Excellence, Achievement & Learning Limited · RQF Level 2
EAL Level 2 Diploma in Industrial Coatings (Development Competence)
You don’t just earn this. You learn to use it, one-to-one, on your own real work.
- LevelRQF Level 2
- Total credits38
- Guided learning221 hours
- Units in this qualification17
Awarded by Excellence, Achievement & Learning Limited · on the Ofqual register
Start here
See how this course maps onto your role
Ten quick questions, one per Future Fluency, asked against this qualification rather than a generic one.
About 5 minutes · No card · Nothing to commit to
What you’ll learn
What each unit actually teaches you to do
Equip learners for success with EAL and its industry-leading engineering & manufacturing and BSE qualifications, developed and maintained by experts.
These are the units Excellence, Achievement & Learning Limited registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated, and every one you earn is yours to keep.
Applying finishes by hard anodisingReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Apply finishes by hard anodising techniques according to specified procedures
Applying hot dip treatmentsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Apply hot dip treatments to specified materials
- Prepare materials for hot dip treatments according to procedures
- Monitor and control the hot dip treatment process
- Inspect and assess the quality of hot dip treated materials
- Maintain a safe working environment during hot dip treatments
Applying liquid coatings by dippingReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Prepare components for liquid coating by dipping
- Apply liquid coatings to components using dipping techniques
- Control the dipping process to achieve the required coating thickness and quality
- Inspect coated components for defects
- Maintain dipping equipment and materials
Applying liquid coatings by spray methodsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Apply liquid coatings by spray methods, adhering to safety guidelines and quality standards
Applying powder coatingsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Apply powder coatings using appropriate equipment and techniques to achieve the desired finish
Applying surface finishes to composite mouldsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Prepare composite moulds for surface finishing
- Apply surface finishes to composite moulds according to specifications
- Inspect and assess the quality of the applied surface finish
- Use appropriate tools and equipment for applying surface finishes
- Maintain a safe working environment during the application of surface finishes
Carrying out chromic acid anodising operationsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Prepare components for chromic acid anodising
- Carry out chromic acid anodising operations according to specified procedures
- Control the anodising process to achieve the required coating properties
- Monitor and maintain the anodising bath
- Inspect anodised components for quality and compliance
Carrying out finishing by conversion coating methodsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Prepare components for finishing by conversion coating methods
- Apply finishing by conversion coating methods according to procedures
- Monitor and control the conversion coating process
- Inspect and assess the quality of finished components
- Maintain a safe working environment during finishing by conversion coating methods
Carrying out mechanical polishingReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Demonstrate the ability to carry out mechanical polishing operations to meet specified requirements and quality standards.
Carrying out sulphuric acid anodising operationsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Demonstrate the ability to carry out sulphuric acid anodising operations, ensuring adherence to process specifications and safety guidelines.
Carrying out tartaric sulphuric acid anodising operationsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Prepare components for tartaric sulphuric acid anodising operations
- Carry out tartaric sulphuric acid anodising operations according to procedures
- Monitor and control the anodising process
- Inspect and assess the quality of anodised components
- Maintain a safe working environment during tartaric sulphuric acid anodising operations
Carrying out zinc plating operationsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Demonstrate the ability to carry out zinc plating operations according to specified parameters and industry best practices.
Carrying out zinc‐rich coating operationsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Demonstrate the ability to carry out zinc-rich coating operations in accordance with established procedures and safety regulations.
Complying with statutory regulations and organisational safety requirementsReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Demonstrate compliance with all relevant statutory regulations applicable to the workplace.
- Adhere to organisational safety requirements and procedures at all times.
Fettling substratesReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Prepare substrates for fettling
- Carry out fettling operations to remove excess material
- Inspect fettled substrates for defects
- Use appropriate tools and equipment for fettling
- Maintain a safe working environment during fettling operations
Using and communicating technical informationReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Demonstrate the ability to use technical information effectively
- Demonstrate the ability to communicate technical information clearly and accurately
- Apply technical information to complete engineering tasks
- Interpret and follow technical drawings, specifications, and instructions
- Communicate technical information to colleagues and supervisors
Working efficiently and effectively in engineeringReal unit · Excellence, Achievement & Learning Limited
What you'll be able to do
- Work efficiently to meet deadlines and targets
- Work effectively as part of a team
- Apply safe working practices in an engineering environment
- Demonstrate effective problem-solving skills
- Maintain a clean and organised work area
The honest bit
You’ve started things before
Most courses were built for a room full of people who aren’t you. A cohort moves on whether or not your week allowed it, and by the third week the thing you’re behind on becomes the reason you stop opening it.
There’s no cohort here, and no timetable to fall behind. Before anything starts, Zavmo asks when you’re sharpest and how long you can realistically sit down for, then builds the sessions around those answers. A bad fortnight changes your pace. It doesn’t put you behind.
And you only pay once you start learning. Searching and planning are free, and you can cancel any time — so the cost of finding out is an afternoon, not a year.
Your passport
Every credit is a stamp you keep
Level 2 credits are regulated. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you’ve earned and what’s next.
Each stamp is a real unit registered against this qualification.
Who’d teach you this
The Evidence Evaluator
Assessor
Helps you show what you can actually do, gathering the evidence that proves it as you learn.
Meet all twelve tutorsWhere this connects
Where these credits take you
A qualification is never a dead end here. See the jobs its credits open, the national occupational standards its units map to, and the future skills they quietly build.
- Applying coatings by chemical conversion processes
- Applying finishes by hard anodising
- Applying finishes to composite mouldings
- Applying hot dip treatments
- Applying industrial coatings by electrophoretic or autophoretic methods
- Applying liquid coatings by dipping
- Applying liquid coatings by spray methods
- Applying powder coatings
Where this can lead
Compliance Training Specialist
Your career here is what you make it. We're committed to supporting your growth, whether you want to become a world-class instructional designer, a strategic programme manager, or even lead our entire compliance learning function. The opportunities are definitely there if you're willing to grab them.
See the whole journey →Skills it covers
What the job actually needs. These are the standards the units are built against, in the words employers and awarding bodies already use for the work itself.
How you’ll actually learn this
One-to-one, on your own real work
A qualification is usually something done to you: sit the class, sit the exam, hope it sticks. Here it’s the opposite. You learn it one-to-one with a companion, on your own real work, and you keep going until you can use it, not just recall it.
Applied to your work in any of these jobs
Learners will study the principles and procedures of hard anodising, including material preparation, application techniques, and inspection to ensure quality finishes meet specifications.
- Remember
- Understand
- Apply
- Analyse
- Evaluate
- Create
Built for EAL Level 2 Diploma in Industrial Coatings (Development Competence)
17 units in this credential, in the order it lists them, awarded by Excellence, Achievement & Learning Limited.
- Applying finishes by hard anodising
- Applying hot dip treatments
- Applying liquid coatings by dipping
- Applying liquid coatings by spray methods
- Applying powder coatings
- Applying surface finishes to composite moulds
and 11 more in the full unit list below.
One to one, not one to many
No two people run this the same way
A course is written once and handed to everyone. This is assembled around you, and keeps changing as it learns you. Five things it reads, and what each one changes.
- Your actual work Every unit is taught against a live piece of your own work, not a worked example from a textbook.
- What you already know The first conversation finds your starting point, so you skip what you can already do and spend the time on what you cannot.
- The conditions you learn under Not a learning-styles quiz. The evidence does not support those. The dimensions the research does back, read once and used to shape the plan.
- How far you got last time It picks up mid-thought. The tutor knows what you said, what you struggled with, and what it asked you to try.
- Which tutor suits the moment Twelve of them, each for a different kind of thinking. The one who walks you through a first idea is not the one who stress-tests it.
See how you learn, free. Eight questions, no sign-up. A directional taster; the diagnostic inside Zavmo goes deeper and keeps adapting.
Why it sticks
Most courses stop at remembering
There’s a well-known ladder of how deeply you learn something, called Bloom’s Taxonomy. Most courses get you up the first two rungs: you remember some facts, you pass a test, you forget it. Real skill lives at the top. Judging, deciding, creating. And this isn’t a generic ladder: every rung has a named Zavmo tutor who walks you up it.
- 6CreateThe Creative Catalyst
- 5EvaluateThe Evidence Evaluator
- 4AnalyseThe Analyst
- 3ApplyThe Coach
- 2UnderstandThe Connector
- 1RememberThe Builder
Where most courses leave you Where Zavmo takes you
The value
Why the companion is worth £70 a month
You’re not paying for the units. They’re regulated, and the same wherever you earn them. You’re paying for the one thing that decides whether you actually get there: a companion that makes them stick, on your real work.
That is one-to-one on this qualification, every day, on the work you already do, for £70 a month. Your first module is free, so you can see the teaching before you pay for any of it. Billed monthly, cancel any time and billing stops.
Earned on your own work, taught to the top.
Everything you just read, learned one-to-one on the job you already do. Your first module is free, so you can see the teaching before you pay for any of it.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.