Pearson Education Ltd · RQF Level 2
Pearson BTEC Level 1/Level 2 First Diploma in Engineering
You don’t just earn this. You learn to use it, one-to-one, on your own real work.
- LevelRQF Level 2
- Guided learning480 hours
- Units in this qualification35
Awarded by Pearson Education Ltd · on the Ofqual register
Start here
See how this course maps onto your role
Ten quick questions, one per Future Fluency, asked against this qualification rather than a generic one.
Check my fluency, free
About 5 minutes · No card · Nothing to commit to
What you’ll learn
What each unit actually teaches you to do
BTEC Firsts allow level 2 learners to develop their knowledge and understanding by applying their learning and skills in a work-related context.
These are the units Pearson Education Ltd registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated, and every one you earn is yours to keep.
Application of Quality Control and Measurement in EngineeringReal unit · Pearson Education Ltd
You'll understand quality control principles within engineering, use measurement tools and techniques, and apply procedures to ensure product compliance. The unit also covers analysing measurement data to identify improvements and the importance of quality assurance.
What you'll be able to do
- Understand the principles of quality control in an engineering environment
- Demonstrate the ability to use various measurement tools and techniques
- Apply quality control procedures to ensure compliance with specifications
- Analyse measurement data to identify areas for improvement
- Recognise the importance of accurate measurement and quality control in engineering
Bicycle Servicing and MaintenanceReal unit · Pearson Education Ltd
You'll gain knowledge of bicycle components and systems, perform routine servicing, diagnose common faults, and carry out repairs. The unit emphasises ensuring bicycle safety and roadworthiness through practical maintenance skills.
What you'll be able to do
- Understand the components and systems of a bicycle
- Perform routine servicing tasks on bicycles
- Diagnose common bicycle faults and malfunctions
- Carry out repairs and replacements of bicycle parts
- Ensure bicycle safety and roadworthiness
Casting TechniquesReal unit · Pearson Education Ltd
This unit covers the principles and applications of various casting techniques, including sand, die, and investment casting. You'll demonstrate safe use of casting equipment, apply appropriate methods, and evaluate the quality of cast components.
What you'll be able to do
- Understand the principles of different casting techniques used in engineering
- Demonstrate the safe use of equipment and materials for casting processes
- Apply appropriate casting techniques to produce engineering components
- Evaluate the quality of cast components against specified requirements
- Recognise the importance of following procedures and safety guidelines in casting
Computer Numerical Control ProgrammingReal unit · Pearson Education Ltd
This unit introduces Computer Numerical Control (CNC) programming principles, including code interpretation and development for machining operations. You'll simulate and test CNC programmes and operate CNC machines safely and effectively.
What you'll be able to do
- Understand the principles of Computer Numerical Control (CNC) programming
- Interpret and analyse CNC program code
- Develop CNC programs for basic machining operations
- Simulate and test CNC programs to ensure accuracy
- Operate CNC machines safely and effectively
Computer-aided EngineeringReal unit · Pearson Education Ltd
You'll explore computer-aided engineering (CAE) principles and use CAE software to create, modify, and analyse engineering designs. The unit includes interpreting simulation results and applying CAE techniques to solve engineering problems.
What you'll be able to do
- Understand the principles of computer-aided engineering (CAE)
- Use CAE software to create and modify engineering designs
- Analyse engineering designs using CAE tools
- Interpret and evaluate the results of CAE simulations
- Apply CAE techniques to solve engineering problems
Continuous Improvement and Problem-SolvingReal unit · Pearson Education Ltd
It teaches you to understand continuous improvement principles within engineering, identify process improvement opportunities, apply problem-solving techniques, and implement continuous improvement strategies while evaluating their effectiveness.
What you'll be able to do
- Understand the principles of continuous improvement within an engineering context
- Identify opportunities for improvement in engineering processes
- Apply problem-solving techniques to address engineering challenges
- Implement continuous improvement strategies in an engineering environment
- Evaluate the effectiveness of implemented improvements
Electrical and Mechanical Science for EngineeringReal unit · Pearson Education Ltd
This unit provides foundational knowledge of electrical and mechanical science principles relevant to engineering. You'll explain key electrical concepts, apply Ohm's Law, and analyse the interaction between electrical and mechanical systems.
What you'll be able to do
- Explain fundamental electrical concepts, such as voltage, current, and resistance
- Apply Ohm's Law to calculate electrical quantities in simple circuits
- Describe basic mechanical principles, such as force, motion, and energy
- Analyse the relationship between electrical and mechanical systems in engineering applications
- Use appropriate units and measurements in electrical and mechanical science
Electronic Circuit Design and ConstructionReal unit · Pearson Education Ltd
This unit develops learners' understanding of electronic circuit design principles and the ability to design, construct, test, and troubleshoot electronic circuits. You'll evaluate circuit performance using appropriate components and techniques.
What you'll be able to do
- Understand the principles of electronic circuit design
- Design electronic circuits to meet specific requirements
- Construct electronic circuits using appropriate components and techniques
- Test and troubleshoot electronic circuits to ensure functionality
- Evaluate the performance of electronic circuits against design specifications
Electronic Devices and Communication ApplicationsReal unit · Pearson Education Ltd
You'll study various electronic devices and their roles in communication systems. The unit covers principles of electronic communication, application of devices in communication, performance analysis, and troubleshooting common issues.
What you'll be able to do
- Identify different types of electronic devices used in engineering applications
- Understand the principles of electronic communication systems
- Apply electronic devices in communication applications
- Analyse the performance of electronic communication systems
- Troubleshoot common issues in electronic devices and communication applications
Engineering AssemblyReal unit · Pearson Education Ltd
This unit covers engineering assembly processes, including following instructions, applying safe working practices, and using tools correctly. You'll inspect and verify the quality of assembled components to ensure compliance with specifications.
What you'll be able to do
- Understand the principles of engineering assembly processes
- Demonstrate the ability to follow engineering assembly instructions and procedures
- Apply safe working practices during engineering assembly activities
- Inspect and verify the quality of assembled engineering components
Engineering DesignReal unit · Pearson Education Ltd
This unit introduces engineering design processes, enabling learners to develop design concepts, create drawings and specifications, and evaluate designs based on technical, cost, safety, and environmental factors.
What you'll be able to do
- Understand the principles of engineering design processes
- Develop engineering design concepts and solutions to meet specific requirements
- Create engineering drawings and specifications using appropriate techniques
- Evaluate and refine engineering designs based on technical and practical considerations
Engineering MaintenanceReal unit · Pearson Education Ltd
This unit covers engineering maintenance principles, types of maintenance procedures, and routine tasks. You'll diagnose faults, carry out repairs on engineering equipment, and accurately record and report maintenance activities.
What you'll be able to do
- Understand the principles of engineering maintenance
- Identify different types of maintenance procedures
- Perform routine maintenance tasks on engineering equipment
- Diagnose faults and carry out repairs on engineering equipment
- Record and report maintenance activities
Engineering Marking OutReal unit · Pearson Education Ltd
You'll understand engineering marking out principles and apply appropriate techniques using measuring instruments. The unit covers material preparation and accuracy checks to ensure precise marking out of components.
What you'll be able to do
- Understand the principles of engineering marking out
- Prepare materials for engineering marking out
- Apply appropriate marking out techniques to engineering materials
- Use measuring instruments accurately during engineering marking out
- Check the accuracy of marked out components
Engineering MaterialsReal unit · Pearson Education Ltd
You'll gain knowledge of engineering materials' properties and characteristics, enabling appropriate material selection for applications. The unit includes investigation of material behaviour under conditions and analysis of processing effects.
What you'll be able to do
- Understand the properties and characteristics of different engineering materials
- Select appropriate materials for specific engineering applications
- Investigate the behaviour of materials under different conditions
- Analyse the effects of processing on material properties
- Understand the importance of material selection in engineering design
Fabrication TechniquesReal unit · Pearson Education Ltd
This unit covers various fabrication techniques used in engineering, including safe tool use and equipment handling. You'll apply fabrication methods to produce components and evaluate quality against specified requirements.
What you'll be able to do
- Understand the principles of various fabrication techniques used in engineering
- Demonstrate the safe use of tools and equipment for fabrication processes
- Apply appropriate fabrication techniques to produce engineering components
- Evaluate the quality of fabricated components against specified requirements
- Recognise the importance of following procedures and safety guidelines in fabrication
Health and Safety in EngineeringReal unit · Pearson Education Ltd
You'll study health and safety regulations relevant to engineering environments, identify workplace hazards, and apply safe working practices. The unit includes effective use of personal protective equipment and appropriate responses to emergencies.
What you'll be able to do
- Understand health and safety regulations in an engineering environment
- Identify potential hazards and risks in engineering workplaces
- Apply safe working practices and procedures
- Use personal protective equipment (PPE) effectively
- Respond to emergencies and accidents in an engineering setting
Interpreting and Using Engineering InformationReal unit · Pearson Education Ltd
You'll identify and interpret various types of engineering information, including drawings, specifications, and technical manuals. The unit teaches you to extract relevant data to support practical engineering tasks and apply engineering information effectively.
What you'll be able to do
- Identify different types of engineering information, including drawings, specifications, and technical manuals
- Interpret engineering drawings and symbols to understand design requirements
- Extract relevant information from engineering documents to support practical tasks
- Apply engineering information to solve practical problems in a workshop or laboratory environment
- Use appropriate tools and techniques to access and retrieve engineering information effectively
Introduction to Communications for EngineeringReal unit · Pearson Education Ltd
This unit introduces communication principles within engineering, focusing on effective verbal and written skills. You'll apply suitable communication methods for different audiences and recognise barriers to effective communication.
What you'll be able to do
- Understand the fundamental principles of communication in an engineering context
- Demonstrate effective verbal communication skills in engineering scenarios
- Demonstrate effective written communication skills in engineering scenarios
- Apply appropriate communication methods for different engineering audiences
- Recognise the importance of accurate and concise communication in engineering
Investigating an Engineered ProductReal unit · Pearson Education Ltd
You'll investigate an engineered product by analysing its purpose, design, materials, and construction methods. The unit also involves evaluating the product's performance and sustainability to understand engineering considerations.
What you'll be able to do
- Investigate the purpose and function of an engineered product
- Examine the design and construction of an engineered product
- Analyse the materials used in an engineered product
- Evaluate the performance and sustainability of an engineered product
Machining TechniquesReal unit · Pearson Education Ltd
This unit introduces different machining techniques such as turning, milling, drilling, and grinding, emphasising safe tool use and equipment maintenance. You'll apply machining methods to produce components and assess their quality against required standards.
What you'll be able to do
- Understand different machining techniques used in engineering
- Demonstrate the safe use of machining tools and equipment
- Apply appropriate machining techniques to produce components
- Inspect and evaluate the quality of machined components
- Maintain machining tools and equipment
Mathematics for EngineeringReal unit · Pearson Education Ltd
You'll study fundamental mathematical concepts relevant to engineering and apply mathematical techniques to solve problems. The unit includes using mathematical tools and software to analyse data and present information in engineering contexts.
What you'll be able to do
- Understand fundamental mathematical concepts relevant to engineering applications
- Apply mathematical techniques to solve engineering problems
- Use mathematical tools and software to analyse engineering data
- Interpret and present mathematical information in an engineering context
Operating an Efficient WorkplaceReal unit · Pearson Education Ltd
This unit covers the principles of an efficient workplace, including resource organisation and management. You'll implement safety procedures, analyse productivity factors, and evaluate workplace practices to enhance operational efficiency.
What you'll be able to do
- Understand the principles of an efficient workplace
- Apply methods for organising and managing resources effectively
- Implement procedures for maintaining a safe and healthy working environment
- Analyse factors that contribute to workplace productivity
- Evaluate the effectiveness of workplace practices and procedures
Operation and Maintenance of Electrical Systems and ComponentsReal unit · Pearson Education Ltd
You'll study the operation of electrical systems and components, focusing on safe working practices and routine maintenance procedures. The unit includes identifying common faults and applying diagnostic techniques to ensure system functionality.
What you'll be able to do
- Understand the principles of operation of electrical systems and components
- Demonstrate safe working practices when working with electrical systems
- Apply procedures for the routine maintenance of electrical systems and components
- Identify common faults and malfunctions in electrical systems
- Apply diagnostic techniques to identify the causes of electrical faults
- Understand the importance of following electrical safety regulations and standards
Operation and Maintenance of Electronic Systems and ComponentsReal unit · Pearson Education Ltd
You'll understand the operation and maintenance of electronic systems and components, including digital and analogue electronics. The unit covers component selection, fault diagnosis, basic maintenance, and safe working practices in electronic systems.
What you'll be able to do
- Understand the principles of operation of electronic systems and components
- Identify and select appropriate electronic components for specific applications
- Perform basic maintenance procedures on electronic systems
- Diagnose common faults in electronic systems and components
- Apply safe working practices when working with electronic systems
- Understand the importance of testing and measurement in electronic system maintenance
Operation and Maintenance of Fluid Power Systems and ComponentsReal unit · Pearson Education Ltd
You'll study fluid power systems, including hydraulic and pneumatic principles and components. The unit covers maintenance procedures, fault diagnosis, component selection, and safe working practices within fluid power applications.
What you'll be able to do
- Understand the principles of operation of fluid power systems and components
- Identify and select appropriate fluid power components for specific applications
- Perform basic maintenance procedures on fluid power systems
- Diagnose common faults in fluid power systems and components
- Apply safe working practices when working with fluid power systems
- Understand the importance of fluid cleanliness and condition monitoring
Operation and Maintenance of Mechanical Systems and ComponentsReal unit · Pearson Education Ltd
This unit covers the principles of operation of mechanical systems and components, routine maintenance practices, fault identification, and diagnostic techniques. You'll learn to maintain mechanical systems such as engines, pumps, and gearboxes, ensuring their reliable operation.
What you'll be able to do
- Understand the principles of operation of mechanical systems and components
- Demonstrate the ability to perform routine maintenance on mechanical systems and components
- Identify common faults and malfunctions in mechanical systems and components
- Apply appropriate diagnostic techniques to identify the causes of mechanical failures
- Recognise the importance of preventative maintenance in ensuring the reliable operation of mechanical systems
PC Software and Hardware in EngineeringReal unit · Pearson Education Ltd
This unit provides knowledge of PC software and hardware relevant to engineering applications. You'll utilise software for design and analysis, maintain and troubleshoot PC systems, and evaluate their performance in engineering contexts.
What you'll be able to do
- Identify the different types of PC software used in engineering
- Understand the functions of PC hardware components relevant to engineering applications
- Utilise PC software for engineering tasks such as design and analysis
- Maintain and troubleshoot PC hardware and software used in engineering
- Evaluate the performance of PC systems in engineering applications
Preparing and Controlling Engineering Manufacturing OperationsReal unit · Pearson Education Ltd
You'll understand the preparation and control of engineering manufacturing operations, including planning, resource identification, risk assessment, and quality control measures. The unit develops skills to manage and evaluate manufacturing processes effectively.
What you'll be able to do
- Understand the processes involved in preparing for engineering manufacturing operations
- Plan engineering manufacturing operations effectively
- Control engineering manufacturing operations to meet specified requirements
- Apply quality control measures during engineering manufacturing operations
- Evaluate the efficiency and effectiveness of engineering manufacturing operations
Production Planning for EngineeringReal unit · Pearson Education Ltd
This unit introduces the principles and key stages of production planning in engineering. You'll apply scheduling and sequencing techniques, understand resource allocation and optimisation, and analyse production processes to improve efficiency.
What you'll be able to do
- Understand the principles of production planning in an engineering context
- Identify the key stages involved in the production planning process
- Apply techniques for scheduling and sequencing production activities
- Understand the importance of resource allocation and optimisation
- Analyse production data to identify areas for improvement
- Understand the role of quality control in production planning
Sustainable Vehicle Power and Structure DesignReal unit · Pearson Education Ltd
You'll study sustainable vehicle power systems and structural design principles. The unit covers analysis of sustainable power sources, environmental impact evaluation, and assessment of structural performance and efficiency.
What you'll be able to do
- Understand the principles of sustainable vehicle power systems
- Analyse different types of sustainable vehicle power sources
- Evaluate the environmental impact of vehicle design and power systems
- Apply principles of structural design to vehicle components
- Assess the performance and efficiency of sustainable vehicle technologies
The Engineered WorldReal unit · Pearson Education Ltd
You'll explore the scope and societal impact of engineering, identifying various sectors and examining historical developments. The unit also covers current trends and future challenges within the engineered world.
What you'll be able to do
- Understand the scope and impact of engineering on society
- Identify different sectors within the engineered world
- Explore the historical development of engineering
- Investigate current trends and future challenges in engineering
Vehicle Electrical SystemsReal unit · Pearson Education Ltd
You'll identify main components and functions of vehicle electrical systems, including batteries, alternators, and starter motors. The unit covers fault recognition and safe working practices during maintenance and repair activities.
What you'll be able to do
- Identify the main components of a vehicle electrical system
- Describe the function of different electrical circuits in a vehicle
- Explain the principles of operation of vehicle electrical components, such as batteries, alternators, and starter motors
- Recognise common faults in vehicle electrical systems
- Apply safe working practices when inspecting and maintaining vehicle electrical systems
Vehicle Engines and Other SystemsReal unit · Pearson Education Ltd
This unit provides knowledge of vehicle engine components and systems, including cooling, lubrication, and fuel systems. You'll understand engine operation principles, recognise common faults, and apply safe practices during inspection and maintenance.
What you'll be able to do
- Identify the main components of a vehicle engine
- Describe the function of different vehicle systems, such as cooling, lubrication, and fuel systems
- Explain the principles of operation of internal combustion engines
- Recognise common faults in vehicle engines and other systems
- Apply safe working practices when inspecting and maintaining vehicle engines and systems
Vehicle Maintenance TechniquesReal unit · Pearson Education Ltd
This unit provides learners with fundamental knowledge and practical skills for vehicle maintenance. You'll perform basic maintenance tasks, diagnose faults, use appropriate tools, and apply safe working practices within a vehicle maintenance context.
What you'll be able to do
- Understand the fundamental principles of vehicle maintenance
- Identify and use appropriate tools and equipment for vehicle maintenance tasks
- Perform basic maintenance procedures on vehicle systems
- Diagnose common vehicle faults
- Apply safe working practices in a vehicle maintenance environment
- Record and report on vehicle maintenance activities
WeldingReal unit · Pearson Education Ltd
This unit covers fundamental welding principles and techniques, safe working practices, and equipment maintenance. You'll apply various welding methods, inspect welded joints for quality, and ensure the integrity of welds.
What you'll be able to do
- Understand the fundamental principles of welding techniques
- Demonstrate safe working practices within a welding environment
- Apply different welding techniques to join materials
- Inspect and evaluate welded joints for quality and integrity
- Maintain welding equipment and tools in good working order
The honest bit
You’ve started things before
Most courses were built for a room full of people who aren’t you. A cohort moves on whether or not your week allowed it, and by the third week the thing you’re behind on becomes the reason you stop opening it.
There’s no cohort here, and no timetable to fall behind. Before anything starts, Zavmo asks when you’re sharpest and how long you can realistically sit down for, then builds the sessions around those answers. A bad fortnight changes your pace. It doesn’t put you behind.
And you only pay once you start learning. Searching and planning are free, and you can cancel any time — so the cost of finding out is an afternoon, not a year.
Your passport
Every credit is a stamp you keep
Level 2 credits are regulated. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you’ve earned and what’s next.
Application of Quality Control and Measurement in EngineeringBicycle Servicing and MaintenanceCasting TechniquesComputer Numerical Control ProgrammingComputer-aided EngineeringContinuous Improvement and Problem-SolvingElectrical and Mechanical Science for EngineeringElectronic Circuit Design and Construction
Each stamp is a real unit registered against this qualification.
Who’d teach you this
The Evidence Evaluator
Assessor
Helps you show what you can actually do, gathering the evidence that proves it as you learn.
Meet all twelve tutorsWhere this connects
Where these credits take you
A qualification is never a dead end here. See the jobs its credits open, the national occupational standards its units map to, and the future skills they quietly build.
Where this can lead
Associate Quality Engineer
Your journey in quality engineering starts here. We're looking for someone eager to learn, committed to excellence, and ready to build a rewarding career. We'll give you the tools and the support; you bring the curiosity and the drive. Let's build something great, together.
See the whole journey →Opens the roleAssociate Quality EngineerOne of the jobs this qualification is a route intoSee the role →Opens the roleAssociate Simulation EngineerOne of the jobs this qualification is a route intoSee the role →Future FluencyAll ten future skillsSee how every unit is contextualised by the tenExplore →
Skills it covers
What the job actually needs. These are the standards the units are built against, in the words employers and awarding bodies already use for the work itself.
Provide fluids for the operation
How you’ll actually learn this
One-to-one, on your own real work
A qualification is usually something done to you: sit the class, sit the exam, hope it sticks. Here it’s the opposite. You learn it one-to-one with a companion, on your own real work, and you keep going until you can use it, not just recall it.
One-to-one, on your real workNo lectures, no past-papers. Every unit is practised on the actual tasks your job throws at you, a tutor beside you, not a video in front of you.
Taught to the top, not the testMost courses stop at remembering. Your companion keeps climbing: analysing, judging, creating. That’s the part a machine can’t do for you.
Credits you keep, a map that continuesEvery unit is regulated and yours for good. The day you finish, Zavmo already knows the next role your new credits open.
Applied to your work in any of these jobs
Which job do you mean?
Learners will understand quality control principles within engineering, use measurement tools and techniques, and apply procedures to ensure product compliance. The unit also covers analysing measurement data to identify improvements and the importance of quality assurance.
How the thinking builds
- Remember
- Understand
- Apply
- Analyse
- Evaluate
- Create
Built for Pearson BTEC Level 1/Level 2 First Diploma in Engineering
35 units in this credential, in the order it lists them, awarded by Pearson Education Ltd.
- Application of Quality Control and Measurement in Engineering
- Bicycle Servicing and Maintenance
- Casting Techniques
- Computer Numerical Control Programming
- Computer-aided Engineering
- Continuous Improvement and Problem-Solving
and 29 more in the full unit list below.
One to one, not one to many
No two people run this the same way
A course is written once and handed to everyone. This is assembled around you, and keeps changing as it learns you. Five things it reads, and what each one changes.
- Your actual work Every unit is taught against a live piece of your own work, not a worked example from a textbook.
- What you already know The first conversation finds your starting point, so you skip what you can already do and spend the time on what you cannot.
- The conditions you learn under Not a learning-styles quiz. The evidence does not support those. The dimensions the research does back, read once and used to shape the plan.
- How far you got last time It picks up mid-thought. The tutor knows what you said, what you struggled with, and what it asked you to try.
- Which tutor suits the moment Twelve of them, each for a different kind of thinking. The one who walks you through a first idea is not the one who stress-tests it.
See how you learn, free. Eight questions, no sign-up. A directional taster; the diagnostic inside Zavmo goes deeper and keeps adapting.
Why it sticks
Most courses stop at remembering
There’s a well-known ladder of how deeply you learn something, called Bloom’s Taxonomy. Most courses get you up the first two rungs: you remember some facts, you pass a test, you forget it. Real skill lives at the top. Judging, deciding, creating. And this isn’t a generic ladder: every rung has a named Zavmo tutor who walks you up it.
- 6CreateThe Creative Catalyst
- 5EvaluateThe Evidence Evaluator
- 4AnalyseThe Analyst
- 3ApplyThe Coach
- 2UnderstandThe Connector
- 1RememberThe Builder
Where most courses leave you Where Zavmo takes you
Why this matters: AI can already remember and understand for you. What it can’t do is
take your real problem and judge the right call. So the only learning worth paying
for is the learning that takes you to the top. That’s exactly what a tutor doing it with
you, on your real work, is for.
The value
Why the companion is worth £70 a month
You’re not paying for the units. They’re regulated, and the same wherever you earn them. You’re paying for the one thing that decides whether you actually get there: a companion that makes them stick, on your real work.
That is one-to-one on this qualification, every day, on the work you already do, for £70 a month. Your first module is free, so you can see the teaching before you pay for any of it. Billed monthly, cancel any time and billing stops.
Earned on your own work, taught to the top.
Everything you just read, learned one-to-one on the job you already do. Your first module is free, so you can see the teaching before you pay for any of it.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.