AIM Qualifications · RQF Level 3
AIM Qualifications Level 3 Certificate In Medical Equipment Technologies
You don’t just earn this. You learn to use it, one-to-one, on your own real work.
- LevelRQF Level 3
- Total credits17
- Guided learning103 hours
- Units in this qualification13
Awarded by AIM Qualifications · on the Ofqual register
Start here
See how this course maps onto your role
Ten quick questions, one per Future Fluency, asked against this qualification rather than a generic one.
About 5 minutes · No card · Nothing to commit to
What you’ll learn
What each unit actually teaches you to do
These are the units AIM Qualifications registers against this qualification. It is a catalogue, not a syllabus. Which of them you take depends on the combination the qualification requires, and that is set by the awarding body rather than by us. Every unit here is regulated, and every one you earn is yours to keep.
Bio-Medical Equipment Electrical Safety TestingReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety with regard to bio-medical equipment.
- Understand relevant legislation, standards and guidance relating to bio-medical electrical safety testing.
- Understand electrical safety testing procedures for bio-medical equipment.
- Perform inspection and testing of bio-medical equipment in accordance with relevant legislation, standards and manufacturers information.
Health and Safety within Medical Equipment TechnologiesReal unit · AIM Qualifications
What you'll be able to do
- Understand the key elements of Health and Safety Policy at work.
- Know potential hazards in a medical environment.
- Maintain a safe working environment.
- Understand an individual’s responsibility for Health and Safety at work.
- Understand the purpose of risk assessment when working with medical equipment.
- Complete a risk assessment for a medical environment.
Medical Equipment NetworkingReal unit · AIM Qualifications
What you'll be able to do
- Understand how to establish a Local Area Network (LAN)
- Prepare hardware devices to establish a LAN
- Understand the basic principles of TCP/IP routing, IP addressing and DHCP operation
- Configure a network interface
- Perform basic TCP/IP network configuration on a network enabled medical device
- Apply basic troubleshooting techniques on a LAN
Servicing Anaesthetic EquipmentReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety in relation to anaesthetic equipment.
- Understand the principles of anaesthetic equipment operation.
- Understand electrical safety testing procedures for anaesthetic equipment.
- Assess anaesthetic equipment for electrical safety in accordance with regulations.
- Perform inspection, testing, fault finding and servicing of anaesthetic equipment in accordance with the relevant legislation, standards and manufacturer’s information.
Servicing Anaesthetic and Ventilation EquipmentReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety in relation to anaesthetic and ventilation equipment.
- Understand the principles of anaesthetic and ventilation equipment operation.
- Understand electrical safety testing procedures for anaesthetic and ventilation equipment.
- Check anaesthetic and ventilation equipment for electrical safety in accordance with regulations.
- Perform inspection, testing, fault finding and servicing of anaesthetic and ventilation equipment in accordance with the relevant legislation, standards and manufacturer’s information.
Servicing Cardiovascular EquipmentReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety with regard to cardiovascular equipment.
- Understand the principles of cardiovascular equipment operation.
- Understand the structure and function of the human heart.
- Understand electrical safety testing procedures for cardiovascular equipment.
- Perform inspection, testing, fault finding and servicing of cardiovascular equipment in accordance with the relevant legislation, standards and manufacturer’s information.
Servicing Dental EquipmentReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety in relation to dental equipment.
- Understand the principles of dental equipment operation.
- Understand electrical safety testing procedures for dental equipment.
- Assess dental equipment for electrical safety in accordance with regulations.
- Perform inspection, testing, fault finding and servicing of dental equipment in accordance with the relevant legislation, standards and manufacturer’s information.
Servicing Electro-Mechanical Assistive EquipmentReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety in relation to electro-mechanical assistive equipment.
- Understand electro-mechanical assistive equipment operation.
- Understand electrical safety testing procedures for electro-mechanical assistive equipment.
- Assess all electro-mechanical assistive equipment for electrical safety in accordance with regulations.
- Perform inspection, testing, fault finding and servicing of electro-mechanical assistive equipment in accordance with the relevant legislation, standards and manufacturer’s information.
Servicing Medical Imaging EquipmentReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety in relation to medical imaging equipment.
- Understand the principles of medical imaging equipment operation.
- Understand electrical safety testing procedures for medical imaging equipment.
- Assess medical imaging equipment for electrical safety in accordance with regulations.
- Perform inspection, testing, fault finding and servicing of medical imaging equipment in accordance with the relevant legislation, standards and manufacturer’s information.
Servicing Medical Therapeutic EquipmentReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety in relation to medical therapeutic equipment.
- Understand the principles of medical therapeutic equipment operation.
- Understand the structure and function of the nervous and muscular systems.
- Understand electrical safety testing procedures for medical therapeutic equipment.
- Check medical therapeutic equipment for electrical safety in accordance with regulations.
- Perform inspection, testing, fault finding and servicing of medical therapeutic equipment in accordance with the relevant legislation, standards and manufacturer’s i
Servicing Operating Theatre and Surgical EquipmentReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety in relation to operating theatre and surgical equipment.
- Understand the principles of operating theatre and surgical equipment.
- Understand electrical safety testing procedures for to operating theatre and surgical equipment.
- Assess operating theatre and surgical equipment for electrical safety in accordance with regulations.
- Perform inspection, testing, fault finding and servicing of operating theatre and surgical equipment in accordance with the relevant legislation, standards and manufacturer’s information.
Servicing Patient Beds, Trollies and Operating TablesReal unit · AIM Qualifications
What you'll be able to do
- Understand electrical safety testing procedures for medical equipment.
- Comply with statutory regulations and organisational safety requirements relating to Health and Safety within a medical engineering environment
- Complete performance verification checks on patient trollies, beds and operating tables.
- Perform inspection, fault finding and servicing on patient trollies. 5 Be able to perform inspection, testing, fault finding and servicing on patient beds.
- Perform inspection, testing, fault finding and servicing on operating tables.
Servicing Ventilation EquipmentReal unit · AIM Qualifications
What you'll be able to do
- Understand the principles of patient safety in relation to ventilation equipment.
- Understand the principles of ventilation equipment operation.
- Understand electrical safety testing procedures for ventilation equipment.
- Assess ventilation equipment for electrical safety in accordance with regulations.
- Perform inspection, testing, fault finding and servicing of ventilation equipment in accordance with the relevant legislation, standards and manufacturer’s information.
The honest bit
You’ve started things before
Most courses were built for a room full of people who aren’t you. A cohort moves on whether or not your week allowed it, and by the third week the thing you’re behind on becomes the reason you stop opening it.
There’s no cohort here, and no timetable to fall behind. Before anything starts, Zavmo asks when you’re sharpest and how long you can realistically sit down for, then builds the sessions around those answers. A bad fortnight changes your pace. It doesn’t put you behind.
And you only pay once you start learning. Searching and planning are free, and you can cancel any time — so the cost of finding out is an afternoon, not a year.
Your passport
Every credit is a stamp you keep
Level 3 credits are regulated. They don’t vanish when a subscription ends or a website closes. They travel to any employer, and Zavmo keeps the map of what you’ve earned and what’s next.
Each stamp is a real unit registered against this qualification.
Who’d teach you this

The Evidence Evaluator
Assessor
Helps you show what you can actually do, gathering the evidence that proves it as you learn.
Meet all twelve tutorsWhere this connects
Where these credits take you
A qualification is never a dead end here. See the jobs its credits open, the national occupational standards its units map to, and the future skills they quietly build.
- Acquire Magnetic Resonance images for diagnostic purposes
- Operate equipment required to support an intervention
- Programme and monitor implanted antiarrhythmic devices
- Servicing Anaesthetic and Ventilation Equipment
- Servicing Medical Imaging Equipment
- Servicing Medical Therapeutic Equipment
- Servicing cardiovascular equipment
- Servicing operating theatre and surgical equipment
Skills it covers
What the job actually needs. These are the standards the units are built against, in the words employers and awarding bodies already use for the work itself.
How you’ll actually learn this
One-to-one, on your own real work
A qualification is usually something done to you: sit the class, sit the exam, hope it sticks. Here it’s the opposite. You learn it one-to-one with a companion, on your own real work, and you keep going until you can use it, not just recall it.
Applied to your own work
- Remember
- Understand
- Apply
- Analyse
- Evaluate
- Create
Built for AIM Qualifications Level 3 Certificate In Medical Equipment Technologies
13 units in this credential, in the order it lists them, awarded by AIM Qualifications.
- Bio-Medical Equipment Electrical Safety Testing
- Health and Safety within Medical Equipment Technologies
- Medical Equipment Networking
- Servicing Anaesthetic Equipment
- Servicing Anaesthetic and Ventilation Equipment
- Servicing Cardiovascular Equipment
and 7 more in the full unit list below.
One to one, not one to many
No two people run this the same way
A course is written once and handed to everyone. This is assembled around you, and keeps changing as it learns you. Five things it reads, and what each one changes.
- Your actual work Every unit is taught against a live piece of your own work, not a worked example from a textbook.
- What you already know The first conversation finds your starting point, so you skip what you can already do and spend the time on what you cannot.
- The conditions you learn under Not a learning-styles quiz. The evidence does not support those. The dimensions the research does back, read once and used to shape the plan.
- How far you got last time It picks up mid-thought. The tutor knows what you said, what you struggled with, and what it asked you to try.
- Which tutor suits the moment Twelve of them, each for a different kind of thinking. The one who walks you through a first idea is not the one who stress-tests it.
See how you learn, free. Eight questions, no sign-up. A directional taster; the diagnostic inside Zavmo goes deeper and keeps adapting.
Why it sticks
Most courses stop at remembering
There’s a well-known ladder of how deeply you learn something, called Bloom’s Taxonomy. Most courses get you up the first two rungs: you remember some facts, you pass a test, you forget it. Real skill lives at the top. Judging, deciding, creating. And this isn’t a generic ladder: every rung has a named Zavmo tutor who walks you up it.
- 6CreateThe Creative Catalyst
- 5EvaluateThe Evidence Evaluator
- 4AnalyseThe Analyst
- 3ApplyThe Coach
- 2UnderstandThe Connector
- 1RememberThe Builder
Where most courses leave you Where Zavmo takes you
The value
Why the companion is worth £70 a month
You’re not paying for the units. They’re regulated, and the same wherever you earn them. You’re paying for the one thing that decides whether you actually get there: a companion that makes them stick, on your real work.
That is one-to-one on this qualification, every day, on the work you already do, for £70 a month. Your first module is free, so you can see the teaching before you pay for any of it. Billed monthly, cancel any time and billing stops.
Earned on your own work, taught to the top.
Everything you just read, learned one-to-one on the job you already do. Your first module is free, so you can see the teaching before you pay for any of it.
Build my plan, freeNo card. See how this qualification maps onto your role and meet the tutors who’d teach it, free. The learning begins when you subscribe. It’s £70 a month, billed monthly. Cancel any time and billing stops.