in engineering. The unit includes creating 2D and 3D drawings, designing components and assemblies, interpreting drawings, and managing CAD files within an organisational context.
What you'll be able to do
- Understand the principles of Computer Aided Design (CAD) in engineering
- Use CAD software to create 2D and 3D engineering drawings
- Apply CAD techniques to design engineering components and assemblies
- Interpret and analyse engineering drawings produced using CAD software
- Manage and store CAD files effectively within an organisation
Computer Aided Manufacturing and PlanningReal unit · Pearson Education Ltd
You'll understand the principles of Computer Aided Manufacturing (CAM) and Computer Aided Planning (CAP), using relevant software to generate manufacturing instructions and plan processes. The unit includes evaluation of CAM and CAP effectiveness in manufacturing environments.
What you'll be able to do
- Understand the principles of Computer Aided Manufacturing (CAM)
- Understand the principles of Computer Aided Planning (CAP)
- Use CAM software to generate manufacturing instructions
- Use CAP software to plan manufacturing processes
- Evaluate the effectiveness of CAM and CAP in a manufacturing environment
Computer NetworksReal unit · Pearson Education Ltd
You'll develop an understanding of computer network concepts, topologies, protocols, and standards. The unit includes configuring and managing network devices, troubleshooting common issues, implementing security measures, and evaluating network performance.
What you'll be able to do
- Understand the fundamental concepts of computer networks
- Understand different types of network topologies and architectures
- Understand network protocols and standards
- Configure and manage network devices
- Troubleshoot common network issues
- Implement network security measures
- Evaluate the performance of a computer network
Computer ProgrammingReal unit · Pearson Education Ltd
This unit provides learners with foundational knowledge of computer programming concepts, including variables, control structures, and object-oriented principles. You'll design, develop, test, debug, and document computer programs using appropriate languages and industry standards.
What you'll be able to do
- Understand the fundamental concepts of computer programming
- Design and develop computer programs using appropriate programming languages
- Test and debug computer programs effectively
- Document computer programs according to industry standards
Computer System Principles and PracticeReal unit · Pearson Education Ltd
This unit covers fundamental computer system principles and their practical application. You'll analyse system components, evaluate performance, install and configure hardware and software, and troubleshoot common computer system issues.
What you'll be able to do
- Understand the fundamental principles of computer systems
- Apply computer system principles in practical contexts
- Analyse the components of a computer system
- Evaluate the performance of a computer system
- Troubleshoot common computer system problems
Computer Systems SecurityReal unit · Pearson Education Ltd
You'll gain knowledge of computer systems security principles, including confidentiality, integrity, and availability. The unit covers identification of security threats, implementation and evaluation of protective measures, and relevant legal considerations.
What you'll be able to do
- Understand the fundamental principles of computer systems security
- Identify potential security threats and vulnerabilities in computer systems
- Implement security measures to protect computer systems from threats
- Evaluate the effectiveness of security measures implemented
- Understand relevant legislation and ethical considerations related to computer systems security
Computer Systems Support and PerformanceReal unit · Pearson Education Ltd
You'll explore computer systems architecture, support principles, and performance optimisation. The unit includes understanding hardware and software components, operating systems, types of computer systems, and practical skills in providing support and monitoring system performance.
What you'll be able to do
- Understand the architecture of computer systems
- Understand the principles of computer systems support
- Understand how to optimise computer systems performance
- Provide computer systems support
- Monitor and improve computer systems performance
Delivery of Engineering Processes Safely as a TeamReal unit · Pearson Education Ltd
You'll explore the importance of safety within engineering processes and develop the ability to identify hazards and apply safe working practices. The unit also emphasises effective teamwork and communication skills in delivering engineering projects safely.
What you'll be able to do
- Understand the importance of safety in engineering processes
- Identify potential hazards and risks associated with engineering activities
- Apply safe working practices and procedures in an engineering environment
- Demonstrate effective teamwork and communication skills in engineering projects
- Contribute to the safe delivery of engineering processes as part of a team
- Evaluate the effectiveness of team working in ensuring safety
Digital and Analogue Electronic SystemsReal unit · Pearson Education Ltd
You'll gain knowledge of digital and analogue electronic systems, analysing component characteristics and designing, constructing, testing, and evaluating electronic circuits. The unit covers fundamental principles and practical skills for both system types.
What you'll be able to do
- Understand the principles of digital electronic systems
- Understand the principles of analogue electronic systems
- Analyse the characteristics of digital electronic components
- Analyse the characteristics of analogue electronic components
- Design and construct digital electronic circuits
- Design and construct analogue electronic circuits
- Test and evaluate the performance of digital and analogue electronic systems
Dynamic Mechanical Principles in PracticeReal unit · Pearson Education Ltd
This unit covers the fundamental principles of dynamic mechanical systems, including force, mass, acceleration, momentum, energy conservation, damping, and resonance. You'll apply mathematical analysis and use appropriate tools to investigate and interpret the behaviour of dynamic mechanical systems in practice.
What you'll be able to do
- Understand the fundamental principles of dynamic mechanical systems
- Apply mathematical principles to analyse dynamic mechanical systems
- Investigate the behaviour of dynamic mechanical systems in practice
- Use appropriate tools and equipment to measure and analyse dynamic mechanical properties
- Interpret data and draw conclusions about the performance of dynamic mechanical systems
- Apply knowledge of dynamic mechanical principles to solve practical engineering problems
Electrical Installation of Hardware and CablesReal unit · Pearson Education Ltd
You'll gain knowledge of regulations, standards, hardware, and cables used in electrical installations. The unit covers planning, installation, testing, and commissioning of electrical hardware and cables in compliance with safety and regulatory requirements.
What you'll be able to do
- Understand the regulations and standards for electrical installations
- Understand the types of hardware used in electrical installations
- Understand the types of cables used in electrical installations
- Plan the installation of electrical hardware and cables
- Install electrical hardware according to specifications
- Install electrical cables according to specifications
- Test and inspect electrical installations to ensure safety and compliance
Electrical MachinesReal unit · Pearson Education Ltd
This unit provides an understanding of electrical machines, including DC, AC synchronous, and AC induction machines. You'll analyse construction, characteristics, performance, and apply control methods for speed and torque, as well as understand maintenance requirements.
What you'll be able to do
- Understand the principles of operation of different types of electrical machines
- Analyse the construction and characteristics of electrical machines
- Evaluate the performance of electrical machines under various operating conditions
- Apply methods for controlling the speed and torque of electrical machines
- Understand the maintenance requirements for electrical machines
Electrical Power Distribution and TransmissionReal unit · Pearson Education Ltd
This unit provides learners with knowledge of electrical power distribution and transmission systems, including their components, operation, and voltage levels. You'll analyse factors affecting system efficiency and reliability and apply safety regulations relevant to power networks.
What you'll be able to do
- Understand the principles of electrical power distribution and transmission systems.
- Explain the components and operation of electrical power distribution and transmission networks.
- Analyse the factors affecting the efficiency and reliability of electrical power distribution and transmission.
- Apply relevant safety regulations and procedures for working with electrical power distribution and transmission equipment.
- Evaluate the environmental impact of electrical power distribution and transmission systems and identify sustainable solutions.
Electronic Devices and CircuitsReal unit · Pearson Education Ltd
It teaches you to understand electronic component characteristics and circuit behaviour. You'll construct, test, analyse, design, and troubleshoot basic electronic circuits, applying principles of circuit design and functionality.
What you'll be able to do
- Understand the characteristics of different electronic components
- Construct and test basic electronic circuits
- Analyse the behaviour of electronic circuits
- Understand the principles of circuit design
- Troubleshoot electronic circuits
Electronic Measurement and Testing of CircuitsReal unit · Pearson Education Ltd
This unit provides learners with knowledge of electronic measurement and testing principles, including voltage, current, and resistance. You'll perform measurements and tests on circuits, analyse results, and identify faults to ensure correct operation.
What you'll be able to do
- Understand the principles of electronic measurement
- Understand the principles of electronic testing of circuits
- Perform electronic measurements on circuits
- Perform electronic testing of circuits
- Analyse the results of electronic measurements and testing
Electronic Printed Circuit Board Design and ManufactureReal unit · Pearson Education Ltd
This unit focuses on electronic printed circuit board (PCB) design and manufacture. You'll understand PCB design principles, use CAD software, select components, prepare designs for manufacture, assemble components, and test and inspect finished PCBs.
What you'll be able to do
- Understand the principles of electronic printed circuit board (PCB) design
- Understand the PCB manufacturing process
- Use CAD software to design PCBs
- Select appropriate components for PCB design
- Prepare PCB designs for manufacture
- Assemble electronic components onto PCBs
- Test and inspect manufactured PCBs
Energy ManagementReal unit · Pearson Education Ltd
You'll gain knowledge and skills in energy management, including planning and conducting energy audits. The unit covers monitoring and targeting energy savings to support improved energy efficiency within organisations.
What you'll be able to do
- Know about energy management
- Plan for an energy management audit
- Conduct an energy management audit
- Understand how to monitor and target energy savings
Engineering Maintenance and Condition Monitoring TechniquesReal unit · Pearson Education Ltd
You'll study engineering maintenance principles and condition monitoring techniques. They will identify maintenance strategies, apply monitoring methods to assess equipment health, analyse data to predict failures, and implement maintenance procedures to ensure reliability.
What you'll be able to do
- Understand the principles of engineering maintenance
- Identify different types of maintenance strategies
- Apply condition monitoring techniques to assess the health of engineering equipment
- Analyse condition monitoring data to predict potential failures
- Implement maintenance procedures to ensure the reliable operation of engineering systems
Engineering PrinciplesReal unit · Pearson Education Ltd
You'll study fundamental mechanical, electrical, and thermal engineering principles, including force, motion, energy, electrical laws, and material properties. The unit supports application of these principles to solve practical engineering problems and interpret technical drawings.
What you'll be able to do
- Understand fundamental mechanical principles
- Understand fundamental electrical principles
- Understand fundamental thermal principles
- Apply engineering principles to solve practical problems
- Understand the properties of engineering materials
- Interpret engineering drawings and diagrams
Engineering Product Design and ManufactureReal unit · Pearson Education Ltd
This unit covers the engineering product design process from concept to prototype. You'll apply design principles, evaluate manufacturing methods, create detailed drawings, and analyse the performance of manufactured prototypes.
What you'll be able to do
- Understand the principles of engineering product design
- Apply the product design process from concept to prototype
- Evaluate different manufacturing processes for engineering products
- Create detailed engineering drawings and specifications
- Manufacture a prototype of an engineering product
- Analyse and evaluate the performance of the manufactured product against design specifications
Fabrication Manufacturing ProcessesReal unit · Pearson Education Ltd
You'll develop an understanding of various fabrication manufacturing processes such as cutting, forming, joining, and finishing. The unit covers the principles, characteristics, applications, and evaluation of these processes to enable effective selection and use in manufacturing contexts.
What you'll be able to do
- Understand different fabrication manufacturing processes
- Understand the principles of different fabrication manufacturing processes
- Apply fabrication manufacturing processes
- Evaluate the application of fabrication manufacturing processes
Further Engineering MathematicsReal unit · Pearson Education Ltd
You'll apply algebraic, trigonometric, calculus, and statistical methods to solve engineering problems. The unit focuses on mathematical techniques for analysing data and determining solutions within practical engineering contexts.
What you'll be able to do
- Apply algebraic techniques to solve engineering problems
- Apply trigonometric methods to solve engineering problems
- Utilise calculus to solve engineering problems
- Apply statistical methods to analyse engineering data
Industrial RoboticsReal unit · Pearson Education Ltd
This unit investigates industrial robotics, covering health and safety, maintenance, operation, design, sensors, end effectors, and programming. You'll develop a programme for an industrial robot to address an engineering problem.
What you'll be able to do
- Investigate the health and safety and maintenance requirements associated with industrial robots
- Investigate the operation and design of industrial robots for different applications
- Investigate the operation of industrial robot sensors and end effectors
- Produce a program for an industrial robot to solve an engineering problem
Maintenance of Mechanical SystemsReal unit · Pearson Education Ltd
You'll study maintenance principles for mechanical systems, including preventative and corrective maintenance. The unit covers fault identification, diagnosis, repair techniques, and practical skills for maintaining mechanical system reliability.
What you'll be able to do
- Understand the principles of mechanical system maintenance, including preventative and corrective maintenance.
- Identify common mechanical system faults and their causes.
- Apply appropriate maintenance techniques to diagnose and repair mechanical system faults.
- Demonstrate practical skills in the maintenance of mechanical systems, including lubrication, alignment, and component replacement.
- Evaluate the effectiveness of maintenance procedures and recommend improvements.
Manufacturing Computer Numerical Control Machining ProcessesReal unit · Pearson Education Ltd
This unit examines Computer Numerical Control (CNC) machining processes in manufacturing. You'll understand principles, machine types, setup, operation, programming, and analyse quality control and health and safety considerations.
What you'll be able to do
- Understand the principles of Computer Numerical Control (CNC) machining processes in manufacturing
- Describe the different types of CNC machines used in manufacturing
- Explain the process of setting up and operating CNC machines
- Apply CNC programming techniques to manufacture components
- Analyse the quality control procedures used in CNC machining
- Evaluate the health and safety requirements when working with CNC machines
Manufacturing Joining, Finishing and Assembly ProcessesReal unit · Pearson Education Ltd
This unit covers manufacturing joining, finishing, and assembly processes. You'll identify and apply appropriate joining and finishing techniques, understand assembly methods, and appreciate the role of quality control in manufacturing operations.
What you'll be able to do
- Understand different manufacturing joining processes
- Understand different manufacturing finishing processes
- Understand different manufacturing assembly processes
- Apply appropriate joining techniques to manufacturing processes
- Apply appropriate finishing techniques to manufacturing processes
- Apply appropriate assembly techniques to manufacturing processes
- Understand the importance of quality control in joining, finishing and assembly processes
Manufacturing Primary Forming ProcessesReal unit · Pearson Education Ltd
This unit examines primary forming processes in manufacturing such as casting, forging, and extrusion. You'll understand the principles, techniques, and solidification processes involved, and analyse the advantages and disadvantages of these methods for specific applications.
What you'll be able to do
- Understand the range of primary forming processes used in manufacturing, including casting, forging, and extrusion.
- Explain the principles and techniques involved in each primary forming process.
- Analyse the advantages and disadvantages of different primary forming processes for specific applications.
- Evaluate the impact of primary forming processes on material properties and product quality.
- Apply health and safety procedures relevant to manufacturing primary forming processes.
Manufacturing Secondary Machining ProcessesReal unit · Pearson Education Ltd
This unit provides learners with an understanding of secondary machining processes, including setup, operation, and quality control. You'll perform machining operations such as drilling and tapping to specified tolerances using appropriate equipment.
What you'll be able to do
- Understand the principles of secondary machining processes
- Set up and operate secondary machining equipment
- Perform secondary machining operations to specified tolerances
- Understand quality control procedures in secondary machining
Mechanical Behaviour of Metallic MaterialsReal unit · Pearson Education Ltd
This unit covers the mechanical behaviour of metallic materials, including elastic and plastic deformation, fracture, tensile strength, yield strength, ductility, creep, and fatigue. You'll understand how factors such as temperature and grain size influence these properties and will analyse material performance under various loading conditions.
What you'll be able to do
- Describe the different types of mechanical behaviour exhibited by metallic materials
- Explain the factors that influence the mechanical behaviour of metallic materials
- Analyse the properties of metallic materials under different loading conditions
- Evaluate the suitability of different metallic materials for specific engineering applications
Mechanical Behaviour of Non-Metallic MaterialsReal unit · Pearson Education Ltd
You'll study the mechanical behaviour of non-metallic materials, including deformation, strength, and time-dependent properties. The unit covers factors influencing behaviour, analysis under different loading conditions, and evaluation of material suitability for engineering applications.
What you'll be able to do
- Describe the different types of mechanical behaviour exhibited by non-metallic materials
- Explain the factors that influence the mechanical behaviour of non-metallic materials
- Analyse the properties of non-metallic materials under different loading conditions
- Evaluate the suitability of different non-metallic materials for specific engineering applications
Mechanical Measurement and Inspection TechnologyReal unit · Pearson Education Ltd
This unit introduces the principles of mechanical measurement and inspection technology. You'll develop skills in using measurement instruments, performing inspections, identifying errors, and analysing results to ensure component quality and detect defects.
What you'll be able to do
- Understand the principles of mechanical measurement
- Understand the principles of mechanical inspection technology
- Perform mechanical measurements
- Perform mechanical inspections
- Analyse the results of mechanical measurements and inspections
Modern Manufacturing SystemsReal unit · Pearson Education Ltd
This unit covers the principles, types, and components of modern manufacturing systems, including lean and agile methodologies. You'll analyse system performance and understand the role of automation and quality control within contemporary manufacturing.
What you'll be able to do
- Understand the principles of modern manufacturing systems
- Investigate different types of modern manufacturing systems
- Analyse the components of a modern manufacturing system
- Evaluate the performance of a modern manufacturing system
- Understand the role of automation in modern manufacturing systems
- Understand the importance of quality control in modern manufacturing systems
Pneumatic and Hydraulic SystemsReal unit · Pearson Education Ltd
This unit introduces the fundamental principles and components of pneumatic and hydraulic systems. You'll analyse system operation, apply safe working practices, and carry out maintenance procedures relevant to these fluid power systems.
What you'll be able to do
- Understand the fundamental principles of pneumatic systems
- Understand the fundamental principles of hydraulic systems
- Analyse the components used in pneumatic systems
- Analyse the components used in hydraulic systems
- Apply safe working practices when working with pneumatic and hydraulic systems
- Evaluate the performance of pneumatic systems
- Evaluate the performance of hydraulic systems
- Maintain pneumatic systems
- Maintain hydraulic systems
Power and Energy ElectronicsReal unit · Pearson Education Ltd
You'll study the principles of power and energy electronics, including component characteristics and applications. The unit covers design and simulation of power and energy electronic circuits, enabling learners to build and test relevant electronic systems.
What you'll be able to do
- Understand the principles of power electronics
- Understand the principles of energy electronics
- Analyse the characteristics of power electronic components
- Analyse the characteristics of energy electronic components
- Design and simulate power electronic circuits
- Design and simulate energy electronic circuits
- Build and test power and energy electronic systems
Principles and Applications of Fluid MechanicsReal unit · Pearson Education Ltd
You'll study the fundamental principles of fluid mechanics, including fluid properties and flow behaviour. The unit covers analysis of fluid flow in engineering systems and evaluation of fluid mechanics applications across various engineering contexts.
What you'll be able to do
- Understand the fundamental principles of fluid mechanics
- Explain the properties of fluids and their behaviour under different conditions
- Apply fluid mechanics principles to solve engineering problems
- Analyse fluid flow in various engineering systems
- Evaluate the applications of fluid mechanics in different engineering contexts
- Use appropriate tools and techniques to measure fluid properties
Principles of Electrical MachinesReal unit · Pearson Education Ltd
You'll explore the construction, operation, and applications of DC and AC electrical machines in industry. The unit includes investigation of control circuitry and systems, enabling learners to analyse machine characteristics and operational safety.
What you'll be able to do
- Investigate the operation of direct current (DC) electrical machines as used in industry
- Analyse the applications of direct current (DC) electrical machines as used in industry
- Investigate the operation of alternating current (AC) electrical machines as used in industry
- Analyse the applications of alternating current (AC) electrical machines as used in industry
- Investigate how electrical machine control circuitry operates safely
- Investigate how electrical machine control systems operate safely
Programmable Logic ControllersReal unit · Pearson Education Ltd
This unit covers the fundamentals of Programmable Logic Controllers (PLCs), including system components, programming, testing, troubleshooting, and application in industrial automation. You'll learn to implement and maintain PLC control systems.
What you'll be able to do
- Understand the fundamental principles of Programmable Logic Controllers (PLCs)
- Identify the key components and architecture of a PLC system
- Develop and implement basic PLC programs using appropriate programming languages
- Test and troubleshoot PLC programs to ensure correct functionality
- Apply PLC systems to control engineering processes
Static Mechanical Principles in PracticeReal unit · Pearson Education Ltd
You'll study fundamental static mechanical principles including forces, moments, and equilibrium. The unit develops skills in analysing structural behaviour under load, applying engineering standards, and evaluating material suitability for static applications.
What you'll be able to do
- Understand the fundamental principles of static mechanics, including forces, moments, and equilibrium.
- Apply static mechanical principles to analyse the behaviour of structures and components under load.
- Demonstrate practical skills in measuring and calculating static mechanical properties.
- Interpret and apply relevant engineering standards and codes of practice related to static mechanics.
- Evaluate the suitability of different materials for static mechanical applications.
Sustainable TransportReal unit · Pearson Education Ltd
You'll investigate the sustainability of alternative power sources for transport vehicles and the benefits of reducing travel distances. The unit also explores how incentives, penalties, and barriers influence demand for sustainable transport solutions.
What you'll be able to do
- Investigate the sustainability of alternative power sources for transport vehicles
- Investigate the wider benefits of reducing the distance travelled by transport vehicles
- Investigate how barriers to use, incentives and penalties could affect the demand for sustainable vehicle transport
- Investigate ways to improve the sustainability of leisure travel
Thermodynamic Principles and PracticeReal unit · Pearson Education Ltd
This unit provides a comprehensive understanding of thermodynamic principles and their application in engineering. You'll apply thermodynamic laws to analyse systems, calculate properties, evaluate cycles, and support design and operation of engineering equipment.
What you'll be able to do
- Understand the fundamental principles of thermodynamics
- Apply thermodynamic laws to analyse engineering systems
- Calculate thermodynamic properties of substances
- Analyse thermodynamic cycles and processes
- Apply thermodynamic principles to the design and operation of engineering equipment
Three Phase Electrical SystemsReal unit · Pearson Education Ltd
It teaches you to understand the principles and advantages of three-phase electrical systems, analyse three-phase circuits, and evaluate electrical machine performance. Safety procedures for working with three-phase systems are also covered.
What you'll be able to do
- Explain the principles of three-phase electrical systems
- Analyse three-phase circuits using appropriate methods
- Evaluate the performance of three-phase electrical machines
- Apply safety procedures when working with three-phase systems
Website Production to Control DevicesReal unit · Pearson Education Ltd
This unit covers the principles of website production with a focus on designing, developing, testing, and evaluating websites that control devices. You'll understand the stages of website creation and apply skills to produce functional control interfaces.
What you'll be able to do
- Understand the principles of website production
- Design a website to control devices
- Develop a website to control devices
- Test a website to control devices
- Evaluate the performance of a website to control devices
Welding TechnologyReal unit · Pearson Education Ltd
You'll understand various welding techniques, material preparation, and welding operations using different methods. The unit emphasises safety procedures and quality inspection and testing of welds to ensure compliance with industry requirements.
What you'll be able to do
- Understand different welding techniques and their applications
- Prepare materials for welding
- Perform welding operations using different techniques
- Understand the importance of safety procedures in welding
- Inspect and test welds for quality
Work Experience in the Engineering SectorReal unit · Pearson Education Ltd
You'll understand the requirements for work experience in the engineering sector, including planning and preparation. The unit develops professional behaviour, reflection on experience, and awareness of health and safety regulations in the workplace.
What you'll be able to do
- Understand the requirements for work experience in the engineering sector
- Plan and prepare for a work experience placement
- Demonstrate professional behaviour in the workplace
- Reflect on and evaluate work experience
- Understand health and safety regulations in an engineering environment
The honest bit
You’ve started things before
Most courses were built for a room full of people who aren’t you. A cohort moves on whether or not your week allowed it, and by the third week the thing you’re behind on becomes the reason you stop opening it.
There’s no cohort here, and no timetable to fall behind. Before anything starts, Zavmo asks when you’re sharpest and how long you can realistically sit down for, then builds the sessions around those answers. A bad fortnight changes your pace. It doesn’t put you behind.
And you only pay once you start learning. Searching and planning are free, and you can cancel any time — so the cost of finding out is an afternoon, not a year.
Your passport
Every credit is a stamp you keep
Level 3 credits are regulated. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you’ve earned and what’s next.
A Specialist Engineering ProjectAdditive Manufacturing ProcessesAnalogue Electronic CircuitsApplied Commercial and Quality Principles in EngineeringAutonomous Mobile RoboticsCalculus to Solve Engineering ProblemsComposites Manufacture and Repair ProcessesComputer Aided Design in Engineering
Each stamp is a real unit registered against this qualification.
Who’d teach you this
The Evidence Evaluator
Assessor
Helps you show what you can actually do, gathering the evidence that proves it as you learn.
Meet all twelve tutorsWhere this connects
Where these credits take you
A qualification is never a dead end here. See the jobs its credits open, the national occupational standards its units map to, and the future skills they quietly build.
Skills it covers
What the job actually needs. These are the standards the units are built against, in the words employers and awarding bodies already use for the work itself.
Maintenance and repair of mechanical hard facilities systemsMonitor and evaluate the maintenance of broadcast and media equipment and systems
How you’ll actually learn this
One-to-one, on your own real work
A qualification is usually something done to you: sit the class, sit the exam, hope it sticks. Here it’s the opposite. You learn it one-to-one with a companion, on your own real work, and you keep going until you can use it, not just recall it.
One-to-one, on your real workNo lectures, no past-papers. Every unit is practised on the actual tasks your job throws at you, a tutor beside you, not a video in front of you.
Taught to the top, not the testMost courses stop at remembering. Your companion keeps climbing: analysing, judging, creating. That’s the part a machine can’t do for you.
Credits you keep, a map that continuesEvery unit is regulated and yours for good. The day you finish, Zavmo already knows the next role your new credits open.
Applied to your own work
Learners will define, plan, implement, and evaluate a specialist engineering project. The unit emphasises adherence to safety regulations, resource management, and documentation, enabling learners to meet project objectives and assess outcomes against key performance indicators.
How the thinking builds
- Remember
- Understand
- Apply
- Analyse
- Evaluate
- Create
Built for Pearson BTEC Level 3 National Diploma in Engineering
51 units in this credential, in the order it lists them, awarded by Pearson Education Ltd.
- A Specialist Engineering Project
- Additive Manufacturing Processes
- Analogue Electronic Circuits
- Applied Commercial and Quality Principles in Engineering
- Autonomous Mobile Robotics
- Calculus to Solve Engineering Problems
and 45 more in the full unit list below.
One to one, not one to many
No two people run this the same way
A course is written once and handed to everyone. This is assembled around you, and keeps changing as it learns you. Five things it reads, and what each one changes.
- Your actual work Every unit is taught against a live piece of your own work, not a worked example from a textbook.
- What you already know The first conversation finds your starting point, so you skip what you can already do and spend the time on what you cannot.
- The conditions you learn under Not a learning-styles quiz. The evidence does not support those. The dimensions the research does back, read once and used to shape the plan.
- How far you got last time It picks up mid-thought. The tutor knows what you said, what you struggled with, and what it asked you to try.
- Which tutor suits the moment Twelve of them, each for a different kind of thinking. The one who walks you through a first idea is not the one who stress-tests it.
See how you learn, free. Eight questions, no sign-up. A directional taster; the diagnostic inside Zavmo goes deeper and keeps adapting.
Why it sticks
Most courses stop at remembering
There’s a well-known ladder of how deeply you learn something, called Bloom’s Taxonomy. Most courses get you up the first two rungs: you remember some facts, you pass a test, you forget it. Real skill lives at the top. Judging, deciding, creating. And this isn’t a generic ladder: every rung has a named Zavmo tutor who walks you up it.
- 6CreateThe Creative Catalyst
- 5EvaluateThe Evidence Evaluator
- 4AnalyseThe Analyst
- 3ApplyThe Coach
- 2UnderstandThe Connector
- 1RememberThe Builder
Where most courses leave you Where Zavmo takes you
Why this matters: AI can already remember and understand for you. What it can’t do is
take your real problem and judge the right call. So the only learning worth paying
for is the learning that takes you to the top. That’s exactly what a tutor doing it with
you, on your real work, is for.
The value
Why the companion is worth £70 a month
You’re not paying for the units. They’re regulated, and the same wherever you earn them. You’re paying for the one thing that decides whether you actually get there: a companion that makes them stick, on your real work.
That is one-to-one on this qualification, every day, on the work you already do, for £70 a month. Your first module is free, so you can see the teaching before you pay for any of it. Billed monthly, cancel any time and billing stops.
Earned on your own work, taught to the top.
Everything you just read, learned one-to-one on the job you already do. Your first module is free, so you can see the teaching before you pay for any of it.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.