How you’d get it
How you’d get this certificate
- Zavmo teaches you. You learn the units one-to-one with an AI tutor, on your own work.
- You register with an approved centre. That is a college, training provider or employer GQA Qualifications Limited has approved to offer this qualification. Zavmo is not an approved centre, so you register with them, not with us.
- The centre assesses, and GQA Qualifications Limited awards. A qualified assessor at the centre judges your evidence, and the certificate comes from GQA Qualifications Limited.
01What it is
The Level 3 Diploma is an occupational qualification for the building and construction sector. It allows learners to develop skills in the surveying and installation of windows, doors, and conservatories. Learners will gain knowledge of relevant building regulations and health and safety requirements.
These are the units GQA Qualifications Limited registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated. Zavmo teaches towards them on your own work, and work done here is recognised as prior learning under the agreements we hold.
Zavmo is not an awarding body, is not an approved centre, and is not affiliated with GQA Qualifications Limited. It does the teaching and the mapping. GQA Qualifications Limited sets this qualification and awards it, and a qualified human assessor makes the assessment decision.
Free first step
Try a free Future Fluency lesson first
The free part is a Future Fluency lesson on using AI at work. It is not part of this qualification. Next, a free account. We build your plan for this qualification as you set up. Teaching towards this qualification begins when you subscribe.
No card · Nothing to commit to
02The units
What each unit actually teaches you to do
Assess the Quality of Materials / Components in a Glass or Glass Related Working Environment Real unit · GQA Qualifications Limited
This unit covers the assessment of quantity, quality, and type of glass and related materials. You'll check materials against specifications, recognise quality variations, and understand appropriate corrective actions to maintain standards.
What you'll be able to do
- Identify the quantity, quality and type of glass and glass related materials/components needed.
- Check that the quantity, quality and type of glass and glass related materials match the specifications.
- Know the types of variations in quality that can occur and how to recognise these variations.
- Identify the causes of variation in quality.
- Know the corrective actions to be carried out when a variation in quality is identified.
- Know when and where to obtain expert assistance to help identify causes of variation in quality.
- Make recommendations to correct variations in quality.
Communicating and Working with Others in the Glass and Related Working Environments Real unit · GQA Qualifications Limited
You'll develop communication and teamwork skills within glass and related working environments. The unit covers effective information sharing, prompt response to requests, and the importance of maintaining positive working relationships with colleagues.
What you'll be able to do
- Describe what information to share with colleagues on your job role and why this is important
- Share information with colleagues
- Explain why it is important to respond promptly to requests
- Respond promptly to requests from colleagues
- Explain why good working relationships with colleagues are important and how barriers to this can be overcome
- Develop and maintain good working relationships with colleagues
Control the installation of windows and doors, or conservatories or curtain walling Real unit · GQA Qualifications Limited
This unit develops learners' ability to control installation work for windows, doors, conservatories, or curtain walling. You'll prepare for installation control, assess installers' skills and qualifications, and manage activities to ensure compliance with specifications.
What you'll be able to do
- Prepare for controlling installation work
- Determine if the Installers have the necessary skills, qualifications and licences
- Prepare for controlling installation work
- Control installation activities to ensure that the work is carried out according to specification
- Identify and overcome problems in controlling the installation
- Know why it is important to record clear and concise information on the installation activity
- Record clear and concise information on the installation activity
Dealing with Environmental matters in the glass and glass related working environment Real unit · GQA Qualifications Limited
You'll understand environmental impacts of workplace activities in glass-related environments and relevant legislation. The unit covers methods to minimise environmental harm, recycling practices, and compliance with environmental legal requirements.
What you'll be able to do
- Know the workplace activities that could have an environmental impact.
- Know the legal requirements regarding the environmental impact of work activities.
- Deal with the environmental aspects of their job role.
- Know the products that can be re-cycled.
- Comply with environmental legislation, Company environmental policies and procedures.
- Know the operational issues that may arise with following Company environmental policies.
Ensure Resources are Available to Meet Work Requirements in a Glass or Glass Related Working Environment Real unit · GQA Qualifications Limited
You'll develop the ability to accurately identify work requirements and select appropriate resources in glass or glass-related working environments. The unit includes obtaining resources, devising work schedules, and monitoring progress to ensure efficient task completion.
What you'll be able to do
- Accurately identify work requirements.
- Accurately identify work requirements.
- Select the correct option for achieving work requirements and the resources required for this.
- Obtain the resources required to do the work.
- Devise a schedule of work and select the resources for each work task.
- Monitor and guide the progress of work, the use of materials and the use of manpower/skills.
- Overcome problems in the use of resources to meet work requirements.
- Record information on the progress of work.
Identify Fenestration installation requirements Real unit · GQA Qualifications Limited
You'll learn to identify fenestration installation requirements by gathering and providing accurate information to customers. The unit covers recognising potential structural issues, understanding relevant Building Regulations, and addressing installation challenges.
What you'll be able to do
- Identify the type of information that needs to be obtained from the customer.
- Identify the type of information that needs to be given to the customer.
- Identify any potential problems with the existing structural conditions.
- Describe how to deal with potential problems with existing structural conditions.
- Identify Building Regulations that are relevant to the proposed work.
- Identify where to find information on relevant Building Regulations.
- Describe how to ensure that work can be carried out to the satisfaction of the customer.
- Describe how to ensure that work complies with legislation, guidelines and codes of practice.
- Identify what measurements should be recorded.
- Identify what tolerances should be recorded.
- Identify what other information should be recorded.
- Identify the features of the building that can have an effect on how the measurements are obtained.
- Describe the difficulties that building features can cause when obtaining measurements.
- Describe how to minimise any potential problems caused by obtaining measurements on buildings with specific features.
- Identify the types of problems that can arise from hidden detail when carrying out surveying.
- Describe how to deal with problems that can arise from hidden detail when carrying out surveying.
- Identify the types of ancillary products that may be required.
- Explain why ancillary products may be required.
- Obtain and record all necessary information to enable effective specifications to be completed.
- Identify the type of information that customers require.
- Explain why the information is important to customers.
- Give customers all necessary information.
- Describe what should happen with the information obtained.
- Ensure the information obtained is dealt with correctly.
Identify and Rectify Technical Problems in a Glass or Glass Related Working Environment Real unit · GQA Qualifications Limited
You'll identify and investigate technical problems in glass or glass-related environments. The unit includes methods for problem investigation, recognising causes, obtaining expert assistance, and adhering to safety procedures during problem resolution.
What you'll be able to do
- Know the types of technical problems that can occur in a glass or glass related working environment and how to investigate them.
- Investigate a technical problem to identify the problem, its location and likely causes.
- Know when and how to obtain expert assistance to help identify technical problems.
- Rectify the technical problem.
- Ensure that the technical problem has been rectified.
- Overcome problems in the identification and rectification of technical problems.
- Record technical problems, their location and rectification and how to inform people who need to know about this.
Install Bay Windows Real unit · GQA Qualifications Limited
It teaches you to install bay windows in compliance with Building Regulations. You'll handle, cut, and assemble materials safely, understand structural requirements including bearing plates, and appreciate the importance of regulatory compliance.
What you'll be able to do
- Know which parts of the Building Regulations relate to the structural aspect of the installation of Bay Windows and how they apply in practice
- Handle, cut and assemble materials correctly and safely
- Know what bearing plates are and when they should be used
- Know why it is important for the load to be transmitted correctly from and to the building structure and the bay pole assembly, and how to ensure this happens
- Ensure that others involved in the process carry out the required actions
- Know different methods of securing installation materials to different types of structure
- Handle and position installation materials correctly
- Securely fix the installation materials to the structure using the correct tools, equipment and fixings safely
- Know the correct weatherproofing materials for different types of installations
- Apply the specified materials safely to provide a weatherproof installation
- Know why it is important to have drainage holes clear and functioning
- Ensure drainage holes are clear and functioning
- Ensure that windows are plumb after being secured, and that they function correctly
- Overcome problems in the installation
- Know the different types of materials that can be used for internal and external finishes
- Finish off the work to specification
- Complete documentation related to the installation in accordance with company requirements
Install Conservatories Real unit · GQA Qualifications Limited
You'll gain knowledge and skills to install conservatories, including identifying materials, preparing installation sites, erecting structures to specification, applying weatherproofing, and ensuring the completed installation meets quality standards.
What you'll be able to do
- Identify the different types of materials that are used and their functions.
- Ensure that the installation site and all surfaces are prepared to specification.
- Position, erect and join the materials for the structure according to specification.
- Explain why it is important to keep drainage holes clear and functioning and how to do this.
- Select and correctly apply specified materials for weatherproofing.
- Ensure that units are plumb and functioning correctly after being secured.
- Describe how to agree the new position of fixtures and fittings with the customer.
- Install and restore fixtures, fittings and surface finishes.
- Ensure that the work is finished to specified requirements and to the customer’s satisfaction.
- Identify and overcome problems in the installation of conservatories.
- Record information on the installation of conservatories.
Install Glass and / or Panels into Windows and Doors Real unit · GQA Qualifications Limited
You'll learn to install glass and panels securely into windows and doors. The unit emphasises the importance of clear drainage holes, correct use of installation products, ensuring panels are plumb, and applying weatherproof materials effectively.
What you'll be able to do
- Know why it is important for drainage holes to be clear and functioning.
- Ensure that drainage holes are clear and functioning.
- Know the different installation products that may be used.
- Fit glass or panels correctly and securely into apertures.
- Ensure that glass and/or panels are plumb after being secured.
- Apply specified materials correctly to provide a weatherproof installation.
- Finish off the work to specification and carry out a final inspection.
- Identify and overcome problems in relation to the installation work.
Install Windows and Doors Real unit · GQA Qualifications Limited
You'll develop practical skills in handling, positioning, and securely fixing windows and doors using appropriate methods for different structures. The unit also covers the selection and application of suitable weatherproofing materials to ensure effective installation.
What you'll be able to do
- Handle and position installation materials correctly, following safety guidelines and manufacturer's instructions.
- Describe different methods of securing installation materials to different types of structure.
- Securely fix the installation materials to the structure, using appropriate methods and fixings.
- Identify the correct weatherproofing materials for different types of window and door installations.
- Apply the specified materials to provide a weatherproof installation, ensuring a proper seal.
- Explain why it is important to ensure drainage holes are clear and functioning in window and door installations.
- Ensure drainage holes are clear and functioning to prevent water ingress.
- Ensure that window and door units are plumb after being secured, and that they function correctly (e.g., open and close smoothly).
- Describe how to overcome problems encountered during the installation process.
- Finish off the work to the specified standard, ensuring a professional and aesthetically pleasing result.
Maintain / Repair Windows and Doors or Conservatories Real unit · GQA Qualifications Limited
You'll identify maintenance and repair requirements for windows, doors, and conservatories, selecting suitable methods and equipment. The unit includes safe handling of dangerous materials and the use of structural supports during dismantling and repair.
What you'll be able to do
- Identify the requirements of the maintenance work.
- Identify what methods and equipment are necessary to deal with requirements.
- Explain what actions should be taken if dangerous materials are exposed during dismantling.
- Identify which structural supports should be used for different installations.
- Remove and store fixtures and fittings that prevent or restrict maintenance / repair activities.
- Remove materials from the installation, causing minimum damage to the surrounding structure, and safely remove and dispose of debris.
- Undertake maintenance / repair to the required standard.
- Explain how to ensure that the maintenance / repair meets customer requirements.
- Correctly remove any structural supports that were used.
- Apply finishing materials correctly.
- Replace fixtures and fittings.
- Ensure glazing components function correctly.
- Explain why it is important to remove materials and debris from site after completing all work.
- Remove materials and debris from site after completing all work.
- Identify the type of problems that can occur with maintenance work and how to overcome them.
Maintain Health and Safety in the Fenestration Installation Working Environment Real unit · GQA Qualifications Limited
This unit provides learners with an understanding of health and safety legislation relevant to fenestration installation. You'll be able to conduct hazard and risk assessments, identify workplace hazards, and implement safe working practices to maintain compliance.
What you'll be able to do
- Identify the relevant acts, regulations, and guidelines that apply to the fenestration installation environment.
- Explain how the relevant acts, regulations and guidelines apply in practice within a fenestration installation environment.
- Describe how to carry out an assessment of hazards and risks in the fenestration installation working environment.
- Identify the types of hazards or risks that can occur in a fenestration installation environment.
- Identify hazards and assess risks present in the fenestration installation environment.
- Describe safe working practices to minimise risk in the fenestration installation environment.
- Adopt a safe system of work when undertaking fenestration installation activities.
- Describe how to ensure there is no unauthorised or unsafe access to the fenestration installation working areas.
- Describe the procedures to follow in the event of accidents or emergencies during fenestration installation.
Post Windows, Doors or Conservatories Installation Activity Real unit · GQA Qualifications Limited
This unit focuses on post-installation activities, ensuring all fixtures and fittings are correctly secured and the site is cleared of debris. You'll also carry out finishing tasks and provide customers with relevant information and instructions.
What you'll be able to do
- Ensure that all correct fixtures and fittings are secured as agreed.
- Explain the importance of removing all materials and debris from the site.
- Remove all surplus materials and debris from the site.
- Finish off the work to specified requirements and carry out a final inspection.
- Provide customers with clear instructions and answer any questions concerning the work.
- Identify and overcome problems in relation to the post installation activity.
- Record information related to the installation activity.
Prepare and Position Window and Door Units Ready for Installation Real unit · GQA Qualifications Limited
It teaches you to prepare and position window and door units accurately according to installation plans. You'll select appropriate tools, verify unit specifications, and adjust positioning to ensure correct alignment prior to installation.
What you'll be able to do
- Establish the correct position for window and door units, ensuring they are the correct size, shape, and appearance for the installation.
- Select the correct tools required for the preparation and positioning of window and door units.
- Describe how to prepare different types of window and door units for installation.
- Prepare window and door units correctly, following manufacturer's instructions and safety guidelines.
- Identify which sealing or bonding materials should be used for different types of window and door installations.
- Select the correct sealing or bonding material and apply it correctly to window and door units.
- Position window and door units correctly into apertures according to the installation specification.
Produce specifications for window and door, Curtain Wall or conservatory installations Real unit · GQA Qualifications Limited
It teaches you to produce accurate and clear text-based specifications for window, door, curtain wall, or conservatory installations. You'll learn to verify technical information, write concise documentation, and ensure specifications are fit for purpose.
What you'll be able to do
- Describe how to ensure that text-based technical information is accurate.
- Describe how to ensure that text-based technical information is clear.
- Describe how to ensure that text-based technical information is complete.
- Describe how to ensure that text-based technical information is fit for purpose.
- Produce, record and present text-based information that is accurate.
- Produce, record and present text-based information that is clear.
- Produce, record and present text-based information that is complete.
- Produce, record and present text-based information that is fit for purpose.
- Describe how to ensure that graphical technical information is accurate.
- Describe how to ensure that graphical technical information is clear.
- Describe how to ensure that graphical technical information is complete.
- Describe how to ensure that graphical technical information is fit for purpose.
- Produce, record and present graphical technical information that is accurate.
- Produce, record and present graphical technical information that is clear.
- Produce, record and present graphical technical information that is complete.
- Produce, record and present graphical technical information that is fit for purpose.
- Identify the industry regulations affecting fenestration installation specification.
Promote and Maintain Health and Safety in a Glass or Glass Related Working Environment Real unit · GQA Qualifications Limited
This unit covers the health and safety legislation, regulations, and guidelines relevant to glass or glass-related working environments. You'll learn to monitor and implement changes in health and safety requirements and carry out formal hazard and risk assessments.
What you'll be able to do
- Know which acts, regulations and guidelines apply to the glass or glass related working environment.
- Monitor and implement changes in health and safety acts, regulations and guidelines.
- Carry out a formal assessment of hazards and risks in the glass or glass related working environment and the types of risk or hazards that exist.
- Identify hazards and assess risks in the glass or glass related working environment.
- Adopt a safe method of work.
- Ensure there is no unauthorised or unsafe access to the working areas.
- Monitor colleagues to ensure they comply with health and safety requirements.
- Know what to do in the event of accidents or emergencies.
- Correctly record information on accidents and emergencies.
- Understand the problems that can occur with promoting and maintaining Health and Safety within the glass or glass related working environment and the potential solutions.
Remove Bay Windows Real unit · GQA Qualifications Limited
This unit covers the preparation and removal of bay windows to minimise damage and disruption. You'll prepare internal and external dwelling areas appropriately and understand the necessity of these preparations for safe and effective removal.
What you'll be able to do
- Prepare the internal and external parts of the dwelling for the removal of Bay Windows to minimise damage and disruption and why these preparations are necessary
- Prepare the internal and external parts of the dwelling in a way that will minimise damage and disruption for the removal of Bay Windows
- Know what checks to carry out for structural problems before commencing removal of materials and what actions should be taken if they are present
- Know what types of dangers can be revealed with the components of Bay Window removal and what actions to take with any discovered
- Know the types and use of structural supports during the removal of an existing Bay Window
- Remove fixtures and fittings that prevent or restrict installation and label and store them correctly
- Determine the sequence of removal of windows in a 2 storey bay
- Correctly remove components, materials and outer frames from the aperture in the correct sequence, using appropriate tools, equipment and structural supports correctly and safely and in accordance with Manufacturer recommendations
- Ensure that others involved in the process carry out the required actions
- Know what site conditions and other factors can determine whether the bay window is assembled prior to positioning or whether the window will be assembled in situ
- Understand when and why to ensure any defects in the structure should be addressed before the installation commences
- Overcome problems in preparing apertures for installation
- Ensure the new or restructured aperture meets specification and why this is important
- Ensure that the new or restructured apertures meet specification
Remove Existing Windows and Doors and Prepare Apertures Real unit · GQA Qualifications Limited
You'll learn to safely remove existing windows and doors and prepare apertures for new installations. The unit covers handling dangerous materials, use of structural supports, labelling removed fixtures, and correct removal techniques to minimise hazards.
What you'll be able to do
- Identify what types of dangerous components or materials might be discovered and what actions should be taken if they are discovered.
- Explain the use of structural supports during removal of existing windows or doors.
- Explain why it is important to label removed fixtures and fittings.
- Remove fixtures and fittings that prevent or restrict installation and label and store them correctly.
- Correctly remove components, materials and outer frames from the aperture.
- Ensure the damp proof course is effective.
- Identify the different types of materials that can be used for internal and external finishes.
- Explain why it is important to assemble materials correctly during the aperture preparation process.
- Handle, cut and assemble materials correctly.
- Check that the new or restructured apertures meet specification.
- Explain how to overcome problems in preparing apertures for installation.
Remove and Install Oriel Windows Real unit · GQA Qualifications Limited
This unit covers the safe removal and installation of oriel windows in compliance with Building Regulations. You'll understand regulatory requirements, identify potential hazards such as dangerous materials, and apply appropriate safety measures during installation.
What you'll be able to do
- Know which parts of the Building Regulations relate to the removal and installation of Oriel Windows and how they apply in practice.
- Know what types of dangerous components or materials might be discovered during the removal and installation process and what actions should be taken if they are discovered.
- Know why it is important to label removed fixtures and fittings for identification and reinstallation purposes.
- Remove fixtures and fittings that prevent or restrict installation, and label and store them correctly to prevent damage or loss.
- Correctly remove components, materials and outer frames from the aperture, ensuring minimal damage to the surrounding structure.
- Ensure the damp proof course is effective in preventing moisture ingress after the installation.
- Know the correct methods for the assembly of window components, ensuring structural integrity and proper functionality.
- Know different methods of securing installation materials to different types of structure, selecting appropriate techniques for each situation.
- Ensure that the new or restructured apertures meet the specified dimensions and tolerances.
- Handle and position installation materials correctly, minimising the risk of damage or injury.
- Securely fix the installation materials to the structure using the correct tools, equipment and fixings safely and in accordance with the job specification.
- Know the correct weatherproofing materials for different types of installations, selecting appropriate materials for optimal performance.
- Apply the specified materials safely to provide a weatherproof installation, preventing water ingress and air leakage.
- Know why it is important to have drainage holes clear and functioning to prevent water accumulation.
- Ensure drainage holes are clear and functioning to allow for proper water drainage.
- Overcome problems encountered during the installation process, implementing effective solutions to ensure successful completion.
- Know the different types of materials that can be used for internal and external finishes, selecting appropriate materials for aesthetic and functional purposes.
- Finish off the work to specification, ensuring a high-quality and aesthetically pleasing result.
- Know the type of information and instructions to provide to customers regarding the operation and maintenance of the installed windows.
- Complete documentation related to the installation in accordance with company requirements, ensuring accurate record-keeping and compliance.
Remove and Install Rooflight Windows Real unit · GQA Qualifications Limited
You'll develop knowledge and skills for the safe removal and installation of rooflight windows, adhering to relevant Building Regulations. The unit includes recognising hazards, understanding regulatory applications, and implementing safety procedures throughout the process.
What you'll be able to do
- Know which parts of the Building Regulations relate to the removal and installation of Rooflight Windows and how they apply in practice.
- Know what types of dangerous components or materials might be discovered during the removal and installation of rooflight windows.
- Know what actions should be taken if dangerous components or materials are discovered during the removal and installation of rooflight windows.
- Know why it is important to label removed fixtures and fittings.
- Remove fixtures and fittings that prevent or restrict installation.
- Label removed fixtures and fittings correctly.
- Store removed fixtures and fittings correctly.
- Correctly remove components, materials and outer frames from the aperture.
- Ensure the damp proof course is effective.
- Know the correct methods for the assembly of window components.
- Know different methods of securing installation materials to different types of structure.
- Ensure that the new or restructured apertures meet specification.
- Handle and position installation materials correctly.
- Securely fix the installation materials to the structure using the correct tools, equipment and fixings safely.
- Securely fix the installation materials to the structure using the correct tools, equipment and fixings in accordance with the job specification.
- Know the correct weatherproofing materials for different types of installations.
- Apply the specified materials safely to provide a weatherproof installation.
- Know why it is important to have drainage holes clear and functioning.
- Ensure drainage holes are clear and functioning.
- Overcome problems in the installation.
- Know the different types of materials that can be used for internal and external finishes.
- Finish off the work to specification.
- Know the type of information and instructions to provide to customers.
- Complete documentation related to the installation in accordance with company requirements.
Remove and Install windows and/or doors with non-routine features and installation requirements Real unit · GQA Qualifications Limited
It teaches you to remove and install windows and doors with non-routine features. You'll understand relevant Building Regulations, identify unique installation challenges, manage hazardous materials, and apply appropriate solutions for complex installations.
What you'll be able to do
- Know which parts of the Building Regulations relate to the installation and how they apply in practice.
- Understand the features that make the installation non-routine and how to deal with these.
- Know what types of dangerous components or materials might be discovered and what actions should be taken if they are present.
- Check and confirm installation requirements are correct and comply with Building Regulations and other legislation.
- Prepare the site, tools, equipment and materials for the required work.
- Remove components, materials and outer frames from the aperture.
- Ensure the damp proof methods are effective and comply with legislation and Industry Codes of Practice.
- Ensure that the new or restructured apertures meet the specification.
- Select and use the appropriate tools and equipment for fixing the installation in accordance with safe working practices.
- Know the correct weatherproofing materials for installation work.
- Apply the specified materials safely to provide a weatherproof installation.
- Install glass and/or panels.
- Ensure correct operation of the Installation features.
- Know the different types of materials that can be used for internal and external finishes.
- Finish off the work to specification.
- Finish off the work to specification.
- Complete relevant documentation related to the installation.
Remove and install box sash windows Real unit · GQA Qualifications Limited
This unit equips learners with the knowledge and skills to safely remove and install box sash windows. You'll understand applicable Building Regulations, identify hazardous materials, and apply correct labelling and storage procedures for removed components.
What you'll be able to do
- Know which parts of the Building Regulations relate to the removal and installation of Box sash windows and how they apply in practice
- Know what types of dangerous components or materials might be discovered and what actions should be taken if they are discovered
- Know why it is important to label removed fixtures and fittings
- Remove fixtures and fittings that prevent or restrict installation and label and store them correctly
- Correctly remove components, materials and outer frames from the aperture
- Ensure the damp proof course is effective
- Know different methods of securing installation materials to different types of structure
- Ensure that the new or restructured apertures meet specification
- Handle and position installation materials safely
- Securely fix the installation materials to the structure using the correct tools, equipment and fixings safely and in accordance with the job specification
- Know the correct weatherproofing materials for different types of installations
- Apply the specified materials safely to provide a weatherproof installation
- Know why it is important to have drainage holes clear and functioning
- Ensure drainage holes are clear and functioning
- Overcome problems in the installation
- Know the different types of materials that can be used for internal and external finishes
- Finish off the work to specification
- Know the type of information and instructions to provide to customers
- Complete documentation related to the installation in accordance with company requirements
Understanding the Building Regulations in the Fenestration Industry Real unit · GQA Qualifications Limited
You'll gain an understanding of Building Regulations relevant to the fenestration industry. The unit covers the purpose and application of regulations, key parts affecting window and door installations, inspection processes, and consequences of non-compliance.
What you'll be able to do
- Understand why Building Regulations exist and where they apply.
- Know the main parts of Building Regulations that affect the Fenestration Industry.
- Know who can carry out inspection of work covered by the Building Regulations and who is responsible for ensuring the inspection takes place.
- Know the implications of a failed inspection.
- Understand the aims of part L (Conservation of Fuel and Power) of the Building Regulations regarding U value requirements for Fenestration installation.
- Know the name and range of the UK's national system used for rating the energy efficiency of windows and the minimum energy rating band acceptable in the Building Regulations.
- Know the optimum space for heat retention between two panes of glass in a double glazed unit.
- Know the types of glazing units other than “traditional” double glazed units that can help meet the requirements of Part L of the Building Regulations and the benefits of the different types.
- Know the advantages of using types of glazing that minimise heat loss.
- Understand what is meant by safety glazing.
- Understand when safety glazing must be used.
- Know the exceptions to the use of safety glazing and the minimum thickness acceptable for the exceptions.
- Know the requirements for visible glass markings.
- Know the common problems that can occur when taking delivery of glass and how to minimise the impact of these problems.
- Know the types of windows and doors that part A (Structure) of the Building Regulations applies to.
- Understand when Lintels should be used.
- Understand the process to be followed with Bay Window replacement.
- Understand when and why to ensure any defects in the structure should be addressed before the installation commences.
- Know what bearing plates are and when they should be used.
- Understand the problems that can occur in bay window removal and replacement and how to overcome them.
- Understand the requirements of Part B (Fire Safety).
- Understand the requirements for purge ventilation.
- Understand the requirements for background ventilation.
03The standards
The national standards these units are built against
What the job actually needs, in the words employers and awarding bodies already use for the work itself.
- Standard
Assess the quality of automotive glazing related materials
- Standard
Assess the quality of materials
- Standard
Carry out post fenestration installation activity
- Standard
Completing the construction of a leisure vehicle by installing windows, doors and body graphics
- Standard
Comply with building regulations in the fenestration industry
- Standard
Deal with customer returns of glass and related products
- Standard
Identify and agree fenestration installation requirements
- Standard
Install Bay Windows
- Standard
Maintain windows and doors, or conservatories, or curtain walling
- Standard
Plan the use of resources to meet work requirements in glass manufacturing
- Standard
Prepare and position windows and door sets ready for installation
- Standard
Prepare apertures for fenestration installation
- Standard
Produce specifications for fenestration installations
- Standard
Remove bay windows and prepare apertures
- Standard
Remove bay windows and prepare apertures
- Standard
Remove existing windows, doors and panels and prepare apertures
- Standard
Resolve technical problems at glazing sites
04The credits
The credits, and who awards them
Level 3 credits are regulated, and they are awarded by GQA Qualifications Limited rather than by Zavmo. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you have covered and what is next.
What you would be collecting
Assess the Quality of Materials / Components in a Glass or Glass Related Working EnvironmentCommunicating and Working with Others in the Glass and Related Working EnvironmentsControl the installation of windows and doors, or conservatories or curtain wallingDealing with Environmental matters in the glass and glass related working environmentEnsure Resources are Available to Meet Work Requirements in a Glass or Glass Related Working EnvironmentIdentify Fenestration installation requirementsIdentify and Rectify Technical Problems in a Glass or Glass Related Working EnvironmentInstall Bay Windows
Each one is a real unit registered against this qualification.
How you’d practise it
You don’t watch this. You do it.
You are not assessed on remembering this. You are assessed on applying it, analysing it, evaluating it and producing something. So that is what the practice is: projects, role play and your own live cases, with a tutor in the room.
The Practical Builder · your make-it-real tutor Illustration The Practical Builder Paste in the draft you have for “Produce specifications for window and door, Curtain Wall or conservatory installations”. Not a tidied one, the one you would actually send.
You It is mostly there. The recommendations section is thin.
The Practical Builder Thin is fine, vague is not. Take recommendation two and tell me who does what by when, then we will see if it survives.
- Draft the real one Create
You do “Produce specifications for window and door, Curtain Wall or conservatory installations” on a real document of your own. Zavmo works on the draft you have to send anyway, so the coursework and the job are the same piece of work.
- Map a live decision Analyse
“Assess the Quality of Materials / Components in a Glass or Glass Related Working Environment” runs on a decision you are facing now. Zavmo maps it with you and shows what the second-order effect looks like before you find out the slow way.
What you leave holding
The standards this credential builds, in the shape the product keeps them
Nothing here is marked learned. There is no learner on a public page, so the map shows what the qualification covers rather than what anybody has done.
GQA Level 3 Diploma In the Combined Surveying and Installation of Windows and Doors or Conservatories
- Assess the quality of automotive glazing related materials
- Assess the quality of materials
- Carry out post fenestration installation activity
- Completing the construction of a leisure vehicle by installing windows, doors and body graphics
- Comply with building regulations in the fenestration industry
- Deal with customer returns of glass and related products
- Identify and agree fenestration installation requirements
- Install Bay Windows
How you would learn this
One to one, on the work you already do
A tutor sets the task against your own job and marks the reasoning, at your pace. There is no cohort to fall behind.
A lesson from Assess the Quality of Materials / Components in a Glass or Glass Related Working Environment, one of this qualification's own units.
Applied to your own work
This unit covers the assessment of quantity, quality, and type of glass and related materials. Learners will check materials against specifications, recognise quality variations, and understand appropriate corrective actions to maintain standards.
How the thinking builds
- 1 Remember
- 2 Understand
- 3 Apply
- 4 Analyse
- 5 Evaluate
- 6 Create
It is £70 a month, billed monthly. Your free first module is Future Fluency, and you can cancel any time. Teaching towards this qualification begins when you subscribe.
Built for GQA Level 3 Diploma In the Combined Surveying and Installation of Windows and Doors or Conservatories
24 units in this credential, in the order it lists them, awarded by GQA Qualifications Limited.
- Assess the Quality of Materials / Components in a Glass or Glass Related Working Environment
- Communicating and Working with Others in the Glass and Related Working Environments
- Control the installation of windows and doors, or conservatories or curtain walling
- Dealing with Environmental matters in the glass and glass related working environment
- Ensure Resources are Available to Meet Work Requirements in a Glass or Glass Related Working Environment
- Identify Fenestration installation requirements
and 18 more in the full unit list below.
Free tools
Want a read on where you stand?
Three free tools, no account needed. Each one ends with a role, a level and a way in.
Learned on your own work, taught one-to-one.
Everything you just read, learned one-to-one on the job you already do. Your free first module is Future Fluency, so you can see how the teaching works before you pay for anything.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.
The title, level, credits, guided learning hours and unit learning outcomes on this page are taken from the Ofqual Register of Regulated Qualifications. Contains public sector information licensed under the Open Government Licence v3.0. Where this data comes from.