How you’d get it
How you’d get this certificate
- Zavmo teaches you. You learn the units one-to-one with an AI tutor, on your own work.
- You register with an approved centre. That is a college, training provider or employer Excellence, Achievement & Learning Limited has approved to offer this qualification. Zavmo is not an approved centre, so you register with them, not with us.
- The centre assesses, and Excellence, Achievement & Learning Limited awards. A qualified assessor at the centre judges your evidence, and the certificate comes from Excellence, Achievement & Learning Limited.
01What it is
The EAL Level 3 NVQ Extended Diploma in Installation and Commissioning is designed to allow a learner to specialise in various pathways related to installation and commissioning within the engineering sector, requiring the achievement of mandatory and optional units.
These are the units Excellence, Achievement & Learning Limited registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated. Zavmo teaches towards them on your own work, and work done here is recognised as prior learning under the agreements we hold.
Zavmo is not an awarding body, is not an approved centre, and is not affiliated with Excellence, Achievement & Learning Limited. It does the teaching and the mapping. Excellence, Achievement & Learning Limited sets this qualification and awards it, and a qualified human assessor makes the assessment decision.
Free first step
Try a free Future Fluency lesson first
The free part is a Future Fluency lesson on using AI at work. It is not part of this qualification. Next, a free account. We build your plan for this qualification as you set up. Teaching towards this qualification begins when you subscribe.
No card · Nothing to commit to
02The units
What each unit actually teaches you to do
Assembling Structural Sub Assemblies to Produce a Public Service Vehicle Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the skills to interpret engineering drawings and assemble structural sub-assemblies for public service vehicles. You'll ensure assemblies meet quality standards and tolerances.
What you'll be able to do
- Assemble structural sub-assemblies to produce a public service vehicle, following engineering drawings and specifications
- Assemble structural sub-assemblies to produce a public service vehicle, including understanding the different types of sub-assemblies and the principles of vehicle construction
Assembling and testing electronic circuits Real unit · Excellence, Achievement & Learning Limited
You'll learn to assemble and test electronic circuits according to circuit diagrams and testing procedures. The unit includes identifying components, troubleshooting faults, and applying appropriate testing methodologies.
What you'll be able to do
- Assemble and test electronic circuits according to circuit diagrams and testing procedures
- Assemble and test electronic circuits, including understanding circuit components, assembly techniques, and testing methodologies
Assembling and testing fluid power systems Real unit · Excellence, Achievement & Learning Limited
You'll learn to assemble and test fluid power systems according to engineering drawings and specifications. The unit includes component assembly, inspection, and testing to verify system performance.
What you'll be able to do
- Assemble fluid power systems according to engineering drawings and specifications.
- Test fluid power systems to ensure they meet performance criteria.
- Understand the principles of assembling fluid power systems.
- Understand the methods used for testing fluid power systems.
Assembling pattern, model and engineering woodwork components Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to prepare and assemble pattern, model, and engineering woodwork components accurately. The unit includes understanding wood properties and applying suitable fixing methods for secure assembly.
What you'll be able to do
- Assemble pattern, model and engineering woodwork components, ensuring accurate alignment and secure fixing
- Assemble pattern, model and engineering woodwork components, including understanding the properties of different wood types and the principles of woodworking techniques
Assembling, wiring and testing electrical panels/components mounted in enclosures Real unit · Excellence, Achievement & Learning Limited
You'll develop practical skills to assemble, wire, and test electrical panels and components mounted in enclosures. The unit includes interpreting technical drawings, correct component placement, wiring, and adherence to safety and fastening procedures.
What you'll be able to do
- Assemble electrical panels and components within enclosures according to technical drawings and specifications
- Wire electrical panels and components ensuring correct connections and adherence to safety regulations
- Test assembled and wired electrical panels/components to verify functionality and compliance with performance standards
- Assemble, wire and test electrical panels/components mounted in enclosures
Carrying Out Fault Diagnosis on Escalator Installations Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to carry out fault diagnosis on escalator installations using a systematic approach and appropriate tools. The unit includes interpreting fault codes, reporting findings, and understanding escalator operation and safety.
What you'll be able to do
- Carry out fault diagnosis on escalator installations.
- Carry out fault diagnosis on escalator installations.
Carrying Out Fault Diagnosis on Lift Installations Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to carry out fault diagnosis on lift installations using a systematic approach and appropriate tools. The unit includes interpreting diagnostic information, recording findings, and understanding lift operation principles.
What you'll be able to do
- Carry out fault diagnosis on lift installations.
- Carry out fault diagnosis on lift installations.
Carrying out aircraft detail fitting activities Real unit · Excellence, Achievement & Learning Limited
It teaches you to carry out aircraft detail fitting activities in compliance with aviation standards and safety protocols. You'll gain knowledge of aircraft structures, fitting techniques, and the correct use of tools and equipment.
What you'll be able to do
- Carry out aircraft detail fitting activities in compliance with aviation standards and safety protocols
- Carry out aircraft detail fitting activities, including understanding aircraft structures, fitting techniques, and relevant regulations
Carrying out hand forging of engineering materials Real unit · Excellence, Achievement & Learning Limited
This unit covers the hand forging of engineering materials, focusing on the correct use of forging tools and equipment. You'll learn to forge materials to specified dimensions and tolerances while adhering to industry standards and safety regulations.
What you'll be able to do
- Carry out hand forging of engineering materials, adhering to industry standards and safety regulations
- Carry out hand forging of engineering materials, including understanding the properties of different materials and the principles of forging techniques
Carrying out heat treatment of engineering materials Real unit · Excellence, Achievement & Learning Limited
This unit equips learners to carry out heat treatment of engineering materials by selecting appropriate methods, preparing materials, and operating equipment according to specified procedures. You'll monitor and control temperature and time to achieve desired material properties.
What you'll be able to do
- Carry out heat treatment of engineering materials according to specified procedures
- Monitor and control the heat treatment process to achieve desired material properties
- Demonstrate knowledge of how to carry out heat treatment of engineering materials
- Explain the principles of heat treatment and its effects on engineering materials
Carrying out maintenance activities on motorsport vehicle electrical equipment Real unit · Excellence, Achievement & Learning Limited
This unit covers maintenance activities on motorsport vehicle electrical equipment. You'll follow manufacturer's instructions to inspect, repair, or replace components while adhering to safety protocols.
What you'll be able to do
- Carry out maintenance activities on motorsport vehicle electrical equipment according to manufacturer's instructions
- Carry out maintenance activities on motorsport vehicle electrical equipment safely and effectively
- Diagnose faults in motorsport vehicle electrical equipment
Checking and Setting Lift Installations Real unit · Excellence, Achievement & Learning Limited
This unit covers checking and setting lift installations according to procedures and safety regulations. You'll prepare installations, perform checks and adjustments to specifications, document processes and results, and understand relevant safety and operational requirements.
What you'll be able to do
- Check and set lift installations in accordance with specified procedures and safety regulations.
- Know the procedures and safety regulations for checking and setting lift installations.
Commissioning Air Conditioning and Ventilation Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
You'll commission air conditioning and ventilation equipment and systems by following specified procedures and safety regulations. The unit covers preparation, execution of commissioning tasks, and documentation, alongside understanding system components and functions.
What you'll be able to do
- Commission air conditioning and ventilation equipment and systems in accordance with specified procedures and safety regulations.
- Know the procedures and safety regulations for commissioning air conditioning and ventilation equipment and systems.
Commissioning Compressed Air Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
You'll gain knowledge and skills to commission compressed air equipment and systems safely and effectively. The unit covers correct commissioning procedures, adherence to safety regulations, and accurate recording of commissioning data.
What you'll be able to do
- Commission compressed air equipment and systems.
- Commission compressed air equipment and systems.
Commissioning Electrical/Electronic Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
You'll develop the skills to commission electrical and electronic equipment and systems following established procedures. This includes testing equipment operation, documenting the commissioning process, and understanding safety regulations and commissioning stages.
What you'll be able to do
- Commission electrical/electronic equipment and systems in accordance with established procedures.
- Commission electrical/electronic equipment and systems, including relevant safety regulations and industry best practices.
Commissioning Emergency Electrical Power Generation Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
You'll commission emergency electrical power generation equipment and systems by interpreting manufacturer specifications and following correct testing and adjustment procedures. The unit emphasises documentation and understanding the purpose of each commissioning step.
What you'll be able to do
- Commission emergency electrical power generation equipment and systems according to manufacturer specifications.
- Demonstrate the correct procedures for commissioning emergency electrical power generation equipment and systems.
- Understand the methods used to commission emergency electrical power generation equipment and systems.
Commissioning Engineered Systems Real unit · Excellence, Achievement & Learning Limited
It teaches you to commission engineered systems by interpreting procedures and safety regulations, preparing systems, executing commissioning tasks, and documenting results. You'll understand commissioning processes and compliance requirements.
What you'll be able to do
- Commission engineered systems in accordance with specified procedures and safety regulations.
- Know the procedures and safety regulations for commissioning engineered systems.
Commissioning Environmental Pollution Control Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
It teaches you to commission environmental pollution control equipment and systems by preparing equipment, performing commissioning activities according to established procedures, and documenting results. You'll understand the principles underlying environmental pollution control technologies.
What you'll be able to do
- Commission Environmental Pollution Control Equipment and Systems
- Commission Environmental Pollution Control Equipment and Systems
Commissioning Escalator Installations Real unit · Excellence, Achievement & Learning Limited
This unit covers the commissioning of escalator installations, including preparation, performing commissioning activities according to manufacturer's specifications, and verifying safety features. You'll gain knowledge of escalator operation principles and the commissioning process to ensure safe and effective installation.
What you'll be able to do
- Commission Escalator Installations
- Commission Escalator Installations
Commissioning Fluid Power Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
This unit covers commissioning fluid power equipment and systems by preparing equipment, following specified procedures, and documenting the commissioning process. You'll understand the purpose and diagnostic methods involved.
What you'll be able to do
- Commission fluid power equipment and systems
- Commission fluid power equipment and systems
Commissioning Fresh Water Distribution Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
You'll gain knowledge and skills to commission fresh water distribution equipment and systems following organisational procedures. The unit covers checking operation against specifications and accurately recording commissioning activities.
What you'll be able to do
- Commission fresh water distribution equipment and systems.
- Commission fresh water distribution equipment and systems.
Commissioning Heating and Ventilation Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
This unit covers the commissioning of heating and ventilation equipment and systems in line with industry standards. You'll learn to prepare equipment for commissioning, carry out the commissioning process, document results, and understand the purpose and procedures involved.
What you'll be able to do
- Commission heating and ventilation equipment and systems in accordance with industry standards.
- Demonstrate knowledge of the commissioning processes for heating and ventilation equipment and systems.
Commissioning Instrumentation and Control Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
This unit equips learners to commission instrumentation and control equipment and systems following organisational procedures. You'll calibrate equipment, test functionality, make adjustments, and document commissioning activities.
What you'll be able to do
- Commission Instrumentation and Control Equipment and Systems
- Commission Instrumentation and Control Equipment and Systems
Commissioning Mechanical Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
This unit covers the commissioning of mechanical equipment and systems in line with industry standards and manufacturer instructions. You'll develop practical skills in testing and compliance to ensure correct equipment operation.
What you'll be able to do
- Commission mechanical equipment and systems according to industry standards.
- Demonstrate the ability to commission mechanical equipment and systems effectively.
- Understand the procedures for commissioning mechanical equipment and systems.
- Commission mechanical equipment and systems safely and efficiently.
Commissioning Process Controller Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
You'll learn to commission process controller equipment and systems safely and effectively. The unit includes following manufacturer specifications, calibrating equipment for accuracy, and documenting the commissioning process.
What you'll be able to do
- Commission process controller equipment and systems in accordance with established procedures.
- Demonstrate the ability to commission process controller equipment and systems effectively.
- Understand the procedures for commissioning process controller equipment and systems.
- Commission process controller equipment and systems safely and efficiently.
Commissioning Refrigeration Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
This unit equips learners with the knowledge and skills to commission refrigeration equipment and systems safely and effectively. You'll apply correct commissioning procedures, adhere to safety regulations, and accurately record commissioning data.
What you'll be able to do
- Commission refrigeration equipment and systems in accordance with specified procedures and safety regulations.
- Know the procedures and safety regulations for commissioning refrigeration equipment and systems.
Commissioning Waste/Foul Water Distribution Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the knowledge and skills to commission waste and foul water distribution equipment and systems safely. You'll follow correct procedures, apply safety regulations, and accurately record commissioning data.
What you'll be able to do
- Commission waste/foul water distribution equipment and systems in accordance with specified procedures and safety regulations.
- Know the procedures and safety regulations for commissioning waste/foul water distribution equipment and systems.
Commissioning Workplace Environmental Control Equipment and Systems Real unit · Excellence, Achievement & Learning Limited
It teaches you to commission workplace environmental control equipment and systems by following organisational procedures, checking operation against design parametres, adjusting settings for performance and energy efficiency, and accurately recording commissioning data. You'll understand system principles.
What you'll be able to do
- Commission Workplace Environmental Control Equipment and Systems
- Commission Workplace Environmental Control Equipment and Systems
Complying with statutory regulations and organisational safety requirements Real unit · Excellence, Achievement & Learning Limited
You'll understand relevant statutory regulations and organisational safety requirements applicable to the workplace. This unit enables them to demonstrate compliance through practical adherence to safety procedures.
What you'll be able to do
- Comply with statutory regulations and organisational safety requirements.
- Describe how to comply with statutory regulations and organisational safety requirements.
Complying with statutory regulations and organisational safety requirements Real unit · Excellence, Achievement & Learning Limited
This unit requires learners to understand and comply with health, safety, and legal regulations within an organisation.
What you'll be able to do
- Understand the statutory regulations and organisational safety requirements.
Conducting business improvement activities Real unit · Excellence, Achievement & Learning Limited
It teaches you to plan and conduct business improvement activities professionally and effectively. You'll understand improvement methodologies, stakeholder engagement, and execution of improvement plans.
What you'll be able to do
- Conduct business improvement activities in a professional and effective manner.
- Demonstrate the ability to plan, execute, and review business improvement activities.
- Understand the methodologies and tools used in conducting business improvement activities.
- Know the importance of stakeholder engagement in business improvement activities.
- Identify areas for business improvement and implement appropriate solutions.
Cutting and shaping materials using thermal cutting equipment Real unit · Excellence, Achievement & Learning Limited
It teaches you to cut and shape materials using thermal cutting equipment safely and to specified tolerances. You'll understand the principles of thermal cutting, material characteristics, and relevant safety regulations.
What you'll be able to do
- Cut and shape materials using thermal cutting equipment, adhering to safety regulations and specified tolerances
- Cut and shape materials using thermal cutting equipment, including understanding the principles of thermal cutting and the characteristics of different materials
Diagnosing and rectifying faults on motorsport vehicle systems during competition Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to diagnose and rectify faults on motorsport vehicle systems during competition, ensuring timely repairs. The unit covers fault-finding techniques, repair procedures, and documentation of fault diagnosis and repair processes specific to motorsport environments.
What you'll be able to do
- Diagnose and rectify faults on motorsport vehicle systems during competition, ensuring timely and effective repairs
- Demonstrate knowledge of how to diagnose and rectify faults on motorsport vehicle systems during competition, including fault-finding techniques and repair procedures
Fettling, finishing and checking cast components Real unit · Excellence, Achievement & Learning Limited
This unit covers fettling, finishing, and checking cast components to meet specifications. You'll remove excess material, achieve required surface finishes, check dimensional accuracy, identify defects, and understand relevant techniques and tools.
What you'll be able to do
- Fettle, finish and check cast components to meet required specifications
- Understand the processes involved in fettling, finishing and checking cast components
Finishing surfaces by applying coatings or coverings Real unit · Excellence, Achievement & Learning Limited
This unit focuses on finishing surfaces by applying coatings or coverings, including selecting appropriate materials, preparing surfaces, and applying coatings using suitable techniques. You'll develop an understanding of surface preparation and coating materials to meet specified requirements.
What you'll be able to do
- Finish surfaces by applying coatings or coverings to meet specified requirements
- Prepare surfaces for coating or covering application
- Demonstrate knowledge of different coating and covering materials
- Demonstrate knowledge of the application techniques for coatings and coverings
Finishing surfaces by applying treatments Real unit · Excellence, Achievement & Learning Limited
You'll learn to finish surfaces by applying treatments, including surface preparation, treatment application, and inspection to ensure quality and compliance. The unit covers the importance of preparation and different treatment types to achieve desired finishes.
What you'll be able to do
- Finish surfaces by applying treatments, ensuring quality and meeting specified requirements
- Demonstrate knowledge of how to finish surfaces by applying treatments, including surface preparation, treatment selection, and application methods
Fitting Sub Assemblies and Components to Public Service Vehicles Real unit · Excellence, Achievement & Learning Limited
It teaches you to fit sub-assemblies and components to Public Service Vehicles by interpreting manufacturer's instructions, preparing vehicles, and using appropriate tools and techniques for fitting. You'll develop practical skills for effective assembly installation.
What you'll be able to do
- Fit sub-assemblies to Public Service Vehicles according to manufacturer's instructions
- Fit components to Public Service Vehicles according to manufacturer's instructions
- Demonstrate knowledge of how to fit sub-assemblies to Public Service Vehicles
- Demonstrate knowledge of how to fit components to Public Service Vehicles
Forming and assembling electrical cable enclosure and support systems Real unit · Excellence, Achievement & Learning Limited
You'll learn to form and assemble electrical cable enclosure and support systems by interpreting engineering drawings and specifications. The unit covers selecting materials and tools, forming components, and assembling systems in compliance with industry standards and safety regulations.
What you'll be able to do
- Form and assemble electrical cable enclosure and support systems in accordance with industry standards and safety regulations.
- Demonstrate knowledge of the procedures for forming and assembling electrical cable enclosure and support systems.
Forming and assembling pipework systems Real unit · Excellence, Achievement & Learning Limited
This unit develops learners' skills in forming and assembling pipework systems according to standards and specifications. You'll select materials and tools, form components to required shapes, assemble using suitable joining techniques, and test systems for leaks and integrity.
What you'll be able to do
- Form and assemble pipework systems in accordance with relevant standards and specifications
- Understand the principles and techniques of forming and assembling pipework systems
General electrical and electronic engineering applications Real unit · Excellence, Achievement & Learning Limited
It teaches you to perform electrical wiring, electronic component assembly, and circuit testing following established procedures. You'll develop practical skills ensuring functionality and safety in electrical and electronic applications.
What you'll be able to do
- Carry out general electrical engineering applications in accordance with established procedures and safety regulations
- Carry out general electronic engineering applications in accordance with established procedures and safety regulations
- Demonstrate knowledge of how to carry out general electrical engineering applications
- Demonstrate knowledge of how to carry out general electronic engineering applications
General fabrication and welding applications Real unit · Excellence, Achievement & Learning Limited
You'll carry out general fabrication and welding applications in line with industry standards and safety regulations. The unit includes preparing materials, performing fabrication and welding tasks, and inspecting welds for quality and integrity while understanding different welding processes.
What you'll be able to do
- Carry out general fabrication and welding applications in accordance with industry standards and safety regulations
- Demonstrate knowledge of the processes involved in carrying out general fabrication and welding applications
General machining, fitting and assembly applications Real unit · Excellence, Achievement & Learning Limited
You'll perform general machining, fitting, and assembly tasks to specified tolerances and quality standards. The unit emphasises correct alignment, securing of components, and application of machining techniques.
What you'll be able to do
- Carry out general machining operations, adhering to specified tolerances and quality standards
- Perform fitting and assembly tasks, ensuring components are correctly aligned and secured
- Apply knowledge of general machining, fitting and assembly techniques to complete engineering applications effectively
General maintenance engineering applications Real unit · Excellence, Achievement & Learning Limited
You'll carry out general maintenance engineering applications in line with established procedures and safety regulations. The unit includes performing maintenance tasks, adhering to safety requirements, and documenting maintenance activities, alongside understanding maintenance procedures.
What you'll be able to do
- Carry out general maintenance engineering applications in accordance with established procedures and safety regulations
- Demonstrate knowledge of how to carry out general maintenance engineering applications, including the tools, equipment, and techniques involved
Handing Over and Confirming Completion of Installation or Commissioning Activities Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to prepare handover documentation and communicate completion of installation or commissioning activities. The unit covers obtaining confirmation from clients or supervisors and understanding the handover process.
What you'll be able to do
- Hand over and confirm completion of installation or commissioning activities
- Hand over and confirm completion of installation or commissioning activities
Handing over and confirming completion of maintenance or installation activities Real unit · Excellence, Achievement & Learning Limited
You'll learn how to properly hand over completed work and confirm its quality and completion.
What you'll be able to do
- Successfully hand over work and confirm completion.
Inspecting a motorsport vehicle during a competition Real unit · Excellence, Achievement & Learning Limited
You'll inspect motorsport vehicles during competitions by conducting pre-competition checks, identifying mechanical and safety issues, and accurately documenting findings. The unit emphasises adherence to competition guidelines and understanding key vehicle components.
What you'll be able to do
- Inspect a motorsport vehicle during a competition, adhering to safety regulations and competition guidelines
- Understand the procedures and requirements for inspecting a motorsport vehicle during a competition
Installing Air Conditioning and Ventilation Equipment Real unit · Excellence, Achievement & Learning Limited
You'll gain the skills and knowledge to install air conditioning and ventilation equipment. This includes preparing the installation site, following specified procedures for installation, testing equipment operation, and understanding the principles of air conditioning and ventilation systems.
What you'll be able to do
- Install air conditioning and ventilation equipment according to specified procedures.
- Demonstrate knowledge of the processes involved in installing air conditioning and ventilation equipment.
Installing Compressed Air Equipment Real unit · Excellence, Achievement & Learning Limited
You'll be able to install compressed air equipment following engineering drawings and safety standards. The unit includes ensuring correct alignment and connections, testing for leaks and operation, and following step-by-step installation procedures.
What you'll be able to do
- Install compressed air equipment according to engineering drawings and safety standards.
- Demonstrate the correct procedures for installing compressed air equipment.
- Understand the procedures for installing compressed air equipment.
- Know the relevant engineering drawings and health and safety requirements for installing compressed air equipment.
Installing Electrical/Electronic Equipment Real unit · Excellence, Achievement & Learning Limited
This unit covers the installation of electrical and electronic equipment, focusing on adherence to industry standards and safety regulations. You'll learn to perform installations correctly using appropriate tools and understand the importance of compliance with relevant guidelines.
What you'll be able to do
- Install electrical/electronic equipment in accordance with industry standards and safety regulations.
- Demonstrate the correct procedures for installing electrical/electronic equipment.
- Understand the methods used to install electrical/electronic equipment.
Installing Emergency Electrical Power Generation Equipment Real unit · Excellence, Achievement & Learning Limited
You'll gain the skills to install emergency electrical power generation equipment safely and in compliance with relevant electrical standards. The unit covers installation procedures, verification of correct operation, and documentation of the installation process.
What you'll be able to do
- Install emergency electrical power generation equipment in compliance with electrical standards and safety protocols.
- Demonstrate the correct procedures for installing emergency electrical power generation equipment.
- Understand the procedures for installing emergency electrical power generation equipment.
- Know the relevant electrical standards and health and safety requirements for installing emergency electrical power generation equipment.
Installing Environmental Pollution Control Equipment Real unit · Excellence, Achievement & Learning Limited
This unit covers the installation of environmental pollution control equipment, including site preparation, installation according to design specifications, and inspection for functionality and regulatory compliance. You'll follow correct procedures and understand relevant environmental regulations.
What you'll be able to do
- Install environmental pollution control equipment according to design specifications and environmental regulations.
- Demonstrate the correct procedures for installing environmental pollution control equipment.
- Understand the procedures for installing environmental pollution control equipment.
- Know the relevant environmental regulations and health and safety requirements for installing environmental pollution control equipment.
Installing Equipment to Produce an Engineered System Real unit · Excellence, Achievement & Learning Limited
You'll develop the skills to install equipment to produce engineered systems in line with specified designs and safety guidelines. This includes installation, inspection for safety compliance, documentation of the process, and understanding component functions within the system.
What you'll be able to do
- Install equipment to produce an engineered system, adhering to specified designs and safety guidelines.
- Install equipment to produce an engineered system, including understanding the function of each component and the overall system operation.
Installing Escalator Equipment Real unit · Excellence, Achievement & Learning Limited
You'll install escalator equipment in compliance with regulations and safety guidelines. The unit includes assembling, aligning, securing, and testing escalator components while understanding the purpose of applicable regulations.
What you'll be able to do
- Install escalator equipment in compliance with relevant regulations and safety guidelines.
- Demonstrate the correct procedures for installing escalator equipment.
- Understand the methods used to install escalator equipment.
Installing Fluid Power Equipment Real unit · Excellence, Achievement & Learning Limited
This unit equips learners with the skills to install fluid power equipment safely and effectively. You'll interpret engineering drawings, prepare work areas, install components according to specifications, and follow correct installation sequences while adhering to health and safety requirements.
What you'll be able to do
- Install fluid power equipment according to engineering drawings and specifications.
- Demonstrate the correct procedures for installing fluid power equipment.
- Understand the methods used to install fluid power equipment.
Installing Fresh Water Distribution Equipment Real unit · Excellence, Achievement & Learning Limited
You'll gain knowledge and skills to prepare installation areas, install fresh water distribution equipment, and conduct testing for leaks and functionality. The unit includes understanding different types of distribution systems.
What you'll be able to do
- Install fresh water distribution equipment
- Install fresh water distribution equipment
Installing Heating and Ventilation Equipment Real unit · Excellence, Achievement & Learning Limited
This unit equips learners to install heating and ventilation equipment according to manufacturer's specifications and relevant building regulations. You'll inspect installed equipment for compliance, document the installation process, and understand different types of heating and ventilation systems.
What you'll be able to do
- Install heating and ventilation equipment in compliance with relevant regulations.
- Demonstrate knowledge of the correct methods for installing heating and ventilation equipment.
Installing Hydraulic Lift Equipment Real unit · Excellence, Achievement & Learning Limited
You'll gain the knowledge and skills to prepare work areas and install hydraulic lift equipment following manufacturer's instructions. The unit includes inspecting installations to ensure correct operation and understanding different types of hydraulic lift equipment.
What you'll be able to do
- Install hydraulic lift equipment
- Install hydraulic lift equipment
Installing Instrumentation and Control Equipment Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the knowledge and skills to install instrumentation and control equipment safely and according to specifications. It includes preparation of the work area, installation procedures, inspection for correct functionality, and understanding connection processes.
What you'll be able to do
- Install instrumentation and control equipment according to specifications and safety guidelines.
- Demonstrate the correct procedures for installing instrumentation and control equipment.
- Understand the procedures for installing instrumentation and control equipment.
- Know the relevant health and safety requirements for installing instrumentation and control equipment.
Installing Lift Doors, Frames and Ancillary Components Real unit · Excellence, Achievement & Learning Limited
You'll learn to install lift doors, frames, and ancillary components by preparing the lift shaft, following manufacturer's instructions, and inspecting installations for correct alignment and functionality. The unit also covers relevant installation procedures and safety considerations.
What you'll be able to do
- Install lift doors, frames and ancillary components in accordance with manufacturer's instructions and safety regulations.
- Demonstrate the correct procedures for installing lift doors, frames and ancillary components.
- Understand the procedures for installing lift doors, frames and ancillary components.
- Know the relevant health and safety requirements for installing lift doors, frames and ancillary components.
Installing Lift Ropes and Chains Real unit · Excellence, Achievement & Learning Limited
You'll install lift ropes and chains following safety protocols and industry best practices. The unit covers preparation of lift systems, correct installation procedures, use of appropriate tools, and application of health and safety measures throughout the process.
What you'll be able to do
- Install lift ropes and chains, adhering to safety protocols and industry best practices.
- Demonstrate the correct procedures for installing lift ropes and chains.
- Understand the methods used to install lift ropes and chains.
Installing Lift Well and Ancillary Equipment Real unit · Excellence, Achievement & Learning Limited
You'll be able to install lift well and ancillary equipment following manufacturer's instructions and relevant standards. The unit covers ensuring secure, correctly aligned installations and understanding the purpose and function of the equipment.
What you'll be able to do
- Install lift well and ancillary equipment.
- Install lift well and ancillary equipment.
Installing Mechanical Equipment Real unit · Excellence, Achievement & Learning Limited
You'll be able to install mechanical equipment following manufacturer's instructions and relevant regulations, ensuring correct alignment, securing with appropriate fixings, and verifying functionality. The unit also covers preparation of the work area and understanding different types of mechanical equipment.
What you'll be able to do
- Install Mechanical Equipment
- Install Mechanical Equipment
Installing Process Controller Equipment Real unit · Excellence, Achievement & Learning Limited
This unit covers the installation of process controller equipment according to manufacturer's guidelines. You'll install, test, and document the equipment installation, and understand different types of process controllers and their functions.
What you'll be able to do
- Install process controller equipment following manufacturer's guidelines.
- Demonstrate knowledge of the installation requirements for process controller equipment.
Installing Refrigeration Equipment Real unit · Excellence, Achievement & Learning Limited
This unit equips learners with the knowledge and skills to install refrigeration equipment safely and in compliance with regulations. You'll follow manufacturer instructions and use appropriate tools during installation.
What you'll be able to do
- Install refrigeration equipment in compliance with regulations.
- Demonstrate the ability to install refrigeration equipment effectively.
- Understand the procedures for installing refrigeration equipment.
- Install refrigeration equipment safely and efficiently.
Installing Traction Lift Equipment Real unit · Excellence, Achievement & Learning Limited
It teaches you to prepare installation areas and install traction lift equipment safely according to manufacturer specifications and safety regulations. You'll understand component functions and safety procedures.
What you'll be able to do
- Install traction lift equipment
- Install traction lift equipment
Installing Waste/Foul Water Distribution Equipment Real unit · Excellence, Achievement & Learning Limited
You'll gain skills to install waste and foul water distribution equipment safely and effectively. The unit includes preparing installation areas, following regulations and safety guidelines, and testing equipment for leaks and correct operation.
What you'll be able to do
- Install waste/foul water distribution equipment safely and effectively.
- Demonstrate knowledge of the installation procedures for waste/foul water distribution equipment.
Installing Workplace Environmental Control Equipment Real unit · Excellence, Achievement & Learning Limited
You'll learn to install workplace environmental control equipment according to specifications. The unit covers connection to power and control systems, testing, and troubleshooting to ensure proper operation.
What you'll be able to do
- Install workplace environmental control equipment according to specifications.
- Demonstrate the ability to install workplace environmental control equipment effectively.
- Understand the procedures for installing workplace environmental control equipment.
- Install workplace environmental control equipment safely and efficiently.
Installing aircraft mechanical fasteners Real unit · Excellence, Achievement & Learning Limited
This unit covers the correct and safe installation of aircraft mechanical fasteners according to specified requirements. You'll understand different fastener types, required tools and equipment, and the installation procedures.
What you'll be able to do
- Install aircraft mechanical fasteners, ensuring they are correctly fitted and meet the required specifications
- Demonstrate knowledge of the procedures for installing aircraft mechanical fasteners
- Demonstrate knowledge of the different types of aircraft mechanical fasteners and their applications
Joining Public Service Vehicle Components by Mechanical Processes Real unit · Excellence, Achievement & Learning Limited
This unit covers the selection and application of mechanical joining methods for public service vehicle components. You'll develop skills in preparing components and performing mechanical joins to meet specified tolerances.
What you'll be able to do
- Join Public Service Vehicle components using specified mechanical processes
- Apply safe working practices when joining Public Service Vehicle components by mechanical processes
- Demonstrate knowledge of how to join Public Service Vehicle components using mechanical processes
- Explain the importance of following safety procedures when joining Public Service Vehicle components by mechanical processes
Maintaining and testing process instrumentation and control devices Real unit · Excellence, Achievement & Learning Limited
This unit focuses on maintaining and testing process instrumentation and control devices according to established procedures and safety protocols. You'll test device functionality and demonstrate knowledge of various instrumentation types.
What you'll be able to do
- Maintain process instrumentation and control devices, following established procedures and safety protocols
- Test process instrumentation and control devices to verify functionality and accuracy
- Demonstrate knowledge of the procedures and techniques required to maintain and test process instrumentation and control devices effectively
Maintaining electrical equipment/systems Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the ability to inspect, maintain, and repair electrical equipment and systems. You'll apply procedures for isolating equipment and identifying faults in accordance with safety standards.
What you'll be able to do
- Maintain electrical equipment and systems in accordance with industry standards and safety regulations
- Demonstrate knowledge of the procedures and techniques required to maintain electrical equipment and systems effectively
Maintaining electronic equipment/systems Real unit · Excellence, Achievement & Learning Limited
You'll gain knowledge and skills to maintain electronic equipment and systems, ensuring optimal performance. The unit includes performing diagnostic tests, repairing or replacing faulty components, and understanding the principles of electronic operation.
What you'll be able to do
- Maintain electronic equipment/systems to ensure optimal performance and safety
- Demonstrate knowledge of the principles and procedures involved in maintaining electronic equipment/systems
Maintaining fluid power equipment Real unit · Excellence, Achievement & Learning Limited
You'll maintain fluid power equipment by performing routine maintenance, inspecting for wear and damage, and replacing components as necessary. The unit provides knowledge of fluid power system principles and maintenance procedures.
What you'll be able to do
- Maintain fluid power equipment to ensure optimal performance and prevent failures.
- Demonstrate knowledge of the procedures for maintaining fluid power equipment.
Maintaining mechanical devices and equipment Real unit · Excellence, Achievement & Learning Limited
This unit covers the maintenance of mechanical devices and equipment in accordance with manufacturer's instructions. You'll learn to perform routine tasks such as lubrication, cleaning, and adjustments, as well as identify and report faults or potential problems.
What you'll be able to do
- Maintain mechanical devices and equipment according to manufacturer's instructions and safety guidelines
- Demonstrate knowledge of the principles and procedures involved in maintaining mechanical devices and equipment
Measuring and Setting Out Lift Installations Real unit · Excellence, Achievement & Learning Limited
You'll learn to measure lift shaft dimensions accurately and set out installation points using engineering drawings. The unit includes verification of measurements to ensure precision before installation.
What you'll be able to do
- Measure and set out lift installations accurately.
- Demonstrate the ability to measure and set out lift installations effectively.
- Understand the procedures for measuring and setting out lift installations.
- Measure and set out lift installations safely and efficiently.
Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and Transportation Real unit · Excellence, Achievement & Learning Limited
It teaches you to prepare and manoeuvre Armoured Fighting Vehicles (AFVs) for maintenance and transportation. You'll follow procedures and safety protocols to ensure vehicles are accessible and safely moved as required.
What you'll be able to do
- Prepare Armoured Fighting Vehicles (AFVs) for maintenance activities, ensuring all safety protocols are followed.
- Manoeuvre Armoured Fighting Vehicles (AFVs) for transportation, adhering to relevant regulations and procedures.
- Understand the procedures for preparing Armoured Fighting Vehicles (AFVs) for maintenance and transportation.
- Understand the safety considerations when manoeuvring Armoured Fighting Vehicles (AFVs).
Preparing and proving CNC fabrication machine tool programs Real unit · Excellence, Achievement & Learning Limited
You'll gain the skills to prepare and prove CNC fabrication machine tool programmes accurately. The unit covers identifying potential errors, verifying programme functionality, making adjustments, and understanding the proving process.
What you'll be able to do
- Prepare CNC fabrication machine tool programs, ensuring they are accurate and suitable for the intended task
- Prove CNC fabrication machine tool programs, verifying their functionality and making any necessary adjustments
- Demonstrate knowledge of the procedures for preparing CNC fabrication machine tool programs
- Demonstrate knowledge of the procedures for proving CNC fabrication machine tool programs
Preparing and proving CNC machine tool programs Real unit · Excellence, Achievement & Learning Limited
It teaches you to prepare and prove CNC machine tool programs by interpreting engineering drawings and specifications. You'll develop, simulate, and test programs to ensure accuracy and safe operation.
What you'll be able to do
- Prepare CNC machine tool programs in accordance with specified requirements and industry best practices
- Prove CNC machine tool programs to ensure accuracy, efficiency, and safety
- Understand the processes involved in preparing CNC machine tool programs
- Understand the processes involved in proving CNC machine tool programs
Preparing and using CNC fabrication machinery Real unit · Excellence, Achievement & Learning Limited
You'll gain skills to prepare and operate CNC fabrication machinery safely and effectively to produce components to required specifications. The unit covers machinery preparation, adherence to safety guidelines, and operation techniques to achieve specified standards.
What you'll be able to do
- Prepare CNC fabrication machinery in accordance with manufacturer's instructions and safety guidelines
- Use CNC fabrication machinery to produce components to the required specifications
- Demonstrate knowledge of the procedures for preparing CNC fabrication machinery
- Demonstrate knowledge of the correct and safe use of CNC fabrication machinery
Preparing and using CNC machining centres Real unit · Excellence, Achievement & Learning Limited
It teaches you to prepare and operate CNC machining centres safely and effectively. You'll gain knowledge of CNC programming principles, tooling types, and process monitoring to ensure manufacturing accuracy and efficiency.
What you'll be able to do
- Prepare and use CNC machining centres for manufacturing processes, following safety guidelines and operational procedures
- Demonstrate knowledge of how to prepare and use CNC machining centres, including programming, tooling, and machine operation
Preparing and using CNC milling machines Real unit · Excellence, Achievement & Learning Limited
You'll gain the knowledge and skills to prepare and operate CNC milling machines safely and effectively. The unit covers machine setup, loading and securing workpieces, and producing components to required specifications and tolerances.
What you'll be able to do
- Prepare CNC milling machines in accordance with established procedures and safety guidelines
- Use CNC milling machines effectively to produce components to the required specifications
- Prepare CNC milling machines safely and efficiently
- Use CNC milling machines to achieve desired outcomes
Preparing and using CNC turning machines Real unit · Excellence, Achievement & Learning Limited
It teaches you to prepare and operate CNC turning machines safely and effectively. You'll perform pre-use checks, prepare machines for specific tasks, and produce components to required specifications while recognising potential hazards.
What you'll be able to do
- Prepare and use CNC turning machines effectively and safely.
- Demonstrate knowledge of the procedures for preparing and using CNC turning machines.
Preparing and using grinding machines Real unit · Excellence, Achievement & Learning Limited
You'll prepare and use grinding machines safely and effectively for specified tasks. The unit covers machine setup, achieving required finishes and dimensions, inspecting finished workpieces, and understanding preparation and operational procedures.
What you'll be able to do
- Prepare and use grinding machines safely and effectively for specified tasks
- Demonstrate knowledge of the preparation and operational procedures for using grinding machines
Preparing and using industrial robots Real unit · Excellence, Achievement & Learning Limited
You'll develop the skills to prepare, set up, and operate industrial robots safely. The unit covers pre-operational checks, safety measures, and adherence to operational guidelines for effective robot use.
What you'll be able to do
- Prepare industrial robots for operation, ensuring correct setup and safety measures are in place
- Use industrial robots to perform specified tasks, adhering to operational guidelines and quality standards
- Demonstrate knowledge of the procedures and techniques required to prepare and use industrial robots effectively
Preparing and using lathes for turning operations Real unit · Excellence, Achievement & Learning Limited
It teaches you to prepare and use lathes for turning operations safely and effectively. You'll develop competence in tool selection, machine setup, calibration, and achieving required dimensions and surface finishes.
What you'll be able to do
- Prepare lathes for turning operations, ensuring they are correctly set up and ready for use
- Use lathes to perform turning operations, adhering to safety procedures and achieving the required specifications
- Demonstrate knowledge of the procedures for preparing lathes for turning operations
- Demonstrate knowledge of the procedures for using lathes for turning operations
Preparing and using manual TIG or plasma-arc welding equipment Real unit · Excellence, Achievement & Learning Limited
You'll develop the skills to prepare and use manual TIG or plasma-arc welding equipment effectively. This includes setting up welding parametres, selecting appropriate consumables, and performing welding tasks to achieve desired weld quality and structural integrity.
What you'll be able to do
- Prepare manual TIG or plasma-arc welding equipment for welding operations, ensuring correct setup and settings
- Use manual TIG or plasma-arc welding equipment to perform welding tasks, achieving desired weld quality and structural integrity
- Prepare manual TIG or plasma-arc welding equipment
- Use manual TIG or plasma-arc welding equipment
Preparing and using manual flame brazing and braze welding equipment Real unit · Excellence, Achievement & Learning Limited
You'll gain the skills to prepare and use manual flame brazing and braze welding equipment safely and effectively. This includes equipment preparation, joining metal components to specified quality standards, inspecting joints, and understanding equipment setup and gas control.
What you'll be able to do
- Prepare and use manual flame brazing and braze welding equipment safely and effectively to join metal components
- Demonstrate knowledge of how to prepare and use manual flame brazing and braze welding equipment, including understanding equipment setup, gas control, and brazing techniques
Preparing and using manual metal arc welding equipment Real unit · Excellence, Achievement & Learning Limited
You'll develop the skills to inspect, set up, and operate manual metal arc welding equipment safely. The unit includes adjusting welding parametres and performing welding techniques to produce quality welds.
What you'll be able to do
- Prepare manual metal arc welding equipment in accordance with manufacturer's instructions and safety guidelines.
- Use manual metal arc welding equipment to create welds to a specified standard.
- Understand the procedures for preparing manual metal arc welding equipment.
- Understand the safe working practices when using manual metal arc welding equipment.
Preparing and using manual oxy/fuel gas welding equipment Real unit · Excellence, Achievement & Learning Limited
You'll learn to prepare and use manual oxy/fuel gas welding equipment safely and correctly. The unit includes assembling equipment, identifying hazards, performing welding tasks, and understanding operational procedures.
What you'll be able to do
- Prepare manual oxy/fuel gas welding equipment, ensuring it is correctly assembled and safe to use
- Use manual oxy/fuel gas welding equipment to perform welding tasks, adhering to safety procedures and achieving the required weld quality
- Demonstrate knowledge of the procedures for preparing manual oxy/fuel gas welding equipment
- Demonstrate knowledge of the procedures for using manual oxy/fuel gas welding equipment
Preparing and using milling machines Real unit · Excellence, Achievement & Learning Limited
You'll learn to select appropriate milling cutters, set up milling machines, and operate them safely to produce components. The unit emphasises correct alignment and parametre settings for machining operations.
What you'll be able to do
- Prepare milling machines for specific machining operations
- Use milling machines to produce components to required specifications
- Demonstrate knowledge of how to prepare milling machines for use
- Explain the safe and effective use of milling machines
Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment Real unit · Excellence, Achievement & Learning Limited
You'll learn to prepare and use semi-automatic MIG, MAG, and flux cored arc welding equipment. This includes checking equipment condition, setting up according to manufacturer instructions, selecting consumables, and performing welding tasks to produce quality welds.
What you'll be able to do
- Prepare manual MIG, MAG and other continuous wire welding equipment for use
- Use manual MIG, MAG and other continuous wire welding equipment to perform welding tasks
- Prepare manual MIG, MAG and other continuous wire welding equipment safely and correctly
- Use manual MIG, MAG and other continuous wire welding equipment to produce quality welds
Producing CAD models/drawings using a CAD system Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to produce CAD models and drawings using CAD systems to meet project specifications and industry standards. The unit covers software functionalities, modelling techniques, and verification of CAD outputs for quality compliance.
What you'll be able to do
- Produce CAD models and drawings using a CAD system, adhering to industry standards and project specifications
- Demonstrate knowledge of how to produce CAD models and drawings using a CAD system, including software functionalities and modelling techniques
Producing Composite Mouldings using Resin Film Infusion Techniques Real unit · Excellence, Achievement & Learning Limited
It teaches you to produce composite mouldings using resin film infusion techniques. You'll follow specified procedures, prepare materials and equipment, produce mouldings to required dimensions, and understand the resin film infusion process and materials used.
What you'll be able to do
- Produce composite mouldings using resin film infusion techniques according to specified procedures
- Understand the techniques and processes involved in producing composite mouldings using resin film infusion
Producing Composite Mouldings using Resin Flow Infusion Techniques Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to produce composite mouldings using resin flow infusion techniques. The unit covers preparation of materials and equipment, production processes, and inspection of finished mouldings to meet quality standards.
What you'll be able to do
- Produce composite mouldings using resin flow infusion techniques, ensuring quality and accuracy in the finished product
- Produce composite mouldings using resin flow infusion techniques, including understanding the properties of resins and the principles of infusion processes
Producing aircraft detail assemblies Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the skills to produce aircraft detail assemblies using appropriate tools, techniques, and materials. You'll assemble components according to engineering drawings, ensure compliance with specifications, and inspect assemblies for defects.
What you'll be able to do
- Produce aircraft detail assemblies to specified standards, using appropriate tools, techniques, and materials
- Demonstrate knowledge of how to produce aircraft detail assemblies, including understanding aircraft assembly processes, material properties, and quality control procedures
Producing and preparing molten materials for casting Real unit · Excellence, Achievement & Learning Limited
You'll gain knowledge and skills to produce and prepare molten materials for casting safely and in accordance with procedures. The unit includes understanding material properties, production techniques, and relevant safety guidelines.
What you'll be able to do
- Produce and prepare molten materials for casting in accordance with specified procedures and safety guidelines
- Produce and prepare molten materials for casting, including understanding the properties of different materials and the techniques involved
Producing and preparing sand moulds and cores for casting Real unit · Excellence, Achievement & Learning Limited
This unit covers the production and preparation of sand moulds and cores for casting. You'll understand the materials, processes, and quality control methods necessary to produce moulds and cores to specified dimensions and tolerances.
What you'll be able to do
- Produce sand moulds and cores for casting according to specified requirements.
- Prepare sand moulds and cores for casting ensuring they are ready for the casting process.
- Understand the processes involved in producing and preparing sand moulds and cores for casting.
- Understand the quality control procedures for sand moulds and cores.
Producing cast components by manual means Real unit · Excellence, Achievement & Learning Limited
It teaches you to produce cast components by manual means, achieving required dimensions and quality. You'll understand the steps involved, necessary tools and equipment, and the importance of following procedures.
What you'll be able to do
- Produce cast components by manual means, following established procedures and achieving the required dimensions and quality
- Demonstrate knowledge of the procedures for producing cast components by manual means
- Demonstrate knowledge of the materials and techniques used in manual casting processes
Producing components by rapid prototyping techniques Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with the skills to produce components using rapid prototyping techniques according to design specifications. You'll follow quality control procedures, identify defects, and understand different rapid prototyping methods.
What you'll be able to do
- Produce components by rapid prototyping techniques, following design specifications and quality control procedures
- Produce components by rapid prototyping techniques, including understanding the different rapid prototyping methods and their applications
Producing components using hand fitting techniques Real unit · Excellence, Achievement & Learning Limited
It teaches you to produce components using hand fitting techniques to meet specified tolerances and quality standards. You'll select and use appropriate hand fitting tools and evaluate finished components against quality requirements.
What you'll be able to do
- Produce components using appropriate hand fitting techniques to meet specified tolerances and quality standards
- Select and use hand fitting tools and equipment effectively and safely
- Understand the principles of hand fitting techniques and their application in component manufacturing
- Understand how to produce components using hand fitting techniques
Producing components using hand fitting techniques Real unit · Excellence, Achievement & Learning Limited
This unit focuses on understanding and applying hand fitting techniques in manufacturing.
What you'll be able to do
- Demonstrate proficiency in hand fitting techniques.
Producing composite assemblies Real unit · Excellence, Achievement & Learning Limited
You'll learn to produce composite assemblies by preparing moulds and materials, applying composite materials, curing assemblies, and inspecting finished products for defects and quality conformance.
What you'll be able to do
- Produce composite assemblies to meet specified quality standards and tolerances
- Select appropriate materials and techniques for producing composite assemblies
- Ensure the structural integrity of composite assemblies
Producing composite mouldings using pre-preg techniques Real unit · Excellence, Achievement & Learning Limited
This unit covers producing composite mouldings using pre-preg laminating techniques. You'll understand the preparation of materials and equipment, the laminating process, and health and safety considerations to meet specified quality standards.
What you'll be able to do
- Produce composite mouldings using pre-preg laminating techniques to meet specified quality standards.
- Understand the processes involved in producing composite mouldings using pre-preg laminating techniques.
- Understand the health and safety requirements when producing composite mouldings.
Producing composite mouldings using wet lay-up techniques Real unit · Excellence, Achievement & Learning Limited
You'll produce composite mouldings using wet lay-up techniques, including mould preparation, resin and reinforcement application, laminate consolidation, curing, and demoulding. The unit combines practical skills with theoretical knowledge of the wet lay-up process.
What you'll be able to do
- Produce composite mouldings using wet lay-up techniques to meet required quality standards.
- Demonstrate knowledge of the procedures for producing composite mouldings using wet lay-up techniques.
Producing electrical or electronic engineering drawings using a CAD system Real unit · Excellence, Achievement & Learning Limited
It teaches you to produce electrical or electronic engineering drawings using a CAD system. You'll create drawings to specified requirements, ensure adherence to industry standards and conventions, verify accuracy, and understand CAD principles and techniques.
What you'll be able to do
- Produce electrical or electronic engineering drawings using a CAD system, adhering to relevant standards and conventions
- Demonstrate knowledge of the principles and techniques involved in producing electrical or electronic engineering drawings using a CAD system
Producing engineering project plans Real unit · Excellence, Achievement & Learning Limited
You'll learn to produce comprehensive engineering project plans by defining objectives, scope, and deliverables. The unit includes resource allocation, scheduling, and presenting plans in a professional format.
What you'll be able to do
- Produce engineering project plans that clearly define project objectives, scope, and deliverables
- Develop engineering project plans, including resource allocation, timelines, and risk assessments
- Understand the principles of project planning and management in an engineering context
- Understand how to produce engineering project plans
Producing mechanical assemblies Real unit · Excellence, Achievement & Learning Limited
You'll learn to produce mechanical assemblies in accordance with engineering drawings and specified procedures. The unit includes using appropriate tools and equipment, and inspecting assemblies to ensure they meet quality standards and tolerances.
What you'll be able to do
- Produce mechanical assemblies according to engineering drawings and specifications
- Ensure mechanical assemblies meet quality standards and tolerances
- Demonstrate knowledge of the processes involved in producing mechanical assemblies
- Demonstrate knowledge of the tools and equipment used in producing mechanical assemblies
Producing mechanical engineering drawings using a CAD System Real unit · Excellence, Achievement & Learning Limited
Develop skills in creating mechanical engineering drawings through the use of CAD software.
What you'll be able to do
- Create accurate mechanical drawings using CAD software.
Producing mechanical engineering drawings using a CAD system Real unit · Excellence, Achievement & Learning Limited
It teaches you to produce mechanical engineering drawings using CAD systems to industry standards. You'll interpret engineering specifications, create and modify drawings accurately, and manage file storage in appropriate formats.
What you'll be able to do
- Produce mechanical engineering drawings using a CAD system to industry standards
- Interpret engineering specifications and translate them into CAD drawings
- Demonstrate knowledge of CAD system functions and commands
- Demonstrate knowledge of the conventions used in mechanical engineering drawings
Producing platework components and assemblies Real unit · Excellence, Achievement & Learning Limited
This unit provides learners with skills to produce platework components and assemblies by cutting, shaping, and forming materials according to engineering drawings and specifications. You'll also assemble components using appropriate methods and tools.
What you'll be able to do
- Produce platework components according to engineering drawings and specifications
- Assemble platework components to create complete assemblies
- Demonstrate knowledge of the techniques used to produce platework components
- Demonstrate knowledge of the methods used to assemble platework components
Producing sheet metal components and assemblies Real unit · Excellence, Achievement & Learning Limited
You'll produce sheet metal components and assemblies by preparing materials, fabricating components to specified tolerances, and assembling using appropriate techniques. The unit also covers different methods for producing sheet metal components.
What you'll be able to do
- Produce sheet metal components and assemblies to meet specified requirements
- Understand the methods and processes involved in producing sheet metal components and assemblies
Stripping and rebuilding motorsport engines pre-competition Real unit · Excellence, Achievement & Learning Limited
It teaches you to strip and rebuild motorsport engines pre-competition by following established procedures and safety guidelines. You'll identify required tools and apply techniques to prepare engines for competition use.
What you'll be able to do
- Strip and rebuild motorsport engines in preparation for competition, following established procedures and safety guidelines
- Strip and rebuild motorsport engines in preparation for competition, including understanding the relevant tools, techniques, and specifications
Stripping and rebuilding motorsport vehicles pre-competition Real unit · Excellence, Achievement & Learning Limited
It teaches you to strip and rebuild motorsport vehicles pre-competition following established procedures and safety guidelines. You'll remove and inspect components, reassemble vehicles to specifications, and understand the importance of safety throughout the process.
What you'll be able to do
- Strip and rebuild motorsport vehicles in preparation for competition, following established procedures and safety guidelines
- Demonstrate knowledge of the processes involved in stripping and rebuilding motorsport vehicles pre-competition, including component identification, inspection, and reassembly techniques
Using and interpreting engineering data and documentation Real unit · Excellence, Achievement & Learning Limited
You'll develop the skills required to accurately use and interpret engineering documents and data.
What you'll be able to do
- Interpret engineering documentation and data accurately.
Using and interpreting engineering data and documentation Real unit · Excellence, Achievement & Learning Limited
It teaches you to use and interpret engineering data and documentation by extracting relevant information from drawings and specifications. You'll interpret data in various formats and apply it to solve practical engineering problems.
What you'll be able to do
- Use and interpret engineering data and documentation
- Use and interpret engineering data and documentation
Using computer software packages to assist with engineering activities Real unit · Excellence, Achievement & Learning Limited
It teaches you to use computer software packages to support engineering activities. You'll create designs, perform analyses and simulations, generate documentation, and understand software functionalities and data input methods.
What you'll be able to do
- Use computer software packages effectively to assist with a range of engineering activities, such as design, analysis, and documentation
- Demonstrate knowledge of how to use computer software packages to support engineering activities, including understanding software functionalities, data input methods, and output interpretation
Using wood for pattern, modelmaking and other engineering applications Real unit · Excellence, Achievement & Learning Limited
This unit covers the selection and use of wood materials and techniques for pattern making, modelmaking, and engineering applications. You'll develop woodworking skills to produce accurate and functional components.
What you'll be able to do
- Use wood for pattern making, modelmaking and other engineering applications, selecting appropriate materials and techniques
- Apply woodworking skills to create accurate and functional patterns, models and components
- Demonstrate knowledge of the procedures and techniques required to use wood for pattern, modelmaking and other engineering applications effectively
Wiring and testing electrical equipment and circuits Real unit · Excellence, Achievement & Learning Limited
You'll develop competence in wiring and testing electrical equipment and circuits in accordance with relevant standards. This includes wiring according to diagrams, using correct tools and techniques, performing continuity tests, and ensuring secure, insulated connections.
What you'll be able to do
- Wire electrical equipment and circuits in compliance with relevant regulations and standards
- Test electrical equipment and circuits to verify functionality and safety
- Wire electrical equipment and circuits correctly
- Test electrical equipment and circuits effectively
Wiring and testing programmable controller based systems Real unit · Excellence, Achievement & Learning Limited
This unit develops learners' ability to wire and test programmable controller based systems according to specifications. You'll interpret wiring diagrams, test system functionality, identify faults, and understand operational principles and safety requirements.
What you'll be able to do
- Wire and test programmable controller based systems according to specifications and safety guidelines.
- Demonstrate knowledge of the procedures for wiring and testing programmable controller based systems.
Working efficiently and effectively in engineering Real unit · Excellence, Achievement & Learning Limited
You'll develop the ability to work efficiently and effectively in engineering environments by organising work activities, communicating with colleagues, following health and safety procedures, and resolving problems promptly.
What you'll be able to do
- Work efficiently and effectively in engineering activities.
- Demonstrate knowledge of how to work efficiently and effectively in engineering environments.
Working efficiently and effectively in engineering Real unit · Excellence, Achievement & Learning Limited
Focuses on developing skills for working efficiently and collabouratively in various engineering contexts.
What you'll be able to do
- Demonstrate effective teamwork and efficiency in engineering tasks.
03The standards
The national standards these units are built against
What the job actually needs, in the words employers and awarding bodies already use for the work itself.
- Standard
Assist in the installation of instrumentation and control equipment used in food and drink operations
- Standard
Assist in the installation of instrumentation and control equipment used in food and drink operations
- Standard
Assisting in the installation of compressed air equipment
- Standard
Assisting in the installation of emergency electrical power generation equipment
- Standard
Assisting in the installation of environmental pollution control equipment
- Standard
Assisting in the installation of fresh water distribution equipment
- Standard
Assisting in the installation of refrigeration equipment
- Standard
Assisting in the installation of workplace environmental control equipment
- Standard
Carrying out fault diagnosis on escalator installations
- Standard
Carrying out fault diagnosis on lift installations
- Standard
Checking and setting lift installations
- Standard
Checking lift function
- Standard
Commission Electrical Systems and Equipment
- Standard
Commission Refrigeration Systems
- Standard
Commission air conditioning and heat pump systems
- Standard
Commission assets on the electricity network
- Standard
Commission broadcast and media systems
- Standard
Commission digital telecommunications or radio communication equipment
Showing 18 of 83 standards these units map to.
04Where it leads
The jobs these credits are mapped to
A qualification is never a dead end here. Each of these is a job record this qualification is a mapped route into.
- 1 record
- 1 record
- 1 record
Where this can lead
Lead Virtual Commissioning Engineer
This work can lead to leading engineering teams, becoming a senior technical expert, or moving into wider digital strategy roles.
See the whole journey05The credits
The credits, and who awards them
Level 3 credits are regulated, and they are awarded by Excellence, Achievement & Learning Limited rather than by Zavmo. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you have covered and what is next.
What you would be collecting
Assembling Structural Sub Assemblies to Produce a Public Service VehicleAssembling and testing electronic circuitsAssembling and testing fluid power systemsAssembling pattern, model and engineering woodwork componentsAssembling, wiring and testing electrical panels/components mounted in enclosuresCarrying Out Fault Diagnosis on Escalator InstallationsCarrying Out Fault Diagnosis on Lift InstallationsCarrying out aircraft detail fitting activities
Each one is a real unit registered against this qualification.
How you’d practise it
You don’t watch this. You do it.
You are not assessed on remembering this. You are assessed on applying it, analysing it, evaluating it and producing something. So that is what the practice is: projects, role play and your own live cases, with a tutor in the room.
The Navigator · your what-if tutor Illustration The Navigator Your plan for “Producing engineering project plans” assumes the same two people are free in March. What have you seen that makes you slightly uneasy about that?
You One of them has been pulled onto the migration twice already. Probably fine.
The Navigator That is the thread worth pulling. Let us build the version where it happens a third time and find the move that works either way.
- Bring your own plan Create
For “Producing engineering project plans” you bring the plan you are actually working on, not a case study. Zavmo pulls on the assumptions in it until the weak one shows.
- Draft the real one Create
You do “Using and interpreting engineering data and documentation” on a real document of your own. Zavmo works on the draft you have to send anyway, so the coursework and the job are the same piece of work.
- Map a live decision Analyse
“Assembling and testing fluid power systems” runs on a decision you are facing now. Zavmo maps it with you and shows what the second-order effect looks like before you find out the slow way.
What you leave holding
The standards this credential builds, in the shape the product keeps them
Nothing here is marked learned. There is no learner on a public page, so the map shows what the qualification covers rather than what anybody has done.
EAL Level 3 NVQ Extended Diploma in Installation and Commissioning
- Assist in the installation of instrumentation and control equipment used in food and drink operations
- Assisting in the installation of compressed air equipment
- Assisting in the installation of emergency electrical power generation equipment
- Assisting in the installation of environmental pollution control equipment
- Assisting in the installation of fresh water distribution equipment
- Assisting in the installation of refrigeration equipment
- Assisting in the installation of workplace environmental control equipment
- Carrying out fault diagnosis on escalator installations
How you would learn this
One to one, on the work you already do
A tutor sets the task against your own job and marks the reasoning, at your pace. There is no cohort to fall behind.
A lesson from Assembling Structural Sub Assemblies to Produce a Public Service Vehicle, one of this qualification's own units.
Applied to your work in any of these jobs
Which job do you mean?
This unit provides learners with the skills to interpret engineering drawings and assemble structural sub-assemblies for public service vehicles. Learners will ensure assemblies meet quality standards and tolerances.
How the thinking builds
- 1 Remember
- 2 Understand
- 3 Apply
- 4 Analyse
- 5 Evaluate
- 6 Create
It is £70 a month, billed monthly. Your free first module is Future Fluency, and you can cancel any time. Teaching towards this qualification begins when you subscribe.
Built for EAL Level 3 NVQ Extended Diploma in Installation and Commissioning
116 units in this credential, in the order it lists them, awarded by Excellence, Achievement & Learning Limited.
- Assembling Structural Sub Assemblies to Produce a Public Service Vehicle
- Assembling and testing electronic circuits
- Assembling and testing fluid power systems
- Assembling pattern, model and engineering woodwork components
- Assembling, wiring and testing electrical panels/components mounted in enclosures
- Carrying Out Fault Diagnosis on Escalator Installations
and 110 more in the full unit list below.
Free tools
Want a read on where you stand?
Three free tools, no account needed. Each one ends with a role, a level and a way in.
Learned on your own work, taught one-to-one.
Everything you just read, learned one-to-one on the job you already do. Your free first module is Future Fluency, so you can see how the teaching works before you pay for anything.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.
The title, level, credits, guided learning hours and unit learning outcomes on this page are taken from the Ofqual Register of Regulated Qualifications. Contains public sector information licensed under the Open Government Licence v3.0. Where this data comes from.